NON-FLAMMABLE WASHING SOLUTION • FORMLABS • REV1 TECH

Formlabs Resin Washing Solution Cleans Like IPA, Lasts Twice as Long

A non-flammable part-cleaning solution that dissolves nearly twice as much resin as IPA before saturating.

Formlabs Resin Washing Solution 5 L jug

Formlabs Resin Washing Solution is a non-flammable* solution for cleaning resin off of 3D printed parts. It cleans as well as IPA but can dissolve nearly twice as much resin before becoming saturated, reducing wash replenishing and cost per washed part with a solution safe enough for any workspace. It is recommended with Form Wash and Form Wash L. *Non-flammable per GHS classification. Full specifications →

5 LPer unit
20%Saturation limit
240 daysSolution lifetime*
2×Resin capacity vs IPA
Works With
Fill Volume
Form Wash V2: 3 units (15 L)Form Wash L: 8 units (40 L)

Authorized Formlabs reseller in the USA — Rev1 can bundle consumables with your printer and post-processing. Questions? Call (248) 707-2950.

Formlabs Resin Washing Solution 5 L jug
Rev1 Technologies · Authorized Formlabs Partner

Factory-Built Precision. US-Supported by Rev1.

Resin Washing Solution is built and supported by Formlabs. Rev1 adds workflow and material guidance, onboarding, and US-based support from our Auburn Hills, Michigan team.

Authorized Formlabs Reseller Workflow & Material Guidance US Stock, Parts & Training
Formlabs — official manufacturer of Resin Washing Solution
FormlabsOfficial Manufacturer
Rev1 Technologies — authorized Formlabs reseller, Auburn Hills MI
Rev1 TechnologiesAuthorized Reseller
Why Choose Resin Washing Solution

A safer, longer-lasting wash.

Stable and Cost-Effective
Stable, low-odor chemistry that cleans parts as well as IPA at a lower cost per wash.
Validated Non-Flammable
Non-flammable per GHS classification, mitigating storage and EH&S concerns.
Longer Solution Lifetime
Twice the longevity of IPA with minimal evaporation — fewer top-offs and full changeouts.
Simplified Sourcing
Get your resins and washing solution in one place.
Features

Using Formlabs Resin Washing Solution.

Formlabs Resin Washing Solution in a print lab

Cleans as well as IPA

It dissolves nearly twice as much resin before saturating — a 20% saturation limit versus 10% for IPA — so you replenish less often.

20%Saturation limit
~0 LEvaporation loss*
Build platform of parts lowered into Formlabs Form Wash

Form Wash V2: 3 units (15 L)

Wash according to your material’s recommendation, then soak parts in water for 30–60 seconds (no agitation) within 8 hours of washing to prevent swelling.

Step 1 · WashStep 2 · Water soak
Formlabs Form Wash L V2 with lid open

Form Wash L: 8 units (40 L)

Dry with compressed air for 30–60 seconds, a fan for 30–120 minutes, or air dry for 4–6 hours — then cure according to material recommendations.

Step 3 · DryStep 4 · Cure
Resin prototype design iterations printed on Form 4

Compatible with most non-biocompatible resins

Including Clear, Grey, White, Black, Draft, Model, Grey Pro, Durable, Rigid 4000, Rigid 10K, High Temp, ESD and the Alpha resins. Not for Flexible and Elastic resins, Tough 1000 V1, Tough 1500 V2, Tough 2000 V2, or resins that need a validated workflow (biocompatible, Flame Retardant).

Most non-biocompatible resins
Works With

Recommended with Formlabs washers.

Form Wash V2, Form Wash L V1 and Form Wash L V2; also compatible with Form Studio Wash+Cure.

Formlabs Form Wash V2 part washer
Form Wash V2
Fill with 3 units (15 L). View Form Wash V2 →
Formlabs Form Wash L part washer
Form Wash L
Fill with 8 units (40 L). View Form Wash L V2 →
Formlabs Form Studio Wash+Cure in washing mode
Form Studio Wash+Cure
Also compatible. View Wash+Cure →
Compare

Washing solutions compared.

Formlabs’ published comparison. *Assuming 1 print per day. **Secondary flammable solvent factored into cost.

