Industrial CT Scanners
Industrial computed-tomography scanners — see inside a part non-destructively to inspect internal geometry, voids, and assemblies, and reverse-engineer hidden features.

What is industrial CT scanning?
Industrial computed tomography (CT) uses X-rays to build a full 3D volume of a part — inside and out — without cutting it open. It reveals internal geometry, voids, porosity, and assembly fit that surface scanners and touch probes can't reach.
When you need CT
What CT delivers
- Non-destructive first-article and failure analysis.
- Full internal + external dimensional data in one scan.
- Reverse engineering of parts with hidden internal geometry.
Industrial CT vs metrology CT vs medical CT
What voxel size do you need?
The voxel is the smallest 3D pixel in a CT scan. The smallest feature or defect you need to see should span several voxels, and smaller parts can be scanned at higher magnification for finer voxels. The NAOMi-CT 3D-M reaches an 80 µm minimum voxel for smaller parts up to Φ250 mm. The NAOMi-CT 3D-L takes larger samples up to Φ300 mm and about 20 kg with a 95 µm minimum voxel.
Buy a CT scanner or outsource scans?
Outsourcing works for occasional scans. An in-house system pays off when you inspect regularly, need fast turnaround on first-article and failure analysis, or cannot send sensitive parts outside. Self-shielded cabinets such as NAOMi-CT run on the shop floor without a dedicated radiation room. Not sure yet? Send us a part and we will scope a sample CT scan before you buy. See the full NAOMi-CT lineup.
CT scanners, supported in the USA
Rev1 sells and supports industrial and metrology CT systems. Rev1 Technologies is your US reseller and support partner in Auburn Hills, Michigan — real people who use this gear, fast domestic shipping, no customs wait. Use the brand filter to narrow the range, or call (248) 707-2950 for help choosing.

