FUSE BLAST UPGRADE • FORMLABS • REV1 TECH

Formlabs Fuse Blast Polishing System Consumer-Ready SLS Parts

A drop-in upgrade that cleans and polishes SLS parts to a smooth, semi-gloss, dye-ready finish in one step.

Formlabs Fuse Blast Polishing System module, media and agent

The Formlabs Fuse Blast Polishing System is a drop-in upgrade to Fuse Blast that adds a smooth, semi-gloss, scuff-resistant and dye-ready surface finish to SLS printed parts. This single-step add-on both cleans and polishes parts straight from Fuse Sift, without a second blast. The Polishing Module doses and aerosolizes a small amount of Polishing Agent solution in the blast stream to condition the Polishing Media, which compacts the part surface — similar to shot peening — without removing material. Full specifications →

20–60 minPolishing time
100+Media cycles
60 PSIMin. pressure
750 mLWater tank
Finish
Semi-glossScuff-resistantDye-ready

Authorized Formlabs reseller in the USA — Rev1 plans SLS powder handling and finishing with your printer. Questions? Call (248) 707-2950.

Formlabs Fuse Blast Polishing System module, media and agent
Rev1 Technologies · Authorized Formlabs Partner

Factory-Built Precision. US-Supported by Rev1.

Fuse Blast Polishing System is built and supported by Formlabs. Rev1 adds workflow and material guidance, onboarding, and US-based support from our Auburn Hills, Michigan team.

Authorized Formlabs Reseller Workflow & Material Guidance US Stock, Parts & Training
Formlabs — official manufacturer of Fuse Blast Polishing System
FormlabsOfficial Manufacturer
Rev1 Technologies — authorized Formlabs reseller, Auburn Hills MI
Rev1 TechnologiesAuthorized Reseller
Why Choose the Polishing System

Professional SLS finishes without another machine.

Consumer-Ready Parts
A smooth, semi-gloss, dye-ready surface for customer-facing applications.
All-in-One
Upgrade any Fuse Blast to clean and polish in a single step, straight from Fuse Sift.
Reliable Outcomes
Compacting the surface, rather than abrasive smoothing or chemical melting, reduces roughness without removing material.
Cost-Effective
Formlabs calls it the most affordable SLS surface-finishing solution, without standalone units or specialized training.
Features

How impact polishing works.

SLS part polished with the Polishing System beside a cleaned-only part

Polished vs. cleaned

Standard glass blasting leaves a rough, matte surface. The Polishing System cleans and smooths in one step through impact polishing for a semi-gloss finish.

Semi-glossNo material removed
Fuse Blast Polishing Media 4 L jug

Polishing Media that lasts

Specially formulated plastic beads, larger and propelled at higher pressure than glass media, last more than 100 blasting cycles without breakdown.

2× 4 L included100+ cycles
Fuse Blast Polishing Agent bottle with dosing syringe

Polishing Agent conditions the media

7 mL of Polishing Agent diluted in the 750 mL water tank conditions the media at about 2 mL per minute; one bottle lasts around 130 cycles at 45 minutes.

7 mL per 750 mL~2 mL/min
Engineer holding a finished SLS intake manifold

60 PSI with Adaptive Airflow

A minimum blasting pressure of 60 PSI is recommended. Fuse Blast’s Adaptive Airflow lets lower-capacity compressors keep up by pausing while the compressor recharges.

60 PSI minimumAdaptive Airflow
Finish

Consumer-grade surfaces

Parts come out smooth, scuff-resistant and ready to dye.

Watch the Video

The Polishing System in action

Formlabs’ video shows Fuse Blast cleaning and polishing SLS parts with the Polishing System.

Works With

An upgrade for Fuse Blast.

For parts from Fuse X1, Fuse 1+ 30W and Fuse 1.

Formlabs Fuse Blast cleaning station
Fuse Blast
Required — the system drops into Fuse Blast. View Fuse Blast →
Formlabs Fuse X1 industrial SLS 3D printer
Fuse X1
Industrial SLS. View Fuse X1 →
Formlabs Fuse 1+ 30W SLS 3D printer
Fuse 1+ 30W
Benchtop industrial SLS. View Fuse 1+ 30W →
In the Box

The Polishing System includes:

Fuse Blast Polishing ModuleFuse Blast Polishing MeshFuse Blast Polishing Media 4 L (2.5 kg) × 2Fuse Blast Polishing Agent 115 mL
Compare

Fuse Blast with and without the Polishing System.

