POLISHING SYSTEM CONSUMABLE • FORMLABS • REV1 TECH

Formlabs Fuse Blast Polishing Media Smooth, Semi-Gloss SLS Parts

Specially formulated plastic beads that compact the part surface — and last more than 100 blast cycles.

Fuse Blast Polishing Media 4 L jug

Formlabs Fuse Blast Polishing Media consists of specially formulated plastic beads for use in Fuse Blast to deliver smooth, semi-gloss and dye-ready SLS parts. It smooths parts by compacting the surface, unlike abrasive polishing or chemical surface melting, and is designed for longevity, lasting over a hundred Blast cycles while resisting the breakdown that occurs with glass media. Polishing Media is larger and propelled at higher pressures than standard glass media. For use with the Fuse Blast Polishing System. Full specifications →

4 L2.5 kg jug
100+Blast cycles
5.2 kgHopper fill
Semi-glossDye-ready finish
Pairs With

Authorized Formlabs reseller in the USA — Rev1 plans SLS powder handling and finishing with your printer. Questions? Call (248) 707-2950.

Fuse Blast Polishing Media 4 L jug
Rev1 Technologies · Authorized Formlabs Partner

Factory-Built Precision. US-Supported by Rev1.

Fuse Blast Polishing Media is built and supported by Formlabs. Rev1 adds workflow and material guidance, onboarding, and US-based support from our Auburn Hills, Michigan team.

Authorized Formlabs Reseller Workflow & Material Guidance US Stock, Parts & Training
Formlabs — official manufacturer of Fuse Blast Polishing Media
FormlabsOfficial Manufacturer
Rev1 Technologies — authorized Formlabs reseller, Auburn Hills MI
Rev1 TechnologiesAuthorized Reseller
Why Choose Polishing Media

Built to polish, built to last.

Compacts, Not Abrades
Smooths by compacting the surface — no abrasive removal or chemical melting.
100+ Cycles
Lasts over a hundred Blast cycles, resisting the breakdown seen with glass media.
Higher Impact
Larger beads propelled at higher pressure than standard glass media.
Dye-Ready
Leaves a smooth, semi-gloss surface ready for dyeing.
Features

How Polishing Media works.

SLS part polished with the Polishing System beside a cleaned-only part

Polished vs. glass-blasted

Glass blasting leaves a rough, matte surface; Polishing Media compacts it to a smooth semi-gloss without removing material.

Semi-glossNo material removed
Fuse Blast Polishing Agent bottle

Conditioned by Polishing Agent

Polishing Agent, dosed from the Polishing Module, conditions the media to improve polish quality and prevent clogging.

Polishing Agent
Engineer holding a finished SLS intake manifold

For consumer-facing parts

Use it for end-use SLS parts that need improved feel and appearance.

End-use parts
Fuse Blast Polishing System module and consumables

Two jugs ship with the Polishing System

The Polishing System includes two 4 L jugs; order more as you run more cycles. Fuse Blast’s media hopper takes 5.2 kg of Polishing Media.

5.2 kg hopper fill
Works With

Part of the Polishing System.

For Fuse Blast with the Polishing System, polishing parts from Fuse X1, Fuse 1+ 30W and Fuse 1.

Formlabs Fuse Blast cleaning station
Fuse Blast
The cleaning station. View Fuse Blast →
Fuse Blast with the Polishing Module installed
Polishing System
The drop-in upgrade. View →
Fuse Blast Polishing Mesh
Polishing Mesh
Included with the Polishing System.
Compare

Polishing Media vs. glass media.

From Formlabs’ Fuse Blast and Polishing System specs.

Polishing MediaGlass media
PurposeClean and polish (impact polishing)Clean only
FinishSmooth, semi-gloss, dye-readyRough, matte
MediaPlastic beads, larger, higher pressure200–300 µm glass
Hopper fill5.2 kg13 kg
Lifetime> 100 cycles, resists breakdownBreaks down over time

Browse all Formlabs post-processing or the Formlabs brand page.

Specifications

Formlabs Fuse Blast Polishing Media Technical Data

Volume / Weight
4 L (2.5 kg)
Compatibility
Fuse Blast Polishing System (Fuse X1, Fuse 1+ 30W, Fuse 1 parts)
Lifetime
> 100 blasting cycles (no breakdown observed)
Fuse Blast Hopper Fill
5.2 kg of Polishing Media
SKU
FS1-FB-PME-01

RESOURCES

Downloads & Technical Support

Everything you need to choose and run Formlabs Fuse Blast Polishing Media with confidence.

Fuse Blast Polishing Media Technical Data
Formlabs-published specifications, compatibility, and what is included.
View specifications →
Post-Processing Guide
Wash, cure, and finishing settings and best practices for Formlabs materials.
Rev1 Technical Support
Application review, sample prints, and post-sales engineering guidance from Rev1 Technologies.

WHY REV1 TECH

Authorized Formlabs Reseller. Resin & SLS Production Specialists.

Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.

YOUR REV1 PARTNER
AUTHORIZED FORMLABS RESELLER
01
Application Engineering
We match post-processing equipment and consumables to your printer, materials, and volumes.
02
Onboarding & Training
Rev1 handles setup and operator training on PreForm, Dashboard, and the print-to-post workflow.
03
Ongoing Support
Direct access to Rev1’s technical team for resin guidance, troubleshooting, and maintenance.
04
Free Sample Print
Send us your STL. We’ll arrange a Formlabs sample part and ship it to you — or get an instant print quote.
05
In-Person Demo
Visit our Auburn Hills facility or schedule a demo at your site.
06
Consumables & Parts
Formlabs post-processing equipment, solvents, consumables, and spare parts — sourced and supported from the USA.
Buyer FAQ

Formlabs Fuse Blast Polishing Media — questions buyers ask.

How long does it last?
More than 100 blasting cycles, per Formlabs, without the breakdown seen with glass media.
Can I use it without the Polishing System?
No. It is designed for use with the Fuse Blast Polishing System, which doses Polishing Agent to condition it.
How much fills Fuse Blast?
The Fuse Blast media hopper takes 5.2 kg of Polishing Media — about two 4 L (2.5 kg) jugs.

FINISH EVERY PART RIGHT

Keep your Polishing System stocked

Order Polishing Media and Agent together — talk to Rev1 about consumables for your Fuse Blast.

Reply within 1 business day We validate fit — not just take orders Authorized Formlabs reseller in the USA US support & training

Auburn Hills, Michigan's premier source for industrial 3D printers, 3D scanners, materials, and software. Serving engineers and manufacturers across North America.

Products
Company
Contact
Payment methods
AMEXApple PayGoogle PayPayPalShop PayUnionPayVISA
Pay over time

© 2026 Rev1 Technologies. All rights reserved.