Industrial SLA 3D Printers Compared — Kings 3D
Industrial SLA (stereolithography) cures liquid resin with a laser to build highly accurate parts with a smooth finish — the technology of choice for master patterns, investment- and vacuum-casting patterns, and accurate one-piece prototypes. The standard Kings SLA Pro machines span a 600 mm envelope up to a full metre: the 600, 800 and 1000 Pro, all sharing a 355 nm solid-state laser, Variable Beam optics (0.08–0.8 mm), 15 m/s scanning and a full-marble structural frame. This page compares the three; for parts larger than a metre, see the large-format SLA range.
Comparing more widely? See all Kings 3D printers.
- 600 mm – 1 m build
- Variable Beam 0.08–0.8 mm
- Full-marble frame
- US DDP install & support

Choosing a Kings 3D industrial sla machine
The decisions that actually matter for this class of machine — size them to your parts, not to a spec sheet.
Build size
Size the machine to your largest single part. The 600 Pro gives 600 × 600 × 400 mm, the 800 Pro 800 × 800 × 500 mm, and the 1000 Pro a full metre at 1000 × 1000 × 600 mm — print in one piece instead of sectioning and bonding.
Accuracy & optics
All use Variable Beam optics (0.08–0.8 mm) and a 355 nm Nd:YVO₄ solid-state laser with closed-loop galvos at 15 m/s — a small spot for fine detail and a large spot for fast fill, on the same machine.
Stability & materials
A full-marble frame (recoater, elevator and scan base) keeps builds dimensionally stable. Rev1 supplies Kings resins and helps match the material to casting patterns, clear parts or tough functional prototypes.
Choose by part size
Largest part inside 600 × 600 × 400 mm: the 600 Pro. Up to 800 × 800 × 500 mm: the 800 Pro. Up to 1000 × 1000 × 600 mm: the 1000 Pro. Usable size depends on orientation and supports, so send us the CAD for a fit check.
Site & installation
Plan for the machine itself: 118 × 129 × 217 cm and 990 kg (600 Pro), 140 × 149 × 243 cm and 1,370 kg (800 Pro), or 160 × 170 × 243 cm and 1,630 kg (1000 Pro), on 1.5–1.8 KVA single-phase power in a 20–26 °C room under 40% RH.
Consumables
The first tank fill grows with the machine: about 225–240 kg (600 Pro), 475–500 kg (800 Pro) and 850 kg (1000 Pro), plus wash and UV post-cure equipment sized to your largest part.
Install & support
These are capital systems — Rev1 quotes a DDP package including delivery, installation, commissioning and operator training, with US-based support and financing on approved credit.
Need bigger?
If your part is larger than a metre, step up to the large-format Kings SLA range (1200 Pro dual-laser through the 2.7 m 2700 Pro).
Compare the Kings industrial SLA machines
| Model | Build volume (mm) | Machine size (cm) | Weight | Power | First resin fill | Best for |
|---|---|---|---|---|---|---|
| Kings SLA 600 Pro | 600 × 600 × 400 | 118 × 129 × 217 | 990 kg | 1.5 KVA | 225–240 kg | Small and medium detailed parts & prototypes |
| Kings SLA 800 Pro | 800 × 800 × 500 | 140 × 149 × 243 | 1,370 kg | 1.5 KVA | 475–500 kg | Medium and large models, panels & housings |
| Kings SLA 1000 Pro | 1000 × 1000 × 600 | 160 × 170 × 243 | 1,630 kg | 1.8 KVA | 850 kg | Metre-class one-piece prototypes & patterns |
All share a 355 nm Nd:YVO₄ laser with Variable Beam spot (0.08–0.8 mm), 15 m/s scan speed, 0.05–0.2 mm layers and a full-marble frame. Figures from Kings 3D; its product pages and technical data sheets differ on the 600 and 800 Pro first resin fill, so Rev1 confirms it at quote. Quote-only; Rev1 quotes a DDP package with installation, commissioning and training.
Kings 3D Industrial SLA printers we sell & support



Built for the work you already do
Frequently asked questions
What is industrial SLA and when should I choose it?
Stereolithography (SLA) cures liquid resin with a laser to build highly accurate parts with a smooth surface finish. Choose it for master patterns, investment- or vacuum-casting patterns, and one-piece prototypes where dimensional accuracy and finish matter most.
Which size — 600, 800 or 1000 Pro?
Size to your largest single part. If it fits inside 600 mm, the 600 Pro is the efficient choice; up to 800 mm, the 800 Pro; up to a full metre, the 1000 Pro. Send us the part and we will tell you which machine is enough.
What materials do Kings SLA printers run?
Kings 355 nm SLA resins covering casting patterns, clear parts and tough functional prototypes. Rev1 supplies Kings resin and helps match the material to your application.
What does my site need?
The machines weigh 990 kg (600 Pro), 1,370 kg (800 Pro) and 1,630 kg (1000 Pro), so plan route access, clearance and a floor-load assessment. They run on 200–240 VAC single-phase at 1.5 KVA (600 and 800 Pro) or 1.8 KVA (1000 Pro), in a 20–26 °C room under 40% relative humidity. Rev1 runs a facility readiness review before delivery.
How much resin does each model need to start?
The first tank fill is about 225–240 kg for the 600 Pro, 475–500 kg for the 800 Pro and 850 kg for the 1000 Pro (Kings 3D publishes slightly different figures for the 600 and 800 Pro, so Rev1 confirms yours at quote). Budget ongoing resin on top of that for your build volume.
When is it worth moving up a size?
Move up when your largest part, after orientation and supports, no longer fits: past 600 × 600 × 400 mm go to the 800 Pro, past 800 × 800 × 500 mm go to the 1000 Pro, and past a metre go to the large-format range. A bigger machine also means more floor load, power and resin, so we size to the part rather than the biggest envelope.
My part is bigger than a metre — what then?
Step up to the large-format Kings SLA range: the dual-laser 1200 Pro, 1450 Pro, 1700 Pro and the 2.7-metre 2700 Pro.
How are these priced, delivered and supported?
They are capital systems sold by quote. Rev1 quotes a DDP package that includes delivery, installation, commissioning and operator training, with US-based support and financing on approved credit.
Can’t find your answer? Browse the support knowledge base for setup, calibration and troubleshooting guides, or open a support ticket.
Tell us your part — we’ll quote the right SLA machine
Send the part or the envelope you need and our application engineers will recommend the Kings SLA Pro model, the resin, and a DDP package with installation and training. Or browse the full Kings lineup.
Already own Kings 3D? Knowledge base & guides · Open a support ticket