MSLA PRODUCTION CELL • FORMLABS • REV1 TECH

Formlabs Form 4 Premium Back-to-Back Production, Fully Equipped

Two Flex Build Platforms and two Form Wash V2 units, plus Form Cure V2, Finishing Tools, and a 5-year Pro Service Plan.

Formlabs Form 4 with Form Wash V2 and Form Cure V2 post-processing units

The Formlabs Form 4 Premium Package is set up for back-to-back jobs: the Form 4 printer with two Flex Build Platforms and two Form Wash V2 units, a Solvent Pump, Form Cure V2, Finishing Tools, Open Material Mode, the Form 4 Finish Kit, and a 5-year Pro Service Plan. The printer at its core is built around the Low Force Display™ engine — a 60-LED backlight and a 50 µm Light Processing Unit — and finishes most prints in under two hours. Full specifications →

200×125×210Build Volume (mm)
50 µmXY Pixel Size
100 mm/hrMax Print Speed
98.7%Print Success Rate
Print Engine
Low Force Display™405 nm60-LED Backlight16 mW/cm²
Resins
RigidToughFlame RetardantSilicone 40AOpen Material
Automation
Auto Resin Dispensing6 Control SystemsZ-Axis Force Sensing5MP Camera
Software
PreFormDashboardForm Mobile App

Authorized Formlabs reseller in the USA — Rev1 helps you choose the right package and resin set for your parts. Questions? Call (248) 707-2950.

Formlabs Form 4 with Form Wash V2 and Form Cure V2 post-processing units
Rev1 Technologies · Authorized Formlabs Partner

Factory-Built Precision. US-Supported by Rev1.

Every Form 4 passes a 60-point calibration and quality-control inspection before it leaves the Formlabs factory. Rev1 adds application review, resin selection, onboarding, and US-based support from our Auburn Hills, Michigan team.

Authorized Formlabs Reseller 60-Point Factory Calibration US Stock, Parts & Training
Formlabs — official manufacturer of the Form 4
FormlabsOfficial Manufacturer
Rev1 Technologies — authorized Formlabs reseller, Auburn Hills MI
Rev1 TechnologiesAuthorized Reseller
Why Choose the Form 4

Five promises, one printer: fast, versatile, intuitive, reliable, accurate.

Formlabs designed Form 4 for teams that cannot afford to wait overnight for a part or babysit a machine. It pairs a completely new print engine with the most mature resin ecosystem in professional 3D printing, so engineers, designers, and production teams get usable parts the same morning they finish the CAD.

Blazing Fast
Most prints finish in under two hours. Formlabs measured a typical print (80th-percentile height of 53 mm at 100 µm) and print time stays nearly the same whether you print one part or a full build platform.
Versatile Materials
23 validated Formlabs resins span rigid glass-filled, tough PP- and ABS-like, flame-retardant, 100% silicone, elastomers, 99.99% alumina ceramic, and castables — plus any 405 nm resin through Open Material Mode.
Intuitive Workflow
Import, orient, support, and print from PreForm in a few clicks. Formlabs designed the workflow so most new users learn it end to end in about 15 minutes — no slicer expertise required.
Unmatched Reliability
An independent global product-testing lab measured a 98.7% print success rate. Validated print settings, six control systems, and a 60-point factory calibration remove the usual causes of failed resin prints.
Injection-Mold Accuracy
Highly collimated light, 50 µm pixels with pre-tuned anti-aliasing, and ±0.15% XY tolerance on small features mean assemblies fit, threads engage, and surfaces need little finishing.
Room to Scale
The same LFD engine powers Form 4L, with 4.6× the build volume. Teams start on Form 4, share materials and PreForm settings across the fleet, and add large-format capacity without retraining.
Proven in Production

Who runs Form 4 — and what changed when they did.

Formlabs customer stories share one theme: the iteration loop collapses from days to hours. Outcomes below are summarized from each company’s published Formlabs case study.

