Rev1 Filament — Tested 3D Printing Materials & Value
Rev1’s own line of tested 3D printing filament — 31 materials from PLA and PETG to ABS, ASA, PC, Nylon and carbon/glass-fiber composites. Consistent quality, a full range from one supplier, strong value vs name brands, and US-based support and shipping from Auburn Hills, Michigan.
- Tested for consistency
- Full 31-material range
- Ships from US warehouse
- US phone support
Everyday, engineering, or reinforced.
Pick the material family that matches the job — easy everyday spools, tougher engineering resins for functional parts, or fiber-reinforced grades for stiffness and stability. Every Rev1 material is tested for consistency and backed by US-based support.
| Material | PLA | PETG | ABS | Nylon |
|---|---|---|---|---|
| Best for | Prototypes & models | Everyday functional parts | Tough enclosures | Load-bearing & wear parts |
| Ease of printing | Easiest | Easy | Moderate | Advanced |
| Strength | Low/Med | Medium | Med/High | High |
| Heat resistance | Low | Medium | High | High |
| Typical use | Concept & display | Brackets & fixtures | Automotive & outdoor | Functional end-use parts |
Qualitative guidance only — actual results depend on your printer, profile and part geometry. Carbon- and glass-fiber grades require a hardened, wear-resistant nozzle.
Every Rev1 filament — 31 materials, one supplier
From $22 everyday PLA to PAHT-CF composites — grouped by family so you can standardize your whole shop on one tested line. Tap any material for full details and specs.
PLA
7 materialsEasy, great-value everyday printing — matte, silk and CF variants included.
PETG
4 materialsTougher and more temperature-tolerant than PLA — a durable everyday step up.
ABS
6 materialsImpact- and heat-resistant engineering filament for tough, functional parts.
ASA
3 materialsUV- and weather-resistant — ABS-like strength built for outdoor and automotive use.
Nylon / PA
7 materialsHigh-durability, wear-resistant engineering nylons — including carbon/glass-fiber grades.
Polycarbonate / PC
3 materialsMaximum strength and heat resistance for demanding, load-bearing components.
HIPS
1 materialA dissolvable-friendly support and modeling material that pairs well with ABS.
Send us your part — we print it free in Rev1 filament.
Real parts in real Rev1 material, so you can judge the finish, color and consistency yourself before you buy a single spool. Ship it or email your file; you get the printed sample, the material and settings we used, and a straight recommendation on which Rev1 filament fits the job.
Free sample prints cover parts up to about 250 mm in standard materials (PLA, PETG, ABS, ASA, Nylon), one per qualified business. Oversized or production-quantity jobs are quoted case-by-case.
Tested consistency, a full range, and real US support
Rev1 filament is our own quality-controlled line — a consistent standard across 31 materials, priced for strong value against name brands, and backed by US warehousing, fast shipping and phone support.
Every Rev1 spool is a quality-controlled line held to a consistent standard, so diameter and color stay predictable roll to roll — fewer surprises, less re-tuning between spools.
PLA to PAHT-CF, plus carbon- and glass-fiber composites — 31 materials from a single source. Standardize your whole shop on one line instead of juggling brands.
Rev1 filament ships fast from our US warehouse and is backed by real phone support from Auburn Hills, Michigan — not an overseas ticket queue.
Backed by US-based support, warehousing and shipping.
Rev1 filament is Rev1 Technologies’ own tested line. Spools ship fast from our US warehouse, and material help, bulk pricing and phone support all come from Auburn Hills, Michigan — not an overseas ticket queue. Standardize your shop on one consistent line, and send us a part any time and we’ll print it free.
Built for the work you already do
Frequently asked questions
Which Rev1 material fits my part?
For prototypes, models and general-purpose parts, start with PLA or PETG — easy, reliable and great value. For functional parts that see heat, impact or the outdoors, step up to ABS, ASA, PC or Nylon. When you need extra stiffness and dimensional stability, choose a carbon- or glass-fiber composite. Not sure? Send us the part and we will print a free sample and recommend the material.
Are these open, standard 1.75 mm spools?
Yes. Rev1 filament is standard 1.75 mm and runs on any open-material 3D printer — Bambu, Prusa, Creality, Anycubic and more. You are not locked to one machine or ecosystem; just load the profile for the material you are printing.
Do the carbon- and glass-fiber grades need a special nozzle?
Yes. Carbon- and glass-fiber filaments (the -CF and -GF grades) are abrasive and will wear a standard brass nozzle quickly. Print them with a hardened steel or equivalent wear-resistant nozzle. The unfilled materials — PLA, PETG, ABS, ASA, PC, Nylon and HIPS — print fine on a standard nozzle.
How does Rev1 filament compare in value to name brands?
Rev1 is our own tested, quality-controlled line, priced to deliver strong value against name-brand spools while holding a consistent standard. You get a full 31-material range from one supplier, backed by US-based warehousing, shipping and phone support — so you can standardize your shop without paying a premium per roll.
Can I get a free sample print in Rev1 filament?
Yes. Send us your part or file and we will print a free sample (up to about 250 mm in standard materials), so you can judge the finish and material yourself before committing. One sample per qualified business; larger or production-quantity jobs we quote case-by-case.
Try Rev1 filament on your own part first
A free sample print or a same-day quote — either way you leave with a real Rev1-printed part in hand and a straight material recommendation.
For immediate assistance:
…