Micro Swiss All-Metal Hotend Kit for Creality CR-6 Creality CR-6 SE / CR-6 MAX / CR-10 Smart · All-Metal Conversion
Genuine Micro Swiss all-metal conversion kit — a complete, high-temp drop-in for the Creality CR-6 SE
Convert your Creality CR-6 SE, CR-6 MAX or CR-10 Smart to a true all-metal hotend. This complete Micro Swiss kit replaces the stock PTFE-lined hotend with an all-metal heat break, a plated heat block and a TwinClad XT nozzle — so you can print ABS, nylon, polycarbonate and abrasive filaments without the heat-creep clogs and liner wear of the stock setup. Printer-specific, with all the hardware and tools included. Full specifications →
A complete genuine Micro Swiss all-metal conversion for the CR-6 SE / CR-10 Smart. Questions on your exact model? Call (248) 707-2950.
Authentic Micro Swiss nozzles, made in the USA
Every kit is a genuine Micro Swiss All-Metal Hotend conversion — all-metal heat break, plated heat block and TwinClad XT nozzle, made in the USA. Rev1 Technologies is your authorized Micro Swiss reseller and US support partner, Auburn Hills, Michigan.
A complete conversion kit.
Heat break, heat block, nozzle and hardware.
A complete, printer-specific conversion — the all-metal heat break, the plated heat block with silicone sock, a TwinClad XT nozzle and all the mounting hardware and tools you need. Nothing else to source; it drops straight onto your printer.
A true all-metal upgrade, built to last.
Replaces the stock PTFE-lined throat with a true all-metal heat break — there is no liner in the hot zone to burn, deform or out-gas, so you can run higher temperatures without the heat-creep clogs a degrading PTFE tube causes.
The Micro Swiss nozzle and melt path are finished with TwinClad XT — a hard, very-low-friction nickel-composite plating that resists abrasion and buildup far better than a bare brass hotend.
A complete, printer-specific conversion kit — all-metal heat break, plated heat block, nozzle and the mounting hardware you need — machined in Micro Swiss’s own US facility to bolt straight onto your printer.
No PTFE in the hot zone.
High-temp capable, abrasive-ready.
The all-metal heat break removes the PTFE liner from the melt zone, so there is nothing to burn or deform at high temperatures — and the TwinClad XT plated nozzle resists the abrasion and buildup that wear out a stock brass hotend. Run ABS, nylon, polycarbonate and filled filaments with confidence.
From everyday PLA to high-temp ABS, nylon and PC.
With the PTFE out of the hot zone, the all-metal kit runs ABS, ASA, nylon, polycarbonate and other higher-temperature engineering filaments that cook a PTFE-lined hotend.
The TwinClad XT plated nozzle and melt path stand up to carbon-fiber, glass-fiber and metal-filled filaments far longer than a stock brass hotend.
Everything you need in one printer-specific kit, with no permanent modification — keep your stock build volume, z-height and firmware, and still print everyday PLA and PETG beautifully.
All-Metal Hotend Kit for Creality CR-6 Specifications
WHY REV1 TECH
Authorized Micro Swiss Reseller. Additive & Maker-Supply Specialists.
Rev1 Technologies is an authorized Micro Swiss reseller headquartered in Auburn Hills, MI, with hands-on expertise in industrial FFF, resin, scanning, and the supplies that keep them running.
All-Metal Hotend Kit for Creality CR-6 — Questions
Will this fit my printer?
It is a printer-specific conversion kit for the Creality CR-6 SE, CR-6 MAX and CR-10 Smart. Not sure it matches your exact model or revision? Call us and we’ll confirm before you buy.
What does an all-metal hotend get me?
Removing the PTFE liner from the hot zone lets you run higher temperatures — ABS, ASA, nylon, polycarbonate and other engineering filaments — without the liner burning, out-gassing or causing heat-creep clogs. The TwinClad XT plated nozzle also handles abrasive, filled filaments far better than stock brass.
Is everything included?
Yes — the kit ships complete with the all-metal heat break, the plated heat block (and silicone sock where applicable), a Micro Swiss nozzle and the mounting hardware and tools needed for the swap. It is a genuine Micro Swiss part, made in the USA.
Is it a genuine Micro Swiss part?
Yes — every part is authentic Micro Swiss, sourced direct and stocked in Michigan. No grey-market, no counterfeit components. Rev1 Technologies is an authorized Micro Swiss reseller.
Do you offer bulk or trade pricing?
Yes — case pricing and scheduled standing orders for shops, schools and print farms, quoted within one business day. Call (248) 707-2950 or use “Get Bulk Pricing” above.
How fast do you ship?
We stock genuine Micro Swiss nozzles in Michigan and ship fast — no overseas lead times or customs surprises. Need it urgently or in volume? Call (248) 707-2950 and we’ll sort it out.