Formlabs Form 4 Complete Print, Wash & Cure in One Order
Form 4 with Form Wash V2, Form Cure V2, a Solvent Pump, and a 3-year Pro Service Plan.
The Formlabs Form 4 Complete Package is the full desktop SLA workflow in one order: the Form 4 printer with a Flex Build Platform, Form Wash V2 and a Solvent Pump for automated part washing, Form Cure V2 for post-curing, the Form 4 Finish Kit, and a 3-year Pro Service Plan. The printer at its core is built around the Low Force Display™ engine — a 60-LED backlight and a 50 µm Light Processing Unit — and finishes most prints in under two hours. Full specifications →
Authorized Formlabs reseller in the USA — Rev1 helps you choose the right package and resin set for your parts. Questions? Call (248) 707-2950.

Factory-Built Precision. US-Supported by Rev1.
Every Form 4 passes a 60-point calibration and quality-control inspection before it leaves the Formlabs factory. Rev1 adds application review, resin selection, onboarding, and US-based support from our Auburn Hills, Michigan team.

Five promises, one printer: fast, versatile, intuitive, reliable, accurate.
Formlabs designed Form 4 for teams that cannot afford to wait overnight for a part or babysit a machine. It pairs a completely new print engine with the most mature resin ecosystem in professional 3D printing, so engineers, designers, and production teams get usable parts the same morning they finish the CAD.
Who runs Form 4 — and what changed when they did.
Formlabs customer stories share one theme: the iteration loop collapses from days to hours. Outcomes below are summarized from each company’s published Formlabs case study.






A print engine rebuilt from the light source up.
Form 4 is a masked stereolithography (MSLA) printer, but it does not behave like a typical LCD machine. Formlabs engineered six components — backlight, Light Processing Unit, release texture, flexible film tank, control systems, and resin handling — to work as one Low Force Display™ system.
Uniform, high-power light across the whole platform
The Backlight Unit projects ultra-high-power light from 60 LEDs through a plano-convex collimating lens array. Because the light arrives straight and uniform, a part printed in the corner cures exactly like a part printed in the center — the root of Form 4’s speed and its consistency from one build to the next. Formlabs’ own engineering walkthrough shows each component in motion.
50 µm masking with pre-tuned anti-aliasing
The Light Processing Unit 4 (LPU 4) masks the backlight into the exact shape of each layer at a 50 µm pixel size, with anti-aliasing tuned at the factory for sub-pixel edge resolution. Formlabs built the LPU 4 to be long-lasting, resistant to accidental damage, and simple to swap in the field, so the most-used optical component never becomes a reason for downtime.
Lower peel forces, finer features, lighter supports
A proprietary micro-textured optical film sits on top of the LPU and lets air flow between the tank and the display. That dramatically reduces the suction each layer has to break as it lifts, so Form 4 can print fast without tearing delicate features or distorting thin walls. Lower forces also mean lighter, light-touch supports that snap away cleanly and leave smaller witness marks.
Parts that rival injection molding — and always fit.
Most accurate assemblies
Form 4 holds ±0.15% XY tolerance on 1–30 mm features, so snap fits, press fits, and mating housings come off the platform ready to assemble. That accuracy is why teams print mold inserts like these for short-run injection molding, validating tooling geometry before cutting steel. On restorative dental models printed in Precision Model Resin, 99.7% of surfaces land within 100 µm of the CAD model.
Sharpest details, smoothest surfaces
Highly collimated light and a 50 µm pixel with factory-tuned anti-aliasing render crisp edges, legible embossed text, and fine textures. Low peel forces and light-touch supports leave smooth, consistent surfaces that look and feel like production plastic — a consumer-product housing like this controller shell is ready for a design review straight out of post-processing.



Get more done: most prints in under two hours.
Same part, a fraction of the time
Formlabs timed the same game-controller part across four machines. Form 4 finished in 1 hour 38 minutes — versus 3 h 37 min on a benchmark FDM printer, 4 h 11 min on a benchmark SLA printer, and 10 h 47 min on the previous-generation Form 3+. Peak speed reaches 100 mm per hour, and general-purpose resins average 45 mm per hour.
Prototyping: three iterations before lunch
When a print takes about an hour instead of overnight, the design loop changes. Engineers print a variant, test it, revise the CAD, and print again the same day. Formlabs reports up to a 3× increase in prototyping productivity — no more queuing jobs after hours and waiting until morning to find out whether a change worked.
Production: about one minute per part
Because the whole layer cures at once, print time depends on part height rather than how many parts share the platform. Fill the full 250 cm² build area with small components and Formlabs measures throughput at roughly one minute per part — enough to run end-use latches, clips, and fixtures as a bridge to tooling or as a permanent low-volume production cell.



