AUTOMATED RESIN PART WASHER • FORMLABS • REV1 TECH

Formlabs Form Wash V2 Automated Washing for SLA Parts

Wash parts straight from the build platform, then lift them out of the solvent to dry — automatically.

Formlabs Form Wash V2 automated resin part washer

All SLA 3D printed parts need washing to remove residual resin. Formlabs Form Wash V2 agitates IPA or an alternative solvent around your parts with a magnetically coupled impeller for the right time, then raises them out of the solvent so they air dry instead of over-soaking. It takes parts on the build platform or in the wash basket, for Form 4, Form 4B, Form Studio 1 and Form 3 series printers. Full specifications →

10 minDefault IPA wash
7–15 LSolvent volume
120Prints per IPA refill
3×More agitation
Works With

Authorized Formlabs reseller in the USA — Rev1 helps you set up wash and cure for your resins. Questions? Call (248) 707-2950.

Formlabs Form Wash V2 automated resin part washer
Rev1 Technologies · Authorized Formlabs Partner

Factory-Built Precision. US-Supported by Rev1.

Form Wash V2 is built and supported by Formlabs. Rev1 adds workflow and material guidance, onboarding, and US-based support from our Auburn Hills, Michigan team.

Authorized Formlabs Reseller Workflow & Material Guidance US Stock, Parts & Training
Formlabs — official manufacturer of Form Wash V2
FormlabsOfficial Manufacturer
Rev1 Technologies — authorized Formlabs reseller, Auburn Hills MI
Rev1 TechnologiesAuthorized Reseller
Why Choose Form Wash V2

Hands-off cleaning for every resin part.

Adaptable to Build Platforms
Adjustable platform mounts, configurable at different heights and widths, let you switch between build platforms.
Improved Agitation
3× more agitation than the previous generation cleans every nook for the right time, automatically.
Flexible Solvent Volume
Use 7–15 L of solvent: less for smaller parts and builds, for better resource efficiency.
120 Prints per Refill
Wash about 120 prints per IPA refill with regular use — 67% more parts before replacing solvent than the previous generation.
Features

From the printer to clean, dry parts.

Build platform with resin parts lowered into Formlabs Form Wash

Wash straight from the build platform

Move the build platform from the printer to Form Wash, or remove parts and use the wash basket. When the cycle ends, Form Wash raises parts out of the solvent so they air dry instead of soaking and warping.

Platform or basketAuto-lift to dry
Formlabs Resin Washing Solution 5 L jug

IPA, TPM, or Resin Washing Solution

Formlabs recommends IPA for the best cleaning performance; TPM and Formlabs Resin Washing Solution, a non-flammable option, are also compatible.

IPATPMResin Washing Solution
Formlabs Solvent Pump for Form Wash

Fill and empty without spills

The battery-powered Solvent Pump (sold separately) fills and empties the Form Wash bucket quickly and reduces the risk of chemical spills.

Battery poweredSold separately
Formlabs Form Wash V2 and Form Cure V2 side by side

Pair with Form Cure V2

Washing is half of resin post-processing. Form Cure V2 completes the cure with heat and 405 nm light; both come in the Form 4 Complete Package.

Form Cure V2Form 4 Complete
Workflow

Wash and cure in the Form 4 workflow

Parts move from Form 4 to Form Wash to Form Cure with validated settings for each Formlabs resin.

Watch the Video

Form 4 workflow in minutes

Formlabs’ video covers the basics of Form 4, from software and materials to printing and post-processing with Form Wash and Form Cure.

Setting up resin post-processing?
Match wash and cure to your resins
Rev1 recommends solvents, wash times and cure settings for the Formlabs materials you run.
Works With

Compatible with Formlabs desktop SLA printers.

Form 4, Form 4B, Form Studio 1, Form 3/+, Form 3B/+ and Form 2.

Formlabs Form 4 resin 3D printer
Form 4
The fast desktop resin workhorse. View Form 4 →
Formlabs Form 4B medical resin 3D printer
Form 4B
Biocompatible dental and medical parts. View Form 4B →
Formlabs Form Studio 1 resin 3D printer
Form Studio 1
Professional resin for anyone. View Form Studio 1 →
In the Box

Form Wash V2 ships with:

Wash BucketWash BasketHydrometer2× Platform Mounts
Compare

Formlabs washers compared.

Figures from Formlabs’ published tech specs.

