Knowledge Base›Materials›PolyMax™ PLA Safety Data Sheet
🧪 Materials

PolyMax™ PLA Safety Data Sheet

PolyMax™ PLA Safety Data Sheet

According to Hazard Communication Standard (29 CFR 1910.1200)

Version 1.0 | Issue date: 07/29/2019 | Revision date: 07/29/2019 | SDS record number: CSSS-TCO-010-132036

1. Product and Company Identification

Product Name PolyMax™ PLA
Product Use 3D Printing Filament
Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd.
Address 2901 Auburn Rd, Auburn Hills, MI 48326
Contact Email [email protected]
Telephone +248-707-2950
Emergency Telephone Number +248-707-2950

2. Hazards Identification

  • GHS Classification
    • Physical hazards: Not classified
    • Health hazards: Not classified
    • Environmental hazards: Not classified
  • GHS Label Elements
    • Hazard Pictograms: No hazard pictogram is used.
    • Signal word: No signal word is used.
    • Hazard statement: Not applicable.
  • Precautionary Statement
    • Prevention: Not applicable.
    • Response: Not applicable.
    • Storage: Not applicable.
    • Disposal: Not applicable.
  • Other hazards: Not available.

3. Composition / Information on Ingredients

This product does not contain hazardous ingredients above cut-off value according to HCS2012.

4. First Aid Measures

  • Eye contact: None expected to require first aid measures. Flush with running water for at least 15 minutes. If irritation persists, get medical attention.
  • Skin contact: None expected to require first aid measures. Wash thoroughly with soap and water. Get medical attention in the unlikely event that irritation persists.
  • Inhalation: None expected to require first aid measures. If breathed in, remove victim to fresh air and keep at rest in a position comfortable for breathing. If you feel unwell, seek medical attention.
  • Ingestion: Immediate first aid is not likely to be required. A physician or poison control center can be contacted for advice.

5. Fire Fighting Measures

  • Flammable properties: Not available.
  • Extinguishing media:
    • Suitable extinguishing media: Water spray, alcohol-resistant foam, dry powder, or carbon dioxide.
    • Unsuitable extinguishing media: Avoid using DC water to extinguish fire, to avoid material splashes and fire spread.
  • Firefighting equipment/instructions: Wear self-contained breathing apparatus for firefighting if necessary.
  • Hazardous combustion products: Carbon oxides.

6. Accidental Release Measures

  • Personal precautions: Use personal protective equipment. Ensure adequate ventilation. Evacuate personnel to safe areas.
  • Environmental precautions: Avoid disposing into drainage/sewer system or directly into the aquatic environment.
  • Methods for cleaning up: Sweep up and shovel into suitable containers. Clean up affected area.

7. Handling and Storage

  • Handling: Ensure good ventilation/exhaustion at the workplace. Wash thoroughly after handling.
  • Storage: Store in a cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage.

8. Exposure Controls / Personal Protection

  • Occupational exposure limits: This product has no PEL, TLV, or other recommended exposure limit.
  • Biological limit values: No biological exposure limits noted for the ingredient(s).
  • Appropriate engineering controls: Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of the workday.
  • Individual protection measures, such as personal protective equipment:
    • Eye / face protection: No special protection required.
    • Skin protection: No special protection required.
    • Respiratory protection: No special protection required.
  • General hygiene considerations: Wash hands, forearms, and face thoroughly after handling chemical products, before eating, smoking, and using the lavatory, and at the end of the working period.

9. Physical & Chemical Properties

Appearance Physical state: Solid
Form Solid
Color White color
Odor Not available
pH Not available
Melting point/Freezing point 175°C
Solubility (water) Insoluble
Relative Density 1.2

10. Chemical Stability & Reactivity Information

  • Reactivity: The substance is stable under normal storage and handling conditions.
  • Chemical stability: Material is stable under normal conditions.
  • Conditions to avoid: Incompatible materials.
  • Incompatible materials: Strong oxidizing agents.
  • Hazardous decomposition products: Carbon oxides.
  • Possibility of hazardous reactions: No hazardous reactions known.