See the LFD engine, the workflow, and real parts
Formlabs’ official introduction walks through the new print engine, automatic resin handling, and the parts customers are printing — from functional prototypes to end-use components — in a few minutes.
The printer manages the resin, so you don’t have to.
Snap in a cartridge, switch materials in under a minute
Resin Cartridge V2 docks in the back of the printer and dispenses resin quickly and precisely as the print needs it — no pouring, no running dry mid-job, minimal waste. Changing materials is a cartridge and tank swap that takes less than a minute, which makes it practical to run several resins through one printer in a single day. Formlabs notes Form 4 remains one of the only SLA printers on the market with automatic resin dispensing.
A dual-layer film tank rated for 75,000+ layers
The Form 4 Resin Tank holds the liquid resin and gives each layer a surface to cure against, using a dual-layer flexible film stack that works with the release texture to keep peel forces low. Formlabs rates each tank for more than 75,000 layers with any Formlabs material — roughly 190 prints of an average 39 mm-tall model at 100 µm — and the built-in mixer keeps resin homogeneous between layers.
Six sensors watching temperature, level, and force
Six upgraded onboard control systems measure and hold the conditions every material is validated against. High-speed conduction heating with infrared sensing brings resin to its target temperature; an ultrasonic sensor manages the tank level; a load cell tracks exactly how much resin remains in the cartridge; and a Z-axis force sensor adjusts print speed to the part geometry and material in real time.
Stop coming back to failed prints.
An independent global leader in product testing measured Form 4 at a 98.7% print success rate across a comprehensive series of performance tests. These are the systems behind that number.
Calibrated before it ships, tuned for every resin
Each printer goes through a 60-point calibration and quality-control inspection at the factory. Formlabs optimization engineers then validate print settings for every material by putting hundreds of printed parts to the test, so each resin performs to the same standard right out of the box — on every Form 4 in a fleet.
Watch, manage, and get alerted from anywhere
An integrated 5MP camera (2592 × 1944) records print history and timelapses and streams job status to Formlabs Dashboard and the Form Mobile App. Dashboard sends SMS and email alerts, tracks resin and tank usage, and issues preventative-maintenance reminders. For secure facilities, the camera can be disabled, covered, or removed.
Hardware engineered for years of daily use
Form 4’s wear parts were designed for longevity and quick replacement. The LPU 4 resists accidental damage and swaps without tools expertise, resin tanks last 75,000+ layers, and Resin Cartridge V2 stores in less space with less waste — so cost per part stays predictable as utilization climbs.
Tackle any problem with industry-leading materials.
Form 4 prints 23 validated Formlabs materials, each with factory-tuned settings, plus any third-party 405 nm photopolymer in Open Material Mode. Biocompatible dental and medical resins are reserved for the Form 4B; everything below runs on the standard Form 4. Browse Rev1’s 3D printing resins.



PreForm, Dashboard, and the Form Mobile App — included, free.
PreForm prepares every job: One-Click Print, auto-orientation, automatic support generation with advanced manual editing, auto mesh repair, adaptive layer thickness, and a layer slicer for inspection. It imports STL, OBJ, 3MF, and native CAD formats on Windows 10 (64-bit) and macOS 13 or later. Dashboard manages prints and printers through the cloud, tracks resin and tank usage, and supports enterprise group accounts with admin controls, while the Form Mobile App pushes job notifications to your phone.

So intuitive anyone can learn to print in 15 minutes.
The full Form 4 workflow is four steps, and the printer, PreForm, and the Form Wash and Form Cure post-processing units handle the fiddly parts automatically.
Design to finished part, start to finish
Formlabs’ workflow overview follows a real job from CAD export through PreForm setup, printing, washing, curing, and support removal. Rev1 runs the same walkthrough live during onboarding so your operators are productive on day one.
Three packages, from printer-only to a complete production cell.
Each package has its own page, just as on Formlabs’ store — switch with the Package selector above. Complete and Premium bundle the post-processing that turns printed parts into finished parts, plus a multi-year Formlabs Pro Service Plan.



The Form 4 Complete Package includes:
Form 4 vs. HeyGears Reflex 2 Pro
Both are professional MSLA resin printers with automated resin handling, and the Reflex 2 Pro is priced above the Form 4 Basic Package. Figures are each manufacturer’s published specifications; rows where one maker publishes no figure are left out rather than estimated.
| Capability | Formlabs Form 4 | HeyGears Reflex 2 Pro |
|---|---|---|
| Technology | MSLA — Low Force Display™ | LCD (MSLA) |
| Build volume | 200 × 125 × 210 mm | 230 × 144 × 350 mm |
| XY pixel size | 50 µm, pre-tuned anti-aliasing | 40 µm |
| Layer thickness | 25–200 µm | 20–250 µm |
| Wavelength | 405 nm | 385+ nm |
| Resin delivery | Automatic dispensing from Resin Cartridge V2 | Ultrasonic auto resin refill |
| Published print reliability | 98.7% (independent lab) | Not published |
| Remote monitoring | Integrated 5MP camera + Dashboard | Not published |
| Printer weight | 18.3 kg | 29.7 kg |
| Rated power | 480 W | 750 W |
| Starting price at Rev1 | $2,625 (Basic Package) | $2,999 (Printer Only) |
Need a taller build envelope? The Reflex 2 Pro’s 350 mm Z height suits tall single parts; Form 4 wins on validated material breadth, published reliability, and automatic cartridge handling. See the HeyGears Reflex 2 Pro or browse all resin LCD printers, SLA printers, and Rev1’s industrial 3D printer lineup.
Formlabs Form 4 Technical Data
RESOURCES
Downloads & Technical Support
Everything you need to qualify and run your Formlabs Form 4 with confidence.
WHY REV1 TECH
Authorized Formlabs Reseller. Resin Production Specialists.
Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.