According to Hazard Communication Standard (29 CFR 1910.1200)
Version 1.0 | Issue date: 07/29/2019 | Revision date: 07/29/2019
1. Identification
| Product Name |
PolyCast™ |
| Product Use |
3D Printing Filament |
| Manufacturer/Supplier |
JF Polymers (Suzhou) Co., Ltd. |
| Address |
Building 6&7&11, No.2, Hai Cheng Road, Chang Shu Economic & Technological Development Zone, 215513, People’s Republic of China |
| Contact Email |
[email protected] |
| Telephone |
+86-512-52058005 |
| Emergency Telephone Number |
+86-512-52058005 |
2. Hazard(s) Identification
| GHS Classification |
No classification |
| GHS Label Elements |
No hazard pictogram is used. |
| Signal Word |
None |
| Hazard Statement |
Not applicable. |
| Precautionary Statement |
Not applicable. |
This product does not contain hazardous ingredients above cut-off value according to HCS2012.
4. First-aid Measures
| Eye Contact |
Flush with running water for at least 15 minutes. If irritation persists, get medical attention. |
| Skin Contact |
Wash thoroughly with soap and water. Get medical attention if irritation persists. |
| Inhalation |
If breathed in, remove victim to fresh air and keep at rest in a comfortable position for breathing. Seek medical attention if unwell. |
| Ingestion |
Immediate first aid is not likely required. Contact a physician or poison control center for advice. |
5. Fire-fighting Measures
| Suitable Extinguishing Media |
Use water spray, alcohol-resistant foam, dry powder, or carbon dioxide. |
| Unsuitable Extinguishing Media |
Avoid using DC water to extinguish fire, to avoid material splashes and fire spread. |
| Hazardous Combustion Products |
Carbon oxides, nitrogen oxides. |
6. Accidental Release Measures
| Personal Precautions |
Use personal protective equipment. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. |
| Environmental Precautions |
Avoid disposing into drainage/sewer system or directly into the aquatic environment. |
| Methods for Cleaning Up |
Sweep up and shovel into suitable containers. Clean up affected area. |
7. Handling and Storage
| Handling |
Ensure good ventilation/exhaustion at the workplace. Wash thoroughly after handling. |
| Storage |
Store in a cool place. Keep container tightly closed in a dry and well-ventilated place. |
8. Exposure Controls / Personal Protection
| Occupational Exposure Limits |
No exposure limits noted for the ingredient(s). |
| Engineering Controls |
Use in a well-ventilated area. |
| Personal Protective Equipment |
- Eye/Face Protection: Chemical safety goggles.
- Skin Protection: Wear suitable protective clothing to prevent skin exposure.
- Respiratory Protection: Suitable respiratory protective device recommended.
|
9. Physical and Chemical Properties
| Appearance |
Solid |
| Color |
Translucent |
| Odor |
Odorless |
| Density |
1.08-1.10 |
| Solubility (water) |
Insoluble |
10. Stability and Reactivity
| Chemical Stability |
Stable under normal conditions. |
| Incompatible Materials |
Avoid contact with other chemicals, oxidizing agents, strong alkalis, and strong acids. |
| Hazardous Decomposition Products |
Carbon oxides, nitrogen oxides. |
| Acute Toxicity |
Not classified. |
| Skin Corrosion/Irritation |
Not classified. |
| Serious Eye Damage/Irritation |
Not classified. |
| Respiratory or Skin Sensitization |
Not classified. |
| Germ Cell Mutagenicity |
Not classified. |
| Carcinogenicity |
Not classified. |
| Reproductive Toxicity |
Not classified. |
| Toxicity |
No known significant effects or critical hazards.
|