SpecForm Wash V2Form Wash L V2Form Studio Wash+Cure
Dimensions31.5 × 29.3 × 40.5 cm78.0 × 46.0 × 67.0 cm33 × 30 × 44 cm
Bucket volume14.4 L43.0 L10 L
Max part size20 × 14.5 × 19.5 cm35.3 × 20 × 29.6 cm20.0 × 12.5 × 24.5 cm
Build platformsOne Form 4 / Form 3One Form 4L or two Form 4One Form Studio 1 / Form 4
Also curesNo (pair with Form Cure V2)No (pair with Form Cure L V2)Yes, 405 nm curing
Price$699$4,500$199

Browse all Formlabs post-processing or the Formlabs brand page.

Specifications

Formlabs Form Wash V2 Technical Data

Printer Compatibility
Form 4, Form 4B, Form Studio 1, Form 3/+, Form 3B/+, Form 2
Dimensions
31.5 × 29.3 × 40.5 cm (12.4 × 11.5 × 15.9 in); 71.4 cm (28.1 in) tall when open
Weight
8.6 kg (18.9 lb) without solvent
Bucket Volume
14.4 L (3.8 US gal)
Maximum Part Size
20 × 14.5 × 19.5 cm (7.9 × 5.7 × 7.6 in)
Agitation
Magnetically coupled impeller
Compatible Solvents
IPA, TPM, Formlabs Resin Washing Solution
Default Wash
10 minutes in fresh IPA
Operating Environment
18–28 °C (64–82 °F) suggested
Power
90–240 V, 2.0 A, 50/60 Hz, 50 W
SKU
FH-WA-03

RESOURCES

Downloads & Technical Support

Everything you need to choose and run Formlabs Form Wash V2 with confidence.

Form Wash V2 Technical Data
Formlabs-published specifications, compatibility, and what is included.
View specifications →
Post-Processing Guide
Wash, cure, and finishing settings and best practices for Formlabs materials.
Rev1 Technical Support
Application review, sample prints, and post-sales engineering guidance from Rev1 Technologies.

WHY REV1 TECH

Authorized Formlabs Reseller. Resin & SLS Production Specialists.

Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.

YOUR REV1 PARTNER
AUTHORIZED FORMLABS RESELLER
01
Application Engineering
We match post-processing equipment and consumables to your printer, materials, and volumes.
02
Onboarding & Training
Rev1 handles setup and operator training on PreForm, Dashboard, and the print-to-post workflow.
03
Ongoing Support
Direct access to Rev1’s technical team for resin guidance, troubleshooting, and maintenance.
04
Free Sample Print
Send us your STL. We’ll arrange a Formlabs sample part and ship it to you — or get an instant print quote.
05
In-Person Demo
Visit our Auburn Hills facility or schedule a demo at your site.
06
Consumables & Parts
Formlabs post-processing equipment, solvents, consumables, and spare parts — sourced and supported from the USA.
Buyer FAQ

Formlabs Form Wash V2 — questions buyers ask.

Does Form Wash V2 work with Form 4?
Yes. It fits Form 4 and Form 4B build platforms with its adjustable mounts, and also Form Studio 1, Form 3/+, Form 3B/+ and Form 2.
How long is a wash cycle?
The default wash is 10 minutes in fresh IPA; Formlabs publishes recommended times for each resin.
Which solvents can I use?
IPA (recommended), TPM, or Formlabs Resin Washing Solution, a non-flammable alternative.
How much solvent does it need?
Between 7 and 15 liters, depending on the size and number of parts. The bucket holds 14.4 L.
How often do I replace the IPA?
About every 120 prints with regular use, according to Formlabs. The included hydrometer helps you check saturation.
Do I still need Form Cure?
Yes. Washing removes residual resin; post-curing in Form Cure V2 is what brings parts to their published properties.

FINISH EVERY PART RIGHT

Automate resin washing with Form Wash V2

Talk to a Rev1 specialist about Form Wash V2 and Form Cure V2 — we’ll set up solvents and settings for your resins.

Reply within 1 business day We validate fit — not just take orders Authorized Formlabs reseller in the USA US support & training

Auburn Hills, Michigan's premier source for industrial 3D printers, 3D scanners, materials, and software. Serving engineers and manufacturers across North America.

Products
Company
Contact
Payment methods
AMEXApple PayGoogle PayPayPalShop PayUnionPayVISA
Pay over time

© 2026 Rev1 Technologies. All rights reserved.