Ford engineer fitting a Form 4 printed clear side-mirror housing prototype to a vehicle
Ford — Rapid Technology Center
Ford’s rapid-prototyping team uses Form 4’s throughput to turn short-notice part requests around faster and deliver more parts per week to vehicle programs.
Microsoft Surface device and accessory prototypes developed with Form 4 printed parts
Microsoft — Advanced Prototyping
Microsoft’s model makers rely on Form 4 for tight-tolerance, engineering-grade parts and run several design iterations inside a single 24-hour window.
Peak Design engineer fit-checking a Form 4 printed buckle on a backpack strap
Peak Design — Product Engineering
Peak Design went from one or two prototype turns per day to three or four, with Form 4 prints finishing in about an hour.
OXO engineer removing a dark Form 4 printed part on its build platform from the printer
OXO — Test Engineering
OXO’s test lab reports the print queue is no longer a bottleneck: Form 4 removed the time constraint that used to stack up prototype requests.
Black Diamond headlamp prototype components 3D printed on Form 4
Black Diamond — Product Design Lab
On one lighting project, Black Diamond designed and printed three part iterations in a single day — all before an afternoon design review.
Hasbro action figure prototypes 3D printed in resin on a Formlabs printer
Hasbro — Rapid Prototyping
Hasbro’s prototyping engineers value speed and reliability together, letting them commit to internal deadlines with confidence.
Low Force Display™ Print Engine

A print engine rebuilt from the light source up.

Form 4 is a masked stereolithography (MSLA) printer, but it does not behave like a typical LCD machine. Formlabs engineered six components — backlight, Light Processing Unit, release texture, flexible film tank, control systems, and resin handling — to work as one Low Force Display™ system.

Low Force Display™

Uniform, high-power light across the whole platform

The Backlight Unit projects ultra-high-power light from 60 LEDs through a plano-convex collimating lens array. Because the light arrives straight and uniform, a part printed in the corner cures exactly like a part printed in the center — the root of Form 4’s speed and its consistency from one build to the next. Formlabs’ own engineering walkthrough shows each component in motion.

Backlight60 LEDs + lens array
Wavelength405 nm
Cure-Plane Intensity16 mW/cm²
CoolingIntegrated air cooling
Light Processing Unit 4

50 µm masking with pre-tuned anti-aliasing

The Light Processing Unit 4 (LPU 4) masks the backlight into the exact shape of each layer at a 50 µm pixel size, with anti-aliasing tuned at the factory for sub-pixel edge resolution. Formlabs built the LPU 4 to be long-lasting, resistant to accidental damage, and simple to swap in the field, so the most-used optical component never becomes a reason for downtime.

50 µm pixel Sub-pixel anti-aliasing Damage-resistant User-replaceable
Release Texture

Lower peel forces, finer features, lighter supports

A proprietary micro-textured optical film sits on top of the LPU and lets air flow between the tank and the display. That dramatically reduces the suction each layer has to break as it lifts, so Form 4 can print fast without tearing delicate features or distorting thin walls. Lower forces also mean lighter, light-touch supports that snap away cleanly and leave smaller witness marks.

Micro-textured film Air-gap release Light-touch supports
Accuracy & Surface Finish

Parts that rival injection molding — and always fit.

Pair of white injection mold inserts 3D printed on the Formlabs Form 4

Most accurate assemblies

Form 4 holds ±0.15% XY tolerance on 1–30 mm features, so snap fits, press fits, and mating housings come off the platform ready to assemble. That accuracy is why teams print mold inserts like these for short-run injection molding, validating tooling geometry before cutting steel. On restorative dental models printed in Precision Model Resin, 99.7% of surfaces land within 100 µm of the CAD model.

±0.15%1–30 mm features
±0.2%31–80 mm features
±0.3%81–150 mm features
Black and white game controller shell 3D printed on Form 4 with smooth injection-mold-like surfaces

Sharpest details, smoothest surfaces

Highly collimated light and a 50 µm pixel with factory-tuned anti-aliasing render crisp edges, legible embossed text, and fine textures. Low peel forces and light-touch supports leave smooth, consistent surfaces that look and feel like production plastic — a consumer-product housing like this controller shell is ready for a design review straight out of post-processing.

