Parts & Accessories · Formlabs

Formlabs Post-Processing

Everything that happens after the print: automated washing and curing for Form series resin parts, finishing kits and solutions, and powder recovery and blasting for Fuse SLS — sold and supported by Rev1 from Michigan.

Wash & cureFinishing kitsWashing solutionsSLS powder & finishing
19 products
Brands: Formlabs
Ships from Auburn Hills, MI
Formlabs Post-Processing — Rev1 Technologies

Why post-processing matters

Resin (SLA) parts leave the printer coated in uncured resin and only partly cured. Washing removes residual resin, and post-curing with heat and 405 nm light completes the reaction for full strength, heat resistance and a non-tacky surface — and is required for biocompatible materials. SLS parts need depowdering, powder recovery and blasting.

Resin wash and cure

Form Wash V2Automated washing for Form 4, Form 3 and Form Studio 1 builds
Form Cure V2Most Form 4 parts post-cured in about 60 seconds
Form Wash L V2Wash one Form 4L or two Form 4 build platforms
Form Cure L V2Large-format curing with a 404 mm turntable
Form Studio Wash+CureWash and cure in one compact unit
Form Cure L V1Previous-generation large-format curing

Finishing kits and solutions

Form 4 Finish KitRinse buckets, tools and jig for Form 4 / 4B
Form 4L Finish Kit PackageLarge rinse bucket and cleaning tools for Form 4L / 4BL
Finishing ToolsPen sander, rotary tool and bits for sanding and polishing
Solvent PumpBattery pump to fill and empty Form Wash buckets
Resin Washing SolutionNon-flammable IPA alternative, 5 L
Ceramic Wash SolutionRequired wash for Alumina 4N ceramic parts, 5 L

SLS powder handling and finishing

Fuse SiftPowder recovery and mixing for Fuse 1 Series
Fuse BlastAutomated cleaning of a full build in about 15 minutes
Fuse Depowdering KitManual depowdering and sifting for Fuse 1 Series
Fuse Sift X1Large-format powder recovery for Fuse X1 · quote
Mix Kit X1Automatic powder blending for Fuse X1 · quote
Fuse Blast Polishing SystemSmooth, semi-gloss, dye-ready SLS parts

Also see the Fuse Blast High Capacity Kit, Polishing Media and Polishing Agent.

Post-processing, supported in the USA

Rev1 Technologies is an authorized Formlabs reseller in Auburn Hills, Michigan. We help you match wash, cure and finishing equipment to your printer, materials and volumes. See the whole line on the Formlabs brand page or call (248) 707-2950.

Frequently asked questions

Do I need Form Wash and Form Cure?Every Formlabs resin part must be washed and post-cured to reach its published properties. Form Wash and Form Cure automate both steps with validated settings for each Formlabs resin; Form Studio Wash+Cure combines them in one compact unit.
Which washer and curer fit Form 4L?Form Wash L V2 and Form Cure L V2 are sized for Form 4L and Form 4BL builds. Form Wash L V2 also takes two Form 4 build platforms.
Can I use something other than IPA?Yes. Form Wash supports IPA, TPM and Formlabs Resin Washing Solution, a non-flammable solution that dissolves nearly twice as much resin as IPA before saturating.
What do I need to post-process SLS parts?Fuse 1 Series parts are depowdered with the Fuse Depowdering Kit or Fuse Sift, then cleaned in Fuse Blast. Fuse X1 uses Fuse Sift X1 and Mix Kit X1 for powder handling.
Not sure what you need?

Get a matched post-processing setup

Tell us your printer, materials and volumes — we will recommend the right wash, cure and finishing equipment and quote it the same day.

Auburn Hills, Michigan's premier source for industrial 3D printers, 3D scanners, materials, and software. Serving engineers and manufacturers across North America.

Products
Company
Contact
Payment methods
AMEXApple PayGoogle PayPayPalShop PayUnionPayVISA
Pay over time

© 2026 Rev1 Technologies. All rights reserved.