ALL-IN-ONE WASH + CURE UNIT • FORMLABS • REV1 TECH

Formlabs Form Studio Wash+Cure Two Steps, One Machine

Wash and cure resin prints in one compact, affordable unit — one spot on the bench instead of two.

Formlabs Form Studio Wash+Cure in curing mode

Formlabs Form Studio Wash+Cure handles both washing and curing. In washing mode, a magnetically coupled impeller circulates IPA or another solvent to clear residual resin, then you raise the basket so parts drip and dry. In curing mode, parts rotate on a glass turntable under 405 nm light to complete the chemical reaction started during printing. Built for Form Studio 1, it also works with Form 4, Form 4B and Form 3 series parts that fit. Full specifications →

2-in-1Wash + cure
10 LWash bucket
405 nm24 LEDs
24 cmTurntable
Works With
Modes
WashCure

Authorized Formlabs reseller in the USA — Rev1 helps you set up a clean resin workflow from day one. Questions? Call (248) 707-2950.

Formlabs Form Studio Wash+Cure in curing mode
Rev1 Technologies · Authorized Formlabs Partner

Factory-Built Precision. US-Supported by Rev1.

Form Studio Wash+Cure is built and supported by Formlabs. Rev1 adds workflow and material guidance, onboarding, and US-based support from our Auburn Hills, Michigan team.

Authorized Formlabs Reseller Workflow & Material Guidance US Stock, Parts & Training
Formlabs — official manufacturer of Form Studio Wash+Cure
FormlabsOfficial Manufacturer
Rev1 Technologies — authorized Formlabs reseller, Auburn Hills MI
Rev1 TechnologiesAuthorized Reseller
Why Choose Form Studio Wash+Cure

A complete resin finish in one footprint.

Two Steps, One Machine
Wash and cure in a single unit, so a full post-processing setup takes one spot on the bench.
Agitated Wash
A magnetically coupled impeller circulates solvent to clear resin from channels, cavities and undercuts.
Dry in Place
Raise the internal basket at the end of the cycle so parts drip and dry without continuing to soak.
Runs on Your Solvent
Compatible with IPA, TPM and Formlabs Resin Washing Solution.
Features

Wash, dry, cure — in one unit.

Formlabs Form Studio 1 and Form Studio Wash+Cure on a workbench

Made for Form Studio 1

Form Studio Wash+Cure sits beside Form Studio 1 and takes parts straight from the build platform or the basket.

Form Studio 1Compact footprint
Wash

Agitated wash, then dry in place

Load parts on the build platform or in the basket. The impeller agitates solvent to remove uncured resin; raise the basket at the end to dry.

Form Studio Wash+Cure set up for washing with the wash bucket

A 10-liter wash bucket

Parts up to 20.0 × 12.5 × 24.5 cm fit in the wash, enough for a full Form Studio 1 build.

10 L bucket20 × 12.5 × 24.5 cm parts
Cure

405 nm curing on a rotating turntable

Drop the glass turntable into the chamber and start the post-cure. Parts rotate under 405 nm light so every face gets the same exposure.

Form Studio Wash+Cure rinse bucket

Swap between wash and cure

Switch modes by changing the insert: the wash bucket for cleaning, the glass turntable for curing.

Wash modeCure mode
Formlabs Form Studio 1 printer beside Form Studio Wash+Cure

Professional resin results at a low cost

Together with Form Studio 1, Form Studio Wash+Cure completes an affordable professional resin workflow.

Form Studio 1 Complete
Workflow

Print, wash, cure

A complete Form Studio 1 workflow with minimal intervention.

Watch the Video

Form Studio 1 workflow

Formlabs’ video covers Form Studio 1 and Form Studio Wash+Cure, from software and materials to printing and post-processing.

Works With

Compatible with Formlabs desktop SLA printers.

Form Studio 1, Form 4, Form 4B, Form 3/+, Form 3B/+ and Form 2.

Formlabs Form Studio 1 resin 3D printer
Form Studio 1
The printer it was built for. View Form Studio 1 →
Formlabs Form 4 resin 3D printer
Form 4
Form 4 parts that fit the chamber. View Form 4 →
Formlabs Form 3 laser SLA 3D printer
Form 3
Form 3 series parts. View Form 3 →
In the Box

Form Studio Wash+Cure ships with:

Wash BucketWash Basket
Compare

Formlabs washers compared.

Figures from Formlabs’ published tech specs.

