POLISHING SYSTEM CONSUMABLE • FORMLABS • REV1 TECH

Formlabs Fuse Blast Polishing Agent Conditions Media for a Better Polish

Improves polishing quality and prevents media clogging — 7 mL lasts about six hours of blasting.

Fuse Blast Polishing Agent 115 mL bottle with dosing syringe

Formlabs Fuse Blast Polishing Agent conditions the Fuse Blast Polishing Media to improve polishing quality and prevent media clogging. It is a liquid solution diluted with water in the Polishing Module water tank: 7 mL of agent in 750 mL of water lasts approximately 6 hours of blasting. For use with the Fuse Blast Polishing System. Full specifications →

115 mLBottle
7 mLPer 750 mL water
~6 hBlasting per dilution
~2 mL/minFlowrate
Pairs With

Authorized Formlabs reseller in the USA — Rev1 plans SLS powder handling and finishing with your printer. Questions? Call (248) 707-2950.

Fuse Blast Polishing Agent 115 mL bottle with dosing syringe
Rev1 Technologies · Authorized Formlabs Partner

Factory-Built Precision. US-Supported by Rev1.

Fuse Blast Polishing Agent is built and supported by Formlabs. Rev1 adds workflow and material guidance, onboarding, and US-based support from our Auburn Hills, Michigan team.

Authorized Formlabs Reseller Workflow & Material Guidance US Stock, Parts & Training
Formlabs — official manufacturer of Fuse Blast Polishing Agent
FormlabsOfficial Manufacturer
Rev1 Technologies — authorized Formlabs reseller, Auburn Hills MI
Rev1 TechnologiesAuthorized Reseller
Why Use Polishing Agent

A small dose for a consistent finish.

Better Polish
Conditions the Polishing Media to improve polishing quality.
No Clogging
Helps prevent media clogging during blasting.
Long-Lasting
7 mL in 750 mL of water lasts about 6 hours of blasting.
Simple Dosing
Dilute in the Polishing Module water tank; the module doses it into the blast stream.
Features

How Polishing Agent is used.

Fuse Blast Polishing System module and consumables

Diluted in the Polishing Module

Add 7 mL of agent to the module’s 750 mL water tank. The module doses and aerosolizes it into the blast stream.

7 mL per 750 mL
Fuse Blast Polishing Media 4 L jug

Conditions the Polishing Media

The agent conditions the plastic Polishing Media beads to improve polishing quality and prevent clogging.

Polishing Media
SLS part polished with the Polishing System beside a cleaned-only part

Smooth, semi-gloss results

Properly conditioned media compacts the surface for a semi-gloss, dye-ready finish.

Semi-gloss
Blast nozzle in the Fuse Blast basket

About 6 hours per dilution

One 7 mL dose in a full 750 mL tank lasts approximately 6 hours of blasting, per Formlabs.

~6 hours
Works With

Part of the Polishing System.

For Fuse Blast with the Polishing System, polishing parts from Fuse X1, Fuse 1+ 30W and Fuse 1.

Formlabs Fuse Blast cleaning station
Fuse Blast
The cleaning station. View Fuse Blast →
Fuse Blast with the Polishing Module installed
Polishing System
The drop-in upgrade. View →
Fuse Blast Polishing Mesh
Polishing Mesh
Included with the Polishing System.
Compare

Polishing System consumables.

What each refill does and how long it lasts, per Formlabs.

Polishing AgentPolishing Media
RoleConditions the media; prevents cloggingPlastic beads that compact the part surface
Unit115 mL bottle4 L (2.5 kg) jug
Lifetime7 mL ≈ 6 h of blasting> 100 blasting cycles
Price$49$349

Browse all Formlabs post-processing or the Formlabs brand page.

Specifications

Formlabs Fuse Blast Polishing Agent Technical Data

Volume
115 mL
Compatibility
Fuse Blast Polishing System (Fuse X1, Fuse 1+ 30W, Fuse 1 parts)
Dilution
7 mL in 750 mL water
Lifetime
~6 hours of blasting per dilution
SKU
FS1-FB-PMA-01

RESOURCES

Downloads & Technical Support

Everything you need to choose and run Formlabs Fuse Blast Polishing Agent with confidence.

Fuse Blast Polishing Agent Technical Data
Formlabs-published specifications, compatibility, and what is included.
View specifications →
Post-Processing Guide
Wash, cure, and finishing settings and best practices for Formlabs materials.
Rev1 Technical Support
Application review, sample prints, and post-sales engineering guidance from Rev1 Technologies.

WHY REV1 TECH

Authorized Formlabs Reseller. Resin & SLS Production Specialists.

Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.

YOUR REV1 PARTNER
AUTHORIZED FORMLABS RESELLER
01
Application Engineering
We match post-processing equipment and consumables to your printer, materials, and volumes.
02
Onboarding & Training
Rev1 handles setup and operator training on PreForm, Dashboard, and the print-to-post workflow.
03
Ongoing Support
Direct access to Rev1’s technical team for resin guidance, troubleshooting, and maintenance.
04
Free Sample Print
Send us your STL. We’ll arrange a Formlabs sample part and ship it to you — or get an instant print quote.
05
In-Person Demo
Visit our Auburn Hills facility or schedule a demo at your site.
06
Consumables & Parts
Formlabs post-processing equipment, solvents, consumables, and spare parts — sourced and supported from the USA.
Buyer FAQ

Formlabs Fuse Blast Polishing Agent — questions buyers ask.

How do I use it?
Dilute 7 mL in the 750 mL water tank of the Polishing Module; the module doses it into the blast stream.
How long does it last?
About 6 hours of blasting per 7 mL dose, per Formlabs.
Do I need the Polishing System?
Yes. Polishing Agent is for use with the Fuse Blast Polishing System.

FINISH EVERY PART RIGHT

Keep your Polishing System stocked

Order Polishing Agent and Media together — talk to Rev1 about consumables for your Fuse Blast.

Reply within 1 business day We validate fit — not just take orders Authorized Formlabs reseller in the USA US support & training

Auburn Hills, Michigan's premier source for industrial 3D printers, 3D scanners, materials, and software. Serving engineers and manufacturers across North America.

Products
Company
Contact
Payment methods
AMEXApple PayGoogle PayPayPalShop PayUnionPayVISA
Pay over time

© 2026 Rev1 Technologies. All rights reserved.