Rev1 PLA Matte Smooth, Flat Finish. No Hot End Upgrade Needed.

Standard PLA has a shiny, semi-glossy surface that makes layer lines stand out and parts look unfinished. Rev1 PLA Matte uses a matting additive in the formulation so the surface scatters light diffusely — the result is a consistent flat finish in every color, on every print, with no extra steps. Same print temperature, same bed adhesion, same ease of use as the PLA you already know.

Why matte finishes matter

Glossy filament reflects light unevenly, making layer lines, stringing, and surface imperfections visible under any angled light. Matte surfaces scatter light uniformly, hiding the texture of print layers and giving parts a clean, professional appearance — closer to injection molding than to 3D printing.

• Diffuse surface hides layer lines and minor surface artifacts
• No sanding, painting, or filler primer required
• Consistent matte finish across all 7 colors
• Same printability as standard PLA — no special settings

PLA Matte carries the same mechanical baseline as standard PLA: good rigidity, acceptable tensile strength for low-stress applications, and light weight. It is not an engineering-grade material — for high-load, high-temperature, or chemical-exposure applications, consider PETG, ABS, or PA from the Rev1 catalog.

Key property summary

• Tensile strength: ~50–60 MPa (typical PLA range)
• Flexural modulus: ~3.5 GPa — stiff for light-load housings and fixtures
• Elongation at break: ~3–6% — brittle compared to PETG or TPU
• HDT: ~55–60°C @ 0.45 MPa — not for under-hood or sunlit applications
• Density: ~1.24 g/cm³ — lighter than PETG or ABS

Values are representative of PLA Matte grades. Contact Rev1 for OEM-specific TDS.

Black and White ship same day from our Michigan warehouse. The remaining five colors are produced to order with a 1–3 week lead time at no premium over the in-stock price. Reserve your color today and receive a tracking number when it ships.

Color lineup

• Matte Black — charcoal flat black, ships from stock
• Matte White — warm off-white, ships from stock
• Matte Blue — deep steel blue, 1–3 weeks
• Matte Grey — neutral mid-grey, 1–3 weeks
• Matte Green — medium matte green, 1–3 weeks
• Matte Red — saturated matte crimson, 1–3 weeks
• Matte Wheat — warm tan, 1–3 weeks

All colors print at the same temperature and with the same settings. Select your color in the configurator above to see real-time availability and add to cart or place a preorder.

Rev1 PLA Matte is formulated to print at the same parameters as standard PLA. If you have a working PLA profile, use it as a starting point — you may need to increase temperature 5–10°C to ensure the matting additive melts fully and delivers a uniform finish.

Recommended print settings

Nozzle temperature

210–230°C

Bed temperature

50–60°C

Enclosure

Not required

Print speed

40–80 mm/s

Layer height

0.1–0.3 mm

Cooling fan

80–100%

For the cleanest matte finish, use 3–4 perimeters and 20–30% infill for decorative parts. Avoid very slow print speeds which can cause over-extrusion and surface sheen.

Because PLA Matte prints at standard PLA temperatures, it is fully compatible with any desktop FDM printer that accepts 1.75 mm filament — no enclosure, no all-metal hot end, no specialty hardware needed.

Verified compatible printer families

• Bambu Lab (A-series, P-series, X-series) — use Generic PLA profile
• Creality (Ender, CR, K-series)
• Prusa (MK-series, MINI)
• Ultimaker / Makerbot
• Raise3D, Dremel, Qidi Tech
• Any open-format FDM printer accepting 1.75 mm

Rev1 can provide slicer profiles for your printer on request. Call (248) 707-2950 or use the contact form below.

PLA Matte excels in applications where surface appearance matters and mechanical demands are moderate — display models, packaging mockups, architectural scale models, product prototypes, signage, cosplay props, and any decorative or presentational print where a professional look is more important than high strength or heat resistance.

Common use cases

• Architectural models and scale replicas
• Product design mockups and packaging protos
• Display pieces, trade-show models
• Signage, nameplates, labels
• Cosplay props and figurines
• Interior enclosures, bezels, and panels
• Educational models and training aids

PLA is hygroscopic and will absorb moisture from the air, leading to stringing, bubbling, and reduced surface quality. Rev1 PLA Matte ships sealed with a desiccant pack. After opening, reseal with desiccant or store in an airtight container.

Storage & drying guide

• Storage: Sealed bag or airtight container with desiccant
• Ideal humidity: below 20% RH
• Shelf life (sealed): 12–24 months
• Drying (if wet): 45–55°C for 4–6 hours in a filament dryer or oven
• Signs of moisture: popping/crackling sounds during print, rough surface, blobs

Rev1 stocks filament dryers and vacuum-seal accessories. Ask about a bundle at checkout or call (248) 707-2950.

PLA Matte is the right choice when you need a polished look without post-processing. It is not a performance upgrade over standard PLA — for functional, load-bearing, or outdoor parts, step up to PETG or ABS GF.