Your cart is empty
You may check out all the available products and buy some in the shop
Return to shop
Leaders in 3D scanning and printing. Proudly featuring CreatBot, Shining 3D, Einscan, Artec 3D, and HeyGears Resin Printers
Sale!
PLA Matte Refill Bundle 10 Rolls
SKU P-A01-B3-1.75-10000-SPLFREE
Category:
Original price was: $199.90.$124.90Current price is: $124.90.38% OFF
Extra $30 off code: WINTER
Extra $30 off code: WINTER
Product Details
Product Details Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Product Details
Product Details Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Share:
Product Detail
Accessory Compatibility
| Recommended | Not Recommended | |
| Build Plate | Cool Plate SuperTack, Smooth PEI Plate, Textured PEI Plate | / |
| Hotend | All Size / Material | / |
| Glue | Bambu Liquid Glue Glue Stick |
/ |
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.
| Recommended Printing Settings | |
| Drying Settings(Blast Drying Oven) | 50 C8 h |
| Printing and Keeping Container’s Humidity | < 20% RH (Sealed, with Desiccant) |
| Nozzle Temperature | 190 – 230 C |
| Bed Temperature (with Glue) | 35 – 45 C |
| Printing Speed | < 300 mm/s |
| Physical Properties | |
| Density | 1.31 g/cm |
| Vicat Softening Temperature | 63 C |
| Heat Deflection Temperature | 58 C |
| Melting Temperature | 163 C |
| Melt Index | 39.4 3.2 g/10 min |
| Mechanical Properties | |
| Tensile Strength | 30 5 MPa |
| Breaking Elongation Rate | 14.8 4.2 % |
| Bending Modulus | 2360 250 MPa |
| Bending Strength | 53 6 MPa |
| Impact Strength | 19.2 3.7 kJ/m |
Downloads
Printing Tips
Drying conditions: 50 for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI.
What’s in the Box:
Filament *10
Package*5
Print Your Own Spool Now
Bambu Lab 3D printer comes with a spool model. Print Spool Part 1&2 from the build-in files!
2.If you don’t have the spool model in your printer,
please click here to download.
Instructions for Printed Spool
When you’re finished printing, you will have a wide piece (1x), narrow piece (1x), spacing shim (2x).
Find the locator (a tiny block on the wide piece). Align it with the notch on the inner ring of the filament roll. Insert the wide piece into the filament roll.
Step 1. Insert the narrow piece and align the groove of each piece inside of the spool until it is pushed firmly into the wide piece.
Step 2. Once it is pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.
Step 1. Make sure the spacing shim is installed inside the spool (under the triangle).
Step 2. Tear apart and pull out the plastic strips.
Learn more about swapping the new filament with Bambu Reusable Spool on Wiki, Click Here.
You may also like
1.
2.
Free Shipping
3.
14-day Return Policy
4.
Secure Payment
