Formlabs Form 4L Big Parts, Blazing Fast
A 24-liter build volume that finishes full-size prints in under six hours.
The Formlabs Form 4L is a large-format masked stereolithography (MSLA) resin 3D printer that brings the Low Force Display™ engine to a 353 × 196 × 350 mm build volume — 4.6× the size of Form 4. A 145-LED collimated backlight, a 46 µm Light Processing Unit, and dual resin cartridges let it print a full platform of production parts, or one part the size of a car seat shell, in a single working day. Full specifications →
Order the Basic Package online, or switch package above. Complete and Premium packages with Form Wash L and Form Cure L are quoted by Rev1 — call (248) 707-2950 or request a quote.

Factory-Built Precision. US-Supported by Rev1.
Every Form 4L passes a 60-point calibration and quality-control inspection before it leaves the Formlabs factory. Because it is a 58.5 kg machine with an 89 × 117 cm access footprint, Rev1 also plans delivery, placement, power, and ventilation with you before it ships.

Solve big problems with big parts — without waiting days for them.
Large-format resin printing used to mean an overnight or multi-day job and a nervous morning. Form 4L keeps the scale and removes the wait: the same Low Force Display™ architecture as Form 4, stretched across a 692 cm² platform and a 350 mm Z height, with the material library and automation of a production machine.
What a 24-liter resin printer gets used for.
From weld-cell setup fixtures to boat trim and lattice structures, Form 4L covers the parts that are too big for a desktop printer and too urgent for an outside service bureau.



The LFD engine, scaled to large format.
Form 4L replaces the dual-laser optics of the Form 3L with a large-area Low Force Display™ engine that cures an entire layer at once. Print time now depends on part height, not on how much of the platform you fill.
145 LEDs, collimated edge to edge
The Form 4L Backlight Unit projects ultra-high-power light from 145 uniform-wavelength LEDs through a plano-convex lens array, with integrated air cooling. Uniform, straight light is what lets a part in the far corner of a 692 cm² platform cure exactly like one in the center — essential when you fill the whole build area with production parts.
46 µm pixels across a large-format mask
The LPU 4L masks the backlight into each layer’s shape at a 46 µm pixel size with factory-tuned anti-aliasing for sub-pixel edges — finer than the Form 4’s 50 µm. Formlabs built it to be long-lasting, resistant to accidental damage, and easy to replace, so the largest optical part in the printer does not dictate your uptime.
Low peel forces matter most on big cross-sections
Peel force grows with layer area, which is why large resin parts have historically printed slowly or failed. A micro-textured optical film on top of the LPU lets air flow between the tank and the display, so even a wide layer releases gently. The result: fast layers, intact fine features on big parts, and light-touch supports that leave small witness marks.
4.6× the volume of Form 4 — one big part or dozens of small ones.
353 × 196 × 350 mm in one print
Form 4L’s build platform scales up from the Form 4’s 200 × 125 mm to 353 × 196 mm, and the Z axis climbs to 350 mm. That 24.2-liter envelope swallows a full-size product housing, a car-seat shell, or a vacuum-forming mold without sectioning the model.
Or fill the platform and batch-produce
Because LFD cures every part on a layer at the same time, a platform packed with clips, brackets, and housings prints in about the same time as one tall part. Teams use that to run short production batches, bridge-to-tooling volumes, or a whole week of prototype requests in a single overnight-free job.
Long parts without seams
Interior panels, ducts, and trim are often too long for a desktop printer, so they get split into segments and bonded — adding fit-up error and finishing time. On Form 4L those parts print whole, oriented to minimize supports, and come out ready for fit and function testing.
Stunning large parts that always fit.
Most accurate assemblies
Form 4L holds ±0.15% XY on 1–30 mm features and ±0.3% on features up to 150 mm, so screw bosses, snap fits, and port cutouts on a full laptop chassis land where the CAD says. On restorative dental models in Precision Model Resin, Formlabs measures 99.9% of surfaces within 100 µm of the CAD model.
Sharpest details, smoothest surfaces
Highly collimated light, a 46 µm pixel with pre-tuned anti-aliasing, and light-touch supports carry fine texture across a large surface — like the tread pattern on this clear outsole mold. Molds and tooling come off the printer with the surface quality needed to cast or form directly.



Speed at scale: large prints in under six hours.
Same lacrosse head, four machines
Formlabs printed the same lacrosse head on four printers. Form 4L finished in 4 h 54 min — against 14 h 24 min on a leading FDM printer, 62 h 32 min on a benchmark FDM printer, and 21 h 57 min on the previous-generation Form 3L. Peak speed is 80 mm per hour; across all materials Form 4L averages 24 mm per hour, in a 20–35 mm/hr range by material.