Collimated light Anti-aliased edges Smooth surfaces Minimal finishing
Grey automotive assembly jig 3D printed on Form 4 for a production line
Automotive Jigs & Fixtures
Dimensionally stable fixtures that locate parts repeatably on the line, printed overnight instead of machined over weeks.
Clear microfluidic device with fine internal channels 3D printed on Form 4
Fluidic Devices
Fine internal channels and clear walls for flow visualization, sealed fittings, and lab-on-chip prototypes.
Translucent blue surgical ratchet handle 3D printed on Form 4
Medical Device Prototypes
Ergonomic handles and mechanisms with real tolerances for function testing — biocompatible production moves to Form 4B.
Print Speed

Get more done: most prints in under two hours.

Operator removing a Form 4 build platform carrying a freshly printed game controller part

Same part, a fraction of the time

Formlabs timed the same game-controller part across four machines. Form 4 finished in 1 hour 38 minutes — versus 3 h 37 min on a benchmark FDM printer, 4 h 11 min on a benchmark SLA printer, and 10 h 47 min on the previous-generation Form 3+. Peak speed reaches 100 mm per hour, and general-purpose resins average 45 mm per hour.

1 h 38 mForm 4
3 h 37 mBenchmark FDM
4 h 11 mBenchmark SLA
10 h 47 mForm 3+
Four black housing design iterations 3D printed on Form 4 laid out on a marble surface

Prototyping: three iterations before lunch

When a print takes about an hour instead of overnight, the design loop changes. Engineers print a variant, test it, revise the CAD, and print again the same day. Formlabs reports up to a 3× increase in prototyping productivity — no more queuing jobs after hours and waiting until morning to find out whether a change worked.

Up to 3× productivity Same-day iteration No overnight queue
Pile of identical black latches from a Form 4 production batch print

Production: about one minute per part

Because the whole layer cures at once, print time depends on part height rather than how many parts share the platform. Fill the full 250 cm² build area with small components and Formlabs measures throughput at roughly one minute per part — enough to run end-use latches, clips, and fixtures as a bridge to tooling or as a permanent low-volume production cell.

~1 minPer part, full platform
250 cm²Build area
5.3 LBuild volume
Form 4 build platform holding an automotive LED light bar mount print
Automotive — LED Light Bar Mount
Functional brackets for fit checks on the vehicle, printed and tested the same morning.
Form 4 build platform with clear robotic finger components printed on supports
Robotics — Gripper Fingers
Clear, accurate end-effector parts so robotics teams can revise gripper geometry between test runs.
Form 4 build platform carrying a tall engineering tower cap part on light-touch supports
Engineering — Tower Cap
Taller parts print at the same layer speed, so even full-height geometry stays within a working day.
Watch the Demo
Form 4 in Motion

See the LFD engine, the workflow, and real parts

Formlabs’ official introduction walks through the new print engine, automatic resin handling, and the parts customers are printing — from functional prototypes to end-use components — in a few minutes.

Resin Handling & Control Systems

The printer manages the resin, so you don’t have to.

Automatic Resin Handling

Snap in a cartridge, switch materials in under a minute

Resin Cartridge V2 docks in the back of the printer and dispenses resin quickly and precisely as the print needs it — no pouring, no running dry mid-job, minimal waste. Changing materials is a cartridge and tank swap that takes less than a minute, which makes it practical to run several resins through one printer in a single day. Formlabs notes Form 4 remains one of the only SLA printers on the market with automatic resin dispensing.

Filling Speed5–10× faster (V2)
Resin Waste63% less
Shelf Space30% less
Material Change< 1 minute
Flexible Film Resin Tank

A dual-layer film tank rated for 75,000+ layers

The Form 4 Resin Tank holds the liquid resin and gives each layer a surface to cure against, using a dual-layer flexible film stack that works with the release texture to keep peel forces low. Formlabs rates each tank for more than 75,000 layers with any Formlabs material — roughly 190 prints of an average 39 mm-tall model at 100 µm — and the built-in mixer keeps resin homogeneous between layers.