11. Toxicological Information

  • Toxicokinetics, metabolism, and distribution: Not available
  • Information on toxicological effects:
    • Acute toxicity: Not available
    • Skin corrosion/Irritation: Not classified
    • Serious eye damage/irritation: Not classified
    • Respiratory or skin sensitization: Not classified
    • Germ cell mutagenicity: Not classified
    • Carcinogenicity: Not classified
    • Reproductive toxicity: Not classified
    • STOT- single exposure: Not classified
    • STOT-repeated exposure: Not classified
    • Aspiration hazard: Not classified

12. Ecological Information

  • Toxicity:
    • LC50 N/A 96h Fish OECD 203 N/A N/A
    • EC50 N/A 48h Daphnia OECD 202 N/A N/A
    • EC50 N/A 72h Algae OECD 201 N/A N/A
  • Persistence and degradability: Not available.
  • Bioaccumulative potential: Not available.
  • Mobility in soil: Not available.
  • Results of PBT & vPvB assessment: Not available.
  • Other adverse effects: Not available.

13. Disposal Considerations

  • Disposal instructions: Dispose of contents/container in accordance with local/regional/national/international regulations.
  • Contaminated packaging: Since emptied containers may retain product residue, follow label warnings even after container is emptied.

14. Transport Information

  • DOT
    • Basic shipping requirements:
      • UN number: Not regulated
      • Proper shipping name: Not regulated
      • Hazard class: Not regulated
      • Packing group: Not regulated
      • Environmental hazards: No
  • IATA
    • UN number: Not regulated
    • UN proper shipping name: Not regulated
    • Transport hazard class(es): Not regulated
    • Packing group: Not regulated
    • Environmental hazards: No
  • IMDG
    • UN number: Not regulated
    • UN proper shipping name: Not regulated
    • Transport hazard class(es): Not regulated
    • Packing group: Not regulated
    • Environmental hazards: No

15. Regulatory Information

  • US federal regulations
    • Toxic Substances Control Act (TSCA) Section 12(b) Export Notification (40 CFR 707, Subpt. D): Not regulated.
    • CERCLA Hazardous Substance List (40 CFR 302.4): Not listed.
    • SARA 304 Emergency release notification: Not regulated.
    • OSHA Specifically Regulated Substances (29 CFR 1910.1001-1053): Not regulated.
    • Superfund Amendments and Reauthorization Act of 1986 (SARA)
      • SARA 302 Extremely hazardous substance: Not listed.
      • SARA 311/312 Hazardous chemical: No
      • SARA 313 (TRI reporting): Not regulated.
  • Other federal regulations
    • Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List: Not regulated.
    • Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130): Not regulated.
    • Safe Drinking Water Act (SDWA): Not regulated.

16. Other Information

  • HMIS® ratings: Health: 0, Flammability: 1, Physical hazard: 0
  • NFPA ratings: Health: 0, Flammability: 1, Instability: 0
  • Disclaimer: The information in the sheet was written based on the best knowledge and experience currently available.
  • Issue date: 07-29-2019
  • Author: Hangzhou C&K Testing Technic Co.,Ltd
  • Website: www.rev1tech.com
  • Tel: 0571-89900715
  • Email: [email protected]
    Click here to shop PolyMax™ PLA.
Was this guide helpful?

Still having trouble?

A Rev1 technician can help. Responses within 1 business day.

Submit a ticket

Auburn Hills, Michigan's premier source for industrial 3D printers, 3D scanners, materials, and software. Serving engineers and manufacturers across North America.

Products
Company
Contact
Payment methods
AMEXApple PayGoogle PayPayPalShop PayUnionPayVISA
Pay over time

© 2026 Rev1 Technologies. All rights reserved.