Material
High Heat + Tough PLA (Polylactic Acid)
Physical Properties
| Property | Test Method | Units | Value |
|---|---|---|---|
| Density | D792 | g/cc | 1.22 |
Mechanical Properties
| Property | Test Method | Units | Value |
|---|---|---|---|
| Izod Impact | ASTM D256* | J/m | 289 |
| Flexural Strength | ASTM D790* | MPa | 71.8 |
| Flexural Modulus | ASTM D790* | MPa | 2518 |
| Tensile Strain @ Break % | ASTM D638* | % | 6.79 |
| Tensile Stress @ Break | ASTM D638* | MPa | 37 |
| Tensile Stress @ Yield | ASTM D638* | MPa | 43.7 |
| Tensile Strain @ Yield % | ASTM D638* | % | 1.97 |
Thermal Properties
| Property | Test Method | Units | Value |
|---|---|---|---|
| Heat Deflection Temp | ASTM D648* | °C | 95.3 |
Rev1 Technologies
*Testing specimens 3D printed with a 0.4mm nozzle, 0.2mm layer height, and 100% infill. The specimens were printed flat (XY) on the build plate at the temperatures according to each material's print settings. This data should not be used to establish specifications limits or used alone as the basis of design. Any use of the data is accepted at the recipient's sole risk.