SpecForm Wash V2Form Wash L V2Form Studio Wash+Cure
Dimensions31.5 × 29.3 × 40.5 cm78.0 × 46.0 × 67.0 cm33 × 30 × 44 cm
Bucket volume14.4 L43.0 L10 L
Max part size20 × 14.5 × 19.5 cm35.3 × 20 × 29.6 cm20.0 × 12.5 × 24.5 cm
Build platformsOne Form 4 / Form 3One Form 4L or two Form 4One Form Studio 1 / Form 4
Also curesNo (pair with Form Cure V2)No (pair with Form Cure L V2)Yes, 405 nm curing
Price$699$4,500$199

Browse all Formlabs post-processing or the Formlabs brand page.

Specifications

Formlabs Form Studio Wash+Cure Technical Data

Printer Compatibility
Form Studio 1, Form 4, Form 4B, Form 3/+, Form 3B/+, Form 2
Dimensions
33 × 30 × 44 cm (13 × 11.8 × 17.3 in)
Bucket Volume
10 L (2.64 US gal)
Maximum Wash Part Size
20.0 × 12.5 × 24.5 cm (7.87 × 4.92 × 9.65 in)
Turntable Diameter
24.0 cm (9.45 in)
Maximum Cure Part Height
22.5 cm (8.9 in)
Light Source
24 multi-directional LEDs, 405 nm
Heater
None (light-only cure)
Agitation
Magnetically coupled impeller
Compatible Solvents
IPA, TPM, Formlabs Resin Washing Solution
SKU
FHS-WACU-01

RESOURCES

Downloads & Technical Support

Everything you need to choose and run Formlabs Form Studio Wash+Cure with confidence.

Form Studio Wash+Cure Technical Data
Formlabs-published specifications, compatibility, and what is included.
View specifications →
Post-Processing Guide
Wash, cure, and finishing settings and best practices for Formlabs materials.
Rev1 Technical Support
Application review, sample prints, and post-sales engineering guidance from Rev1 Technologies.

WHY REV1 TECH

Authorized Formlabs Reseller. Resin & SLS Production Specialists.

Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.

YOUR REV1 PARTNER
AUTHORIZED FORMLABS RESELLER
01
Application Engineering
We match post-processing equipment and consumables to your printer, materials, and volumes.
02
Onboarding & Training
Rev1 handles setup and operator training on PreForm, Dashboard, and the print-to-post workflow.
03
Ongoing Support
Direct access to Rev1’s technical team for resin guidance, troubleshooting, and maintenance.
04
Free Sample Print
Send us your STL. We’ll arrange a Formlabs sample part and ship it to you — or get an instant print quote.
05
In-Person Demo
Visit our Auburn Hills facility or schedule a demo at your site.
06
Consumables & Parts
Formlabs post-processing equipment, solvents, consumables, and spare parts — sourced and supported from the USA.
Buyer FAQ

Formlabs Form Studio Wash+Cure — questions buyers ask.

Does it really wash and cure?
Yes. Form Studio Wash+Cure has a wash mode with an agitating impeller and a cure mode with 405 nm light and a rotating turntable.
Does it heat parts during curing?
No. It cures with 405 nm light only. For heated, validated cures of engineering and biocompatible resins, use Form Cure V2.
Which printers is it for?
It is designed for Form Studio 1 and also works with Form 4, Form 4B, Form 3/+, Form 3B/+ and Form 2 parts that fit.
How much solvent does it hold?
The wash bucket holds 10 L (2.64 US gal).
Which solvents can I use?
IPA, TPM and Formlabs Resin Washing Solution.
Form Studio Wash+Cure or Form Wash + Form Cure?
Wash+Cure is the compact, low-cost option for Form Studio 1. Form Wash V2 and Form Cure V2 are faster, heated and sized for full Form 4 builds.

FINISH EVERY PART RIGHT

Wash and cure in one with Form Studio Wash+Cure

Talk to a Rev1 specialist about Form Studio 1 and Form Studio Wash+Cure — a complete professional resin setup.

Reply within 1 business day We validate fit — not just take orders Authorized Formlabs reseller in the USA US support & training

Auburn Hills, Michigan's premier source for industrial 3D printers, 3D scanners, materials, and software. Serving engineers and manufacturers across North America.

Products
Company
Contact
Payment methods
AMEXApple PayGoogle PayPayPalShop PayUnionPayVISA
Pay over time

© 2026 Rev1 Technologies. All rights reserved.