Dual-layer film stack 75,000+ layer lifetime Built-in mixer Per-material tanks
Intelligent Control Systems

Six sensors watching temperature, level, and force

Six upgraded onboard control systems measure and hold the conditions every material is validated against. High-speed conduction heating with infrared sensing brings resin to its target temperature; an ultrasonic sensor manages the tank level; a load cell tracks exactly how much resin remains in the cartridge; and a Z-axis force sensor adjusts print speed to the part geometry and material in real time.

Resin Heating25–45 °C, IR sensing
Tank LevelUltrasonic level sense
CartridgeLoad cell
Print ForcesZ-axis force sensor
Reliability

Stop coming back to failed prints.

An independent global leader in product testing measured Form 4 at a 98.7% print success rate across a comprehensive series of performance tests. These are the systems behind that number.

Factory Calibration & Validated Settings

Calibrated before it ships, tuned for every resin

Each printer goes through a 60-point calibration and quality-control inspection at the factory. Formlabs optimization engineers then validate print settings for every material by putting hundreds of printed parts to the test, so each resin performs to the same standard right out of the box — on every Form 4 in a fleet.

98.7%Print success rate
60-pointFactory calibration
Remote Monitoring

Watch, manage, and get alerted from anywhere

An integrated 5MP camera (2592 × 1944) records print history and timelapses and streams job status to Formlabs Dashboard and the Form Mobile App. Dashboard sends SMS and email alerts, tracks resin and tank usage, and issues preventative-maintenance reminders. For secure facilities, the camera can be disabled, covered, or removed.

5MP camera Timelapses SMS & email alerts Camera removable
Long-Lasting Consumables

Hardware engineered for years of daily use

Form 4’s wear parts were designed for longevity and quick replacement. The LPU 4 resists accidental damage and swaps without tools expertise, resin tanks last 75,000+ layers, and Resin Cartridge V2 stores in less space with less waste — so cost per part stays predictable as utilization climbs.

Durable LPU 4 Long-life tanks Predictable cost per part
Right machine for your parts?
Not sure the Form 4 fits your application?
Send us your part or application — Rev1 validates resin choice, throughput, and post-processing requirements before you commit. Free, no purchase required.
Compatible Resins

Tackle any problem with industry-leading materials.

Form 4 prints 23 validated Formlabs materials, each with factory-tuned settings, plus any third-party 405 nm photopolymer in Open Material Mode. Biocompatible dental and medical resins are reserved for the Form 4B; everything below runs on the standard Form 4. Browse Rev1’s 3D printing resins.

Fan housing printed in Formlabs Rigid 4000 Resin
RIGID
Rigid 10K & Rigid 4000
Ultra-stiff, high-strength, glass-filled resins for injection mold inserts, aerodynamic test models, and fixtures that cannot flex under load.
Glass-filled · up to 10K-class stiffness
TOUGH
Tough 1000 · 1500 · 2000
Impact-resistant ABS-like and PP-like resins for snap fits, enclosures, and threaded parts like this motor mount taking a machine screw.
3 grades · ABS- & PP-like
Parts printed in Formlabs General Purpose resins: architectural model, helmet, camera prototype, and color samples
GENERAL PURPOSE
Fast Model, Grey, Clear, White, Black
The fastest printing and best-looking parts for concept models, appearance prototypes, and everyday engineering work.
Up to 100 mm/hr (Fast Model)
FLAME RETARDANT
Flame Retardant Resin
Self-extinguishing, FST-rated parts for electronics enclosures, connectors, and interior components that must pass flammability requirements.
UL 94 V-0 certified
SILICONE
Silicone 40A Resin
True 100% silicone parts — gaskets, seals, and protective boots like this bellows — printed directly instead of cast in a mold.
100% silicone · Shore 40A
ELASTIC
Elastic 50A & Flexible 80A
Translucent elastomers for soft-touch grips, wearables, and cushioning — pick the durometer that matches your production part.
Shore 50A & 80A
CERAMIC
Alumina 4N Resin
Print, debind, and kiln-fire into a dense technical ceramic for high-temperature, wear-resistant, and electrically insulating parts.
99.99% pure alumina
CASTABLE
Clear Cast & Castable Wax
Print investment-casting patterns directly and skip the wax tooling — from industrial impellers to jewelry and art castings.
Direct-print casting patterns
Third-party photopolymer being measured out for printing in Formlabs Open Material Mode
OPEN MATERIAL
Open Material Mode
Run qualified third-party photopolymers with customizable print settings when a specialty chemistry is required.
Any 405 nm photopolymer
Software

