PolyLite™ ASA is an alternative to ABS with improved weather resistance. Its UV resistance and excellent mechanical properties make it the perfect choice for real-life applications.
Material Properties
Density
ISO1183, GB/T1033
1.13 g/cm3 at 23°C
Melt index
220°C, 10 kg
25 g/10min
Effect of weak acids
Resistant
Effect of strong acids
Slightly resistant
Effect of weak alkalis
Resistant
Effect of strong alkalis
Slightly resistant
Effect of organic solvent
Not resistant
Effect of oils and grease
Resistant
Thermal Properties
Glass transition temperature
DSC, 10°C/min
97.8 °C
Vicat softening temperature
ISO 306, GB/T 1633
105.3 °C
Heat deflection temperature (1.8MPa)
ISO 75
100.2 °C
Heat deflection temperature (0.45MPa)
ISO 75
102.6 °C
Mechanical Properties
Young’s modulus (X-Y)
ISO 527, GB/T 1040
2379 ± 157 MPa
Young’s modulus (Z)
1965 ± 136 MPa
Tensile strength (X-Y)
ISO 527, GB/T 1040
43.8 ± 0.8 MPa
Tensile strength (Z)
32 ± 1.8 MPa
Elongation at break (X-Y)
ISO 527, GB/T 1040
6.7 ± 0.6 %
Elongation at break (Z)
1.65 ± 0.2 %
Printing Guidelines
Nozzle temperature: 240 – 260 (℃)
Build surface material: BuildTak®
Build plate temperature: 75 - 95 (˚C)
Cooling fan: OFF
Printing speed: 30-50 (mm/s)
Retraction distance: 1 (mm)
Retraction speed: 20 (mm/s)
Additional Information
The typical values presented in this data sheet are intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes. Actual values may vary significantly with printing conditions. End-use performance of printed parts depends not only on materials but also on part design, environmental conditions, printing conditions, etc. Product specifications are subject to change without notice.
Each user is responsible for determining the safety, lawfulness, technical suitability, and disposal/recycling practices of Rev1Tech materials for the intended application. Rev1Tech makes no warranty of any kind, unless announced separately, to the fitness for any use or application. Rev1Tech shall not be made liable for any damage, injury, or loss induced from the use of Rev1Tech materials in any application. Click here to shop PolyLiteASA.