Micro Swiss Brass Plated Nozzle — RepRap M6 (3mm) RepRap M6 · 3mm filament · 360 Brass + TwinClad XT
Genuine Micro Swiss brass + TwinClad XT nozzle — a direct drop-in for RepRap M6 (3mm) hotends
A genuine Micro Swiss upgrade nozzle for 3mm-filament RepRap M6 hotends — machined from 360 brass, nickel-plated and finished with TwinClad XT, a very-low-friction coating for smoother, more repeatable extrusion and a longer service life than the stock nozzle. Eight orifice sizes from a fine 0.2 mm up to a high-flow 1.2 mm. Full specifications →
A genuine Micro Swiss brass nozzle for RepRap M6 (3mm) hotends. Pick your orifice size above, or call (248) 707-2950 about bulk pricing.
Authentic Micro Swiss nozzles, made in the USA
Every nozzle is a genuine Micro Swiss part — 360 brass, nickel-plated and TwinClad XT coated, made in the USA. Rev1 Technologies is your authorized Micro Swiss reseller and US support partner, Auburn Hills, Michigan.
Machined brass, hard low-friction coating.
A cleaner, more repeatable extrusion than stock.
Machined from 360 brass and nickel-plated for even heat transfer and corrosion resistance, then finished with TwinClad XT — a low-friction composite coating that keeps filament flowing smoothly and resists the buildup and wear that clog a bare stock nozzle.
Genuine Micro Swiss, built to last.
Machined from 360 brass and nickel-plated for even heat transfer, corrosion resistance and a smoother, more repeatable extrusion than the stock nozzle.
A hard, nickel-composite plating with one of the lowest coefficients of friction available — it resists abrasion and material buildup far better than nickel-PTFE.
A genuine Micro Swiss part, machined and plated in Micro Swiss’s own US facility — never grey-market, counterfeit brass or mystery coating.
Dial in fine detail or high flow.
One M6 nozzle family, your choice of orifice.
The same genuine brass nozzle is offered in eight precision orifice sizes — from a fine 0.2 mm for crisp detail to a high-flow 1.2 mm for fast, thick-layer prints. Pick the size that matches your print; the thread and fit stay identical.
From everyday PLA to PETG and ABS.
PLA, PETG and ABS at the quality and consistency you expect — a clean, genuine upgrade over the stock nozzle, with smoother flow and fewer clogs.
The TwinClad XT coating lets this brass nozzle handle carbon-fiber, glass-fiber, metal-filled and wood-filled filaments far longer than an uncoated nozzle.
Drop to a smaller orifice for fine detail, or step up for faster, stronger functional parts — the same brass body and coating across every size.
No modification, no adapters.
Threads straight into your 3mm M6 hotend.
Designed to the RepRap M6 (3mm) standard, it drops straight into E3D v5/v6 (3mm), Olsson Block, J-head and compatible 3mm-filament hotends — same thread, same seat, no modification needed. Genuine Micro Swiss, stocked and supported in the USA.
Brass Plated Nozzle — RepRap M6 (3mm) Specifications
WHY REV1 TECH
Authorized Micro Swiss Reseller. Additive & Maker-Supply Specialists.
Rev1 Technologies is an authorized Micro Swiss reseller headquartered in Auburn Hills, MI, with hands-on expertise in industrial FFF, resin, scanning, and the supplies that keep them running.
Brass Plated Nozzle — RepRap M6 (3mm) — Questions
Will it fit my hotend?
It is a direct replacement for the brass nozzle in 3mm-filament RepRap M6 hotends — E3D v5/v6 (3mm), Olsson Block, J-head and compatible clones. Not sure which thread or filament size you have? Call us and we’ll confirm before you buy.
What does the TwinClad XT coating do?
TwinClad XT is a very-low-friction, hard electroless-nickel composite coating. It helps filament flow more smoothly and consistently, resists buildup and wear, and gives a longer, more repeatable service life than an uncoated stock brass nozzle.
Which orifice size should I pick?
Smaller orifices (0.2–0.3 mm) give finer detail and thinner walls; larger ones (0.6–1.2 mm) print faster with thicker layers. 0.4 mm is the all-round default. Printing abrasive or filled filaments? Ask us about the A2 hardened or CM2 versions.
Is it a genuine Micro Swiss part?
Yes — every part is authentic Micro Swiss, sourced direct and stocked in Michigan. No grey-market, no counterfeit components. Rev1 Technologies is an authorized Micro Swiss reseller.
Do you offer bulk or trade pricing?
Yes — case pricing and scheduled standing orders for shops, schools and print farms, quoted within one business day. Call (248) 707-2950 or use “Get Bulk Pricing” above.
How fast do you ship?
We stock genuine Micro Swiss nozzles in Michigan and ship fast — no overseas lead times or customs surprises. Need it urgently or in volume? Call (248) 707-2950 and we’ll sort it out.