PreForm, Dashboard, and the Form Mobile App — included, free.

PreForm prepares every job: One-Click Print, auto-orientation, automatic support generation with advanced manual editing, auto mesh repair, adaptive layer thickness, and a layer slicer for inspection. It imports STL, OBJ, 3MF, and native CAD formats on Windows 10 (64-bit) and macOS 13 or later. Dashboard manages prints and printers through the cloud, tracks resin and tank usage, and supports enterprise group accounts with admin controls, while the Form Mobile App pushes job notifications to your phone.

Formlabs PreForm software on a laptop preparing a supported Form 4 print job
Print Workflow

So intuitive anyone can learn to print in 15 minutes.

The full Form 4 workflow is four steps, and the printer, PreForm, and the Form Wash and Form Cure post-processing units handle the fiddly parts automatically.

1 · Prepare
Import your model into PreForm. Smart auto-orientation, advanced support generation, and live printability checks set up the job.
2 · Print
Load a cartridge and click print. Validated settings and automatic resin dispensing take it from there.
3 · Wash & Cure
Quick-release part removal, automatic cleaning in Form Wash, and precision post-curing in Form Cure for peak material properties.
4 · Finish
Light-touch supports snap off by hand. Sand, coat, or paint as needed — or use the part as printed.
Workflow Overview

Design to finished part, start to finish

Formlabs’ workflow overview follows a real job from CAD export through PreForm setup, printing, washing, curing, and support removal. Rev1 runs the same walkthrough live during onboarding so your operators are productive on day one.

Configurations

Three packages, from printer-only to a complete production cell.

Each package has its own page, just as on Formlabs’ store — switch with the Package selector above. Complete and Premium bundle the post-processing that turns printed parts into finished parts, plus a multi-year Formlabs Pro Service Plan.

Formlabs Form 4 Resin Tank included in the Form 4 Basic Package
BASIC PACKAGE · $2,625
Form 4 Basic
Form 4 printer, Resin Tank, Mixer, Build Platform, and Finish Kit — for teams that already own wash and cure equipment or want to start lean.
SKU PKG-F4-BASIC
View the Basic Package →
Formlabs Form 4 Complete Package: Form 4 printer with Form Wash V2 and Form Cure V2
COMPLETE PACKAGE · $5,461
Form 4 Complete
Everything in Basic with a Flex Build Platform in place of the standard platform, plus Form Wash V2, Solvent Pump, Form Cure V2 (120 V), and a 3-year Pro Service Plan.
SKU PKG-F4-COMPLETE-120V
View the Complete Package →
Formlabs Finishing Tools kit included in the Form 4 Premium Package
PREMIUM PACKAGE · $8,123
Form 4 Premium
Two Flex Build Platforms and two Form Wash V2 units for back-to-back jobs, Form Cure V2, Finishing Tools, Solvent Pump, Open Material Mode, and a 5-year Pro Service Plan.
SKU PKG-F4-PREMIUM-120V
You are viewing this package
In the Box

The Form 4 Premium Package includes:

Form 4 Printer Form 4 Resin Tank Form 4 Mixer Form 4 Flex Build Platform × 2 Form 4 Finish Kit Form Wash V2 × 2 Solvent Pump Form Cure V2 (120 V) Finishing Tools Open Material Mode Form 4 Pro Service Plan — 5 Years
Competitive Analysis

Form 4 vs. HeyGears Reflex 2 Pro

Both are professional MSLA resin printers with automated resin handling, and the Reflex 2 Pro is priced above the Form 4 Basic Package. Figures are each manufacturer’s published specifications; rows where one maker publishes no figure are left out rather than estimated.