SolutionNon-flammable workflowCost / LSaturation limitLost to evaporation*Lifetime* (days)Cost per wash
IPANo$7.6710%1.18 L97$1.08
Formlabs Resin Washing SolutionYes$15.0020%~0 L240$0.91
Non-flammable competitorYes$28.0020%~0 L240$1.69
Competitor high-saturation solutionNo — needs a secondary flammable solvent$52.50**35%~0 L420$1.81

Browse all Formlabs post-processing or the Formlabs brand page.

Specifications

Formlabs Resin Washing Solution Technical Data

Volume
5 L per unit
Compatible Hardware
Form Wash V2, Form Wash L V1, Form Wash L V2
Fill Volume
Form Wash V2: 3 units (15 L); Form Wash L: 8 units (40 L)
Flammability
Non-flammable per GHS classification
Compatible Resins
Most non-biocompatible Formlabs resins
Not Compatible
Flexible and Elastic family, Tough 1000 V1, Tough 1500 V2, Tough 2000 V2, resins requiring a validated workflow (biocompatible, Flame Retardant, etc.)
SKU
SLN-RW-01

RESOURCES

Downloads & Technical Support

Everything you need to choose and run Formlabs Resin Washing Solution with confidence.

Resin Washing Solution Technical Data
Formlabs-published specifications, compatibility, and what is included.
View specifications →
Post-Processing Guide
Wash, cure, and finishing settings and best practices for Formlabs materials.
Rev1 Technical Support
Application review, sample prints, and post-sales engineering guidance from Rev1 Technologies.

WHY REV1 TECH

Authorized Formlabs Reseller. Resin & SLS Production Specialists.

Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.

YOUR REV1 PARTNER
AUTHORIZED FORMLABS RESELLER
01
Application Engineering
We match post-processing equipment and consumables to your printer, materials, and volumes.
02
Onboarding & Training
Rev1 handles setup and operator training on PreForm, Dashboard, and the print-to-post workflow.
03
Ongoing Support
Direct access to Rev1’s technical team for resin guidance, troubleshooting, and maintenance.
04
Free Sample Print
Send us your STL. We’ll arrange a Formlabs sample part and ship it to you — or get an instant print quote.
05
In-Person Demo
Visit our Auburn Hills facility or schedule a demo at your site.
06
Consumables & Parts
Formlabs post-processing equipment, solvents, consumables, and spare parts — sourced and supported from the USA.
Buyer FAQ

Formlabs Resin Washing Solution — questions buyers ask.

Is it really non-flammable?
Yes — it is non-flammable per GHS classification, which simplifies storage and EH&S compared with IPA.
How many jugs fill a Form Wash?
Three 5 L units (15 L) for Form Wash V2, and eight (40 L) for Form Wash L.
Does it need an extra step?
Yes: after washing, soak parts in water for 30–60 seconds within 8 hours, then dry (compressed air, fan or air dry) before curing.
Which resins can I wash with it?
Most non-biocompatible Formlabs resins. Not the Flexible and Elastic family, Tough 1000 V1, Tough 1500 V2, Tough 2000 V2, or validated-workflow resins such as biocompatible and Flame Retardant.
How does it compare with IPA on cost?
Per Formlabs (1 print per day), about $0.91 per wash versus $1.08 for IPA, with a 240-day solution lifetime versus 97 days.
Does it work in Form Studio Wash+Cure?
Yes. Form Studio Wash+Cure is compatible with IPA, TPM and Resin Washing Solution.

FINISH EVERY PART RIGHT

Switch to a non-flammable wash

Talk to a Rev1 specialist about Formlabs Resin Washing Solution for your Form Wash — we’ll check your resins first.

Reply within 1 business day We validate fit — not just take orders Authorized Formlabs reseller in the USA US support & training

Auburn Hills, Michigan's premier source for industrial 3D printers, 3D scanners, materials, and software. Serving engineers and manufacturers across North America.

Products
Company
Contact
Payment methods
AMEXApple PayGoogle PayPayPalShop PayUnionPayVISA
Pay over time

© 2026 Rev1 Technologies. All rights reserved.