FibreX™ PP+GF30 3D Printing Filament Technical Data Sheet
3DXTech FibreXUpdated 2024-09-05
Physical Properties
Property
Standard
Unit
Typical Value
Density
ISO 1183
g/cc
1.12
Mechanical Properties
Property
Standard
Unit
Typical Value
Tensile Strength, Break
ISO 527
MPa
65
Tensile Modulus
ISO 527
MPa
6750
Tensile Elongation, Break
ISO 527
%
1.7
Flexural Strength
ISO 178
MPa
85
Flexural Modulus
ISO 178
MPa
5320
Thermal Properties
Property
Standard
Unit
Typical Value
Deflection Temperature at 0.45 MPa (66psi)
ISO 75
°C
139
Electrical Property
Property
Standard
Unit
Typical Value
Surface Resistance
ASTM D257
Ohm/sq
>1013
Printed Specimen Conditions
Printer: Open Source FDM/FFF
Nozzle: 0.4mm
Layer Height: 0.25mm
Infill: 100%, +/- 45°
Extrusion Temp: 265°C
Bed Temp: 85°C
Specimen Orientation: XY Flat
Disclaimer: The technical data contained on this data sheet is furnished without charge or obligation and accepted at the recipient’s sole risk. This data should not be used to establish specifications limits or used alone as the basis of design. The data provided is not intended to substitute any testing that may be required to determine fitness for any specific use.