CapabilityFormlabs Form 4HeyGears Reflex 2 Pro
TechnologyMSLA — Low Force Display™LCD (MSLA)
Build volume200 × 125 × 210 mm230 × 144 × 350 mm
XY pixel size50 µm, pre-tuned anti-aliasing40 µm
Layer thickness25–200 µm20–250 µm
Wavelength405 nm385+ nm
Resin deliveryAutomatic dispensing from Resin Cartridge V2Ultrasonic auto resin refill
Published print reliability98.7% (independent lab)Not published
Remote monitoringIntegrated 5MP camera + DashboardNot published
Printer weight18.3 kg29.7 kg
Rated power480 W750 W
Starting price at Rev1$2,625 (Basic Package)$2,999 (Printer Only)

Need a taller build envelope? The Reflex 2 Pro’s 350 mm Z height suits tall single parts; Form 4 wins on validated material breadth, published reliability, and automatic cartridge handling. See the HeyGears Reflex 2 Pro or browse all resin LCD printers, SLA printers, and Rev1’s industrial 3D printer lineup.

Planning a production setup?
Configure the Form 4 for your shop
Tell us your throughput, materials, and facility — Rev1 confirms the right package, resins, and post-processing before you buy.
Specifications

Formlabs Form 4 Technical Data

Technology
Masked Stereolithography (MSLA)
Print Engine
Low Force Display™ (LFD)
Light Source
Backlight Unit: 60 LEDs, plano-convex lens array, air cooled
Wavelength / Intensity
405 nm · 16 mW/cm² at the cure plane
XY Resolution
50 µm pixel, pre-tuned anti-aliasing
Build Volume (W×D×H)
20.0 × 12.5 × 21.0 cm (7.9 × 4.9 × 8.3 in) · 5.3 L
Build Area / Max Part Length
250 cm² · 27.3 cm
Layer Thickness
25–200 µm (0.001–0.008 in)
Print Speed
Up to 100 mm/hr · 45 mm/hr avg (general purpose)
XY Tolerances
±0.15% (1–30 mm) · ±0.2% (31–80 mm) · ±0.3% (81–150 mm)
Reliability
98.7% print success (independent lab)
Materials
23 Formlabs resins + Open Material Mode (405 nm)
Resin Handling
Automatic dispensing · 1× Resin Cartridge V2
Resin Heating
Conduction heating, IR sensing · 25–45 °C
Sensors
Ultrasonic level, cartridge load cell, Z-axis force, leveling, camera
Camera
5MP (2592 × 1944), removable
Printer Control
7″ touchscreen, 1280 × 800
Connectivity
Wi-Fi 2.4/5 GHz · Ethernet 1000 Mbit · USB-C 2.0
Software
PreForm, Dashboard, Form Mobile App
Power
100–240 VAC · 4.8 A · 50/60 Hz · 480 W
Dimensions / Min. Access
39.8 × 36.7 × 55.4 cm · access 40.7 × 47.8 × 84.4 cm
Weight / Environment
18.3 kg (40.4 lb) · 18–28 °C operating

RESOURCES

Downloads & Technical Support

Everything you need to qualify and run your Formlabs Form 4 with confidence.

Form 4 Ecosystem Sell Sheet
Formlabs’ Form 4 and Form 4L ecosystem overview: print engine, materials, post-processing, and specifications (PDF).
Download PDF →
Resin & Workflow Guide
PreForm setup, resin selection and technical data sheets, and wash and cure settings for the Form 4.
Rev1 Technical Support
Application review, sample prints, and post-sales engineering guidance from Rev1 Technologies.

WHY REV1 TECH

Authorized Formlabs Reseller. Resin Production Specialists.

Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.

YOUR REV1 PARTNER
AUTHORIZED FORMLABS RESELLER
01
Application Engineering
We review your parts and recommend the right Formlabs resins and package before your printer arrives.
02
Onboarding & Training
Rev1 handles setup and operator training on PreForm, Dashboard, and the print-to-post workflow.
03
Ongoing Support
Direct access to Rev1’s technical team for resin guidance, troubleshooting, and maintenance.
04
Free Sample Print
Send us your STL. We’ll print it on the Form 4 in the resin of your choice and ship it to you — or get an instant print quote.
05
In-Person Demo
Visit our Auburn Hills facility or schedule a demo at your site.
06
Consumables & Parts
Formlabs resins, resin tanks, build platforms, and replacement LPUs — sourced and supported from the USA.
Buyer FAQ

Formlabs Form 4 — questions buyers ask before ordering.

What technology makes the Form 4 so fast?
Form 4 uses Formlabs’ Low Force Display (LFD) engine: a backlight of 60 high-power LEDs with collimating lenses cures each whole layer at once, while a micro-textured release film and flexible tank keep peel forces low so layers can move quickly without damaging the part.
How fast is it in real use?
Most prints finish in under two hours, based on Formlabs’ 80th-percentile print height of 53 mm at 100 µm layers. Peak speed is 100 mm/hr, general-purpose resins average 45 mm/hr, and print time stays similar whether you print one part or a full platform.
How accurate are Form 4 parts?
Typical XY tolerances are ±0.15% for 1–30 mm features, ±0.2% for 31–80 mm, and ±0.3% for 81–150 mm. The 50 µm pixel with pre-tuned anti-aliasing delivers detail and fit that rival injection-molded parts.
Which resins can I use?
23 validated Formlabs materials — rigid, tough, general purpose, flame retardant, silicone, elastic, ceramic, and castable — plus third-party 405 nm resins in Open Material Mode. Biocompatible dental and medical resins require the Form 4B.
What is the difference between the Basic, Complete, and Premium packages?
Basic is the printer with tank, mixer, build platform, and Finish Kit. Complete adds a Flex Build Platform, Form Wash V2, Solvent Pump, Form Cure V2, and a 3-year Pro Service Plan. Premium doubles the Flex Build Platforms and Form Wash units and adds Finishing Tools, Open Material Mode, and a 5-year plan.
What post-processing does Form 4 need?
Parts are washed in IPA or Formlabs Resin Washing Solution to remove uncured resin, then UV post-cured to reach full mechanical properties. Form Wash and Form Cure automate both steps and are included in the Complete and Premium packages.
How reliable is the Form 4?
An independent global product-testing lab measured a 98.7% print success rate. Six onboard control systems, validated print settings for every Formlabs resin, and a 60-point factory calibration are the reasons why.
What software does it use, and does it cost extra?
PreForm handles orientation, supports, and slicing; Dashboard manages printers, alerts, and resin usage in the cloud; the Form Mobile App sends job notifications. All three are free with the printer and run on Windows 10 (64-bit) or macOS 13 and later.
What if I need a bigger build volume?
Form 4L uses the same LFD technology with a build volume 4.6× larger and completes full-volume prints in under six hours. It shares materials and PreForm workflows with Form 4, so a mixed fleet runs on one set of skills.

READY TO PUT IT TO WORK

Put the Formlabs Form 4 to work in your shop

Add the Form 4 Premium Package to your cart to order now — or talk to a Rev1 specialist and we’ll validate your application and confirm the right configuration within one business day.

Reply within 1 business day We validate fit — not just take orders Authorized Formlabs reseller in the USA US stock, parts & support

Auburn Hills, Michigan's premier source for industrial 3D printers, 3D scanners, materials, and software. Serving engineers and manufacturers across North America.

Products
Company
Contact
Payment methods
AMEXApple PayGoogle PayPayPalShop PayUnionPayVISA
Pay over time

© 2026 Rev1 Technologies. All rights reserved.