Product Identification
| Product Name | PolyMax-PLA |
|---|---|
| Product Use | 3D Printing Filament |
| Manufacturer/Supplier | JF Polymers (Suzhou) Co., Ltd. |
| Address | 2901 Auburn Rd, Auburn Hills, MI 48326 |
| Contact Email | [email protected] |
| Telephone | +248-707-2950 |
| Emergency Telephone Number | +248-707-2950 |
Product Description
PolyMax™ PLA is an incredibly easy-to-print filament with improved mechanical properties, making it an excellent alternative to ABS.
Technical Specifications
| Property | Standard | Value |
|---|---|---|
| Density | ISO1183, GB/T1033 | 1.17-1.24 g/cm³ at 23°C |
| Melt index | 210°C, 2.16kg | 5-8 g/10min |
| Equilibrium water absorption | 0.51% | |
| Glass transition temperature | DSC, 10°C/min | 61 °C |
| Melting temperature | DSC, 10°C/min | 148.7 °C |
| Crystallization temperature | DSC, 10°C/min | 111.7 °C |
| Vicat softening temperature | ISO 306, GB/T 1633 | 62.4 °C |
| Heat deflection temperature | ISO 75 1.8MPa | 52.3 °C |
| Heat deflection temperature | ISO 75 0.45MPa | 54.5 °C |
Mechanical Properties
| Property | Standard | Value |
|---|---|---|
| Young’s modulus (X-Y) | ISO 527, GB/T 1040 | 1879 ± 109 MPa |
| Young’s modulus (Z) | 1405 ± 141 MPa | |
| Tensile strength (X-Y) | ISO 527, GB/T 1040 | 28.1 ± 1.3 MPa |
| Tensile strength (Z) | 20.2 ± 0.3 MPa | |
| Elongation at break (X-Y) | ISO 527, GB/T 1040 | 1.90 ± 0.21 % |
| Elongation at break (Z) | 1.36 ± 0.3 % | |
| Bending modulus (X-Y) | ISO 178, GB/T 9341 | 2119 ± 60 MPa |
| Bending strength (X-Y) | ISO 178, GB/T 9341 | 48 ± 1.9 MPa |
| Charpy impact strength (X-Y) | ISO 179, GB/T 1043 | 12.1 ± 1.0kJ/m² |
Printing Parameters
- Nozzle temperature: 190 – 230 ℃
- Build surface material: BuildTak®, Glass, Blue Tape
- Build surface treatment: Glue, Magigoo
- Build plate temperature: 25 - 60 ˚C
- Cooling fan: ON
- Printing speed: 40-60 mm/s
- Raft separation distance: 0.2 mm
- Retraction distance: 1 mm
- Retraction speed: 20 mm/s
- Environmental temperature: Room temperature
- Threshold overhang angle: 60 ˚
- Recommended support material: PolySupport™ and PolyDissolve™ S1
Additional Information
The typical values presented in this data sheet are intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes. Actual values may vary significantly with printing conditions. End-use performance of printed parts depends not only on materials but also on part design, environmental conditions, printing conditions, etc. Product specifications are subject to change without notice.
Each user is responsible for determining the safety, lawfulness, technical suitability, and disposal/recycling practices of materials for the intended application. Rev1Tech makes no warranty of any kind, unless announced separately, to the fitness for any use or application. Rev1Tech shall not be made liable for any damage, injury, or loss induced from the use of materials in any application.
Click here to shop PolyMax-PLA .