Same Fuse Blast; the Polishing System is a drop-in upgrade.

Fuse Blast (standard)Fuse Blast + Polishing System
Surface resultClean to the touch, matteSmooth, semi-gloss, scuff-resistant, dye-ready
Media200–300 µm glass media (13 kg fill)Polishing Media (5.2 kg fill), 100+ cycles
ProcessClean in one cycleClean and polish in one cycle, straight from Fuse Sift
ConsumablesGlass mediaPolishing Media + Polishing Agent
Price$13,999+ $2,699 upgrade

Browse all Formlabs post-processing or the Formlabs brand page.

Specifications

Formlabs Fuse Blast Polishing System Technical Data

Compatibility
Fuse Blast (parts from Fuse X1, Fuse 1+ 30W, Fuse 1)
Blast Polishing Time
20–60 minutes
Polishing Media Lifetime
> 100 blasting cycles (no breakdown observed)
Blasting Pressure
60 PSI minimum recommended
Polishing Agent Use
7 mL in 750 mL water; one bottle lasts ~130 cycles at 45 minutes
Recommended Flowrate
2 mL / minute
Water Tank Volume
750 mL
SKU
PKG-FS1-FB-PS-01

RESOURCES

Downloads & Technical Support

Everything you need to choose and run Formlabs Fuse Blast Polishing System with confidence.

Fuse Blast Polishing System Technical Data
Formlabs-published specifications, compatibility, and what is included.
View specifications →
Post-Processing Guide
Wash, cure, and finishing settings and best practices for Formlabs materials.
Rev1 Technical Support
Application review, sample prints, and post-sales engineering guidance from Rev1 Technologies.

WHY REV1 TECH

Authorized Formlabs Reseller. Resin & SLS Production Specialists.

Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.

YOUR REV1 PARTNER
AUTHORIZED FORMLABS RESELLER
01
Application Engineering
We match post-processing equipment and consumables to your printer, materials, and volumes.
02
Onboarding & Training
Rev1 handles setup and operator training on PreForm, Dashboard, and the print-to-post workflow.
03
Ongoing Support
Direct access to Rev1’s technical team for resin guidance, troubleshooting, and maintenance.
04
Free Sample Print
Send us your STL. We’ll arrange a Formlabs sample part and ship it to you — or get an instant print quote.
05
In-Person Demo
Visit our Auburn Hills facility or schedule a demo at your site.
06
Consumables & Parts
Formlabs post-processing equipment, solvents, consumables, and spare parts — sourced and supported from the USA.
Buyer FAQ

Formlabs Fuse Blast Polishing System — questions buyers ask.

Do I need Fuse Blast?
Yes. The Polishing System is a drop-in upgrade for Fuse Blast.
How long does polishing take?
20–60 minutes per cycle, per Formlabs.
What compressor do I need?
At least 60 PSI is recommended. Adaptive Airflow pauses the cycle so lower-capacity compressors can recharge.
How long do the consumables last?
Polishing Media lasts over 100 cycles; one bottle of Polishing Agent lasts about 130 cycles at 45 minutes.
Does it remove material?
No. It compacts the surface, similar to shot peening, rather than abrading or melting it.
What is in the box?
The Polishing Module, Polishing Mesh, two 4 L jugs of Polishing Media and a 115 mL Polishing Agent.

FINISH EVERY PART RIGHT

Polish SLS parts in Fuse Blast

Talk to a Rev1 specialist about adding the Polishing System to your Fuse Blast — we’ll check your compressor first.

Reply within 1 business day We validate fit — not just take orders Authorized Formlabs reseller in the USA US support & training

Auburn Hills, Michigan's premier source for industrial 3D printers, 3D scanners, materials, and software. Serving engineers and manufacturers across North America.

Products
Company
Contact
Payment methods
AMEXApple PayGoogle PayPayPalShop PayUnionPayVISA
Pay over time

© 2026 Rev1 Technologies. All rights reserved.