The launch film: LFD at desktop and large format
Formlabs’ official launch video introduces the Low Force Display™ platform on both Form 4 and Form 4L — the print engine, the workflow, and the full-size parts customers print with it.
Two cartridges, automatic dispensing, six sensors.
Dual Resin Cartridge V2 for big jobs
Large parts consume a lot of resin, so Form 4L takes two Resin Cartridge V2 cartridges and dispenses from them automatically as the print needs it. Material changes still take under a minute. Complete and Premium packages add the Form 4 Resin Pump for bulk feeding on high-volume jobs.
A large-format tank rated for 75,000+ layers
The Form 4L Resin Tank uses the same dual-layer flexible film stack as Form 4, sized for the large platform. It provides the cure surface for every layer and keeps peel forces low; Formlabs rates it for 75,000+ layers with any Formlabs material, and the Form 4L Mixer keeps resin homogeneous through long prints.
Six sensors holding every print to spec
Six upgraded control systems watch the conditions every material was validated against: high-speed conduction heating with infrared sensing brings resin to 25–45 °C, an ultrasonic sensor manages the tank level, a load cell measures what’s left in each cartridge, and a Z-axis force sensor tunes speed to each part’s geometry and material.
Large-format printing you can depend on.
A failed large print costs hours and liters of resin, so Formlabs engineered Form 4L around the same reliability systems as Form 4. (Formlabs’ independent reliability testing of Form 4L is still in progress; it has not yet published a success-rate figure.)
Calibrated at the factory, validated per material
Each Form 4L receives a 60-point calibration and quality-control inspection before it ships. Formlabs optimization engineers validate print settings for every material by testing hundreds of printed parts, so a resin behaves the same on every Form 4L in a fleet — and the same as it does on Form 4.
Check a six-hour print from anywhere
The integrated 5MP camera (2592 × 1944) records print history and timelapses and streams status to Formlabs Dashboard and the Form Mobile App, with SMS and email alerts and preventative-maintenance reminders. The camera can be disabled, covered, or removed for secure facilities.
Re-engineered consumables
Formlabs re-engineered the Form 4L wear parts for years of use: a damage-resistant, user-replaceable LPU 4L, long-life resin tanks, and Resin Cartridge V2 that fills faster, wastes less, and stores in less shelf space — keeping cost per part predictable as the printer works harder.
Industry-leading materials, at large format.
Form 4L prints 20 validated Formlabs materials plus any third-party 405 nm resin in Open Material Mode. Biocompatible dental and medical resins at this size require the Form 4BL. Browse Rev1’s 3D printing resins.



Learn to print large parts in four simple steps.
PreForm, Dashboard, and the Form Mobile App are free with the printer. PreForm handles One-Click Print, auto-orientation, automatic supports with manual editing, mesh repair, and adaptive layer thickness; Dashboard manages printers, resin usage, and alerts across a fleet.
Large-format printing, step by step
Formlabs’ Form 4L workflow video follows a large job from PreForm setup through printing, Form Wash L, Form Cure L, and support removal. Rev1 walks your operators through the same process during onboarding.
Three Form 4L packages — pick the cell that fits your shop.
Each package has its own page, just as on Formlabs’ store. The Basic Package can be ordered online. Complete and Premium add large-format post-processing, bulk resin feeding, and a multi-year Pro Service Plan — Rev1 quotes those with delivery and site planning included.



The Form 4L Basic Package includes:
Form 4L vs. the Form 3L it replaces
Many large-format resin shops run a Form 3L today. Both columns are Formlabs’ published specifications; the difference is the move from dual-laser optics to the Low Force Display™ engine.
| Capability | Formlabs Form 4L | Formlabs Form 3L |
|---|---|---|
| Print engine | Low Force Display™ (MSLA) | Low Force Stereolithography (dual laser) |
| Light source | 145-LED backlight, 46 µm pixel | Two 250 mW lasers, 85 µm spot |
| Build volume | 353 × 196 × 350 mm (24.2 L) | 335 × 200 × 320 mm (21.4 L) |
| Maximum print speed | 80 mm/hr | 23 mm/hr |
| Typical print speed | 24 mm/hr average | 8 mm/hr average |
| Lacrosse-head benchmark | 4 h 54 min | 21 h 57 min |
| Resin heating | Conduction, IR sensing, 25–45 °C | Air-heated chamber, 35 °C |
| Camera | Integrated 5MP | None |
| Printer weight | 58.5 kg | 54.4 kg |
| Rated power | 900 W | 650 W |
Need biocompatible materials at this size? Ask about the Form 4BL. Prefer a smaller footprint? See the Formlabs Form 4, browse SLA printers and resin LCD printers, or explore Rev1’s industrial 3D printer lineup.
Formlabs Form 4L Technical Data
RESOURCES
Downloads & Technical Support
Everything you need to qualify, site, and run a Formlabs Form 4L.
WHY REV1 TECH
Authorized Formlabs Reseller. Large-Format Resin Specialists.
Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.