RESIN POST-CURING UNIT • FORMLABS • REV1 TECH

Formlabs Form Cure V2 Cure Most Parts in 60 Seconds

Heat and 405 nm light post-cure Form 4 prints in as little as 60 seconds, with 45+ validated presets.

Formlabs Form Cure V2 post-curing unit curing resin parts

Formlabs Form Cure V2 combines convection heat and 405 nm light to deliver tough, strong prints fast and consistently: 4× more UV power, 5× faster heat-up and a 1.3× larger chamber than the previous generation. Pick a validated preset for any of 45+ Formlabs materials, or set your own time and temperature. Post-curing completes the chemical reaction started during printing, boosting strength, toughness, heat resistance and creep resistance and leaving a harder, less tacky surface. For biocompatible materials, post-curing is required to meet regulatory safety standards. Full specifications →

60 sGeneral-purpose resins
100 °CMax chamber temp
48405 nm LEDs
45+Cure presets
Works With
Cure Times
General purpose: 60 sEngineering & bio: 3–15 min
Pairs With

Authorized Formlabs reseller in the USA — Rev1 sets up cure presets for the materials you run. Questions? Call (248) 707-2950.

Formlabs Form Cure V2 post-curing unit curing resin parts
Rev1 Technologies · Authorized Formlabs Partner

Factory-Built Precision. US-Supported by Rev1.

Form Cure V2 is built and supported by Formlabs. Rev1 adds workflow and material guidance, onboarding, and US-based support from our Auburn Hills, Michigan team.

Authorized Formlabs Reseller Workflow & Material Guidance US Stock, Parts & Training
Formlabs — official manufacturer of Form Cure V2
FormlabsOfficial Manufacturer
Rev1 Technologies — authorized Formlabs reseller, Auburn Hills MI
Rev1 TechnologiesAuthorized Reseller
Why Choose Form Cure V2

Rapid, validated post-curing.

Blazing Fast Curing
5–6× faster cure cycles and 40% quicker heat-up than the previous generation.
Near-Instant Heat-Up
60 °C in 150 seconds and 80 °C in 360 seconds (230 V version), per Formlabs.
Consistent, Validated Results
Convection heating up to 100 °C and 48 multi-directional LEDs with a uniform 14.5 mW/cm² irradiance.
Fits a Full Form 4 Build
A 235 mm rotating turntable and 245 mm maximum part height fit anything from large parts to full batches.
Features

Speed up post-curing for every resin.

Formlabs Form 4 with Form Wash V2 and Form Cure V2

Designed around Form 4

Form Cure V2 fits an entire Form 4 build. Form 4, Form Wash V2 and Form Cure V2 make up the Form 4 Complete Package.

Full Form 4 buildForm 4 Complete
Speed

General-purpose resins in 60 seconds

Engineering and biocompatible resins cure in 3–15 minutes. Preheating takes 150 seconds to reach 60 °C (230 V version).

60 s3–15 min
Formlabs Form 4B with Form Wash and Form Cure

Required for biocompatible parts

For Form 4B dental and medical work, post-curing to the validated settings is part of meeting the material’s regulatory requirements.

Form 4BValidated settings
Presets

45+ pre-programmed cure profiles

Select your Formlabs material on the touchscreen and start. Advanced users can customize time and temperature.

45+ presetsCustom profiles
Formlabs Form Wash and Form Cure from the Form Studio 1 Professional Package

Also for Form Studio 1 and Form 3

Form Cure V2 works with Form 4, Form 4B, Form 4L, Form 4BL, Form Studio 1, Form 3 series and Form 2 prints that fit its chamber.

Form Studio 1Form 3 series
Capacity

Large Form 4 parts, one cycle

The 235 mm glass turntable rotates parts for even exposure, and the side-hinged door makes loading easy.

235 mm turntable245 mm max height
Formlabs Form Wash V2 part washer

Wash first with Form Wash V2

Parts should be washed and dried before curing. Form Wash V2 automates the wash and lifts parts out to dry.

Form Wash V2
Watch the Video

Introducing Form Cure V2

Formlabs’ launch video shows the second-generation Form Cure curing Form 4 parts in seconds.

Works With

Compatible with Formlabs SLA printers.

Form 4, Form 4B, Form 4L, Form 4BL, Form Studio 1, Form 3 series and Form 2 — for parts that fit the chamber.

Formlabs Form 4 resin 3D printer
Form 4
Cure a full Form 4 build. View Form 4 →
Formlabs Form 4L large-format resin 3D printer
Form 4L
For full Form 4L builds, see Form Cure L V2.
Formlabs Form Studio 1 resin 3D printer
Form Studio 1
Professional resin for anyone. View Form Studio 1 →
Compare

Formlabs curing units compared.

Figures from Formlabs’ published tech specs.

SpecForm Cure V2Form Cure L V2Form Cure L V1
Dimensions33.7 × 40.4 × 37.2 cm50.7 × 54.3 × 54.5 cm69.0 × 54.0 × 44.5 cm
Weight12.1 kg (26.7 lb)40.0 kg (88.2 lb)24 kg (53 lb)
Turntable diameter23.5 cm40.4 cm39.5 cm
Max part height24.5 cm36.5 cm32 cm
Max chamber temp100 °C100 °C80 °C
Light source48 LEDs, 405 nm96 LEDs, 405 nm45 LEDs, 375 + 405 nm
FitsFull Form 4 buildFull Form 4L buildForm 3L / Form 4L builds
Price$999$4,500$1,500

Browse all Formlabs post-processing or the Formlabs brand page.

Specifications

Formlabs Form Cure V2 Technical Data

Printer Compatibility
Form 4, Form 4B, Form 4L, Form 4BL, Form Studio 1, Form 3/+, Form 3B/+, Form 2
Dimensions
33.7 × 40.4 × 37.2 cm (13.3 × 14.0 × 15.9 in)
Weight
12.1 kg (26.7 lb)
Turntable Diameter
23.5 cm (9.25 in)
Maximum Part Height
24.5 cm (9.64 in)
Max Chamber Temperature
100 °C (212 °F)
Light Source
48 multi-directional LEDs, 405 nm
LED Power / Radiant
150 W / 50 W
Irradiance
14.5 mW/cm² uniform
Power (NA)
100–120 VAC, 50–60 Hz, 15 A
SKU
FH-CU-120V-02

RESOURCES

Downloads & Technical Support

Everything you need to choose and run Formlabs Form Cure V2 with confidence.

Form Cure V2 Technical Data
Formlabs-published specifications, compatibility, and what is included.
View specifications →
Post-Processing Guide
Wash, cure, and finishing settings and best practices for Formlabs materials.
Rev1 Technical Support
Application review, sample prints, and post-sales engineering guidance from Rev1 Technologies.

WHY REV1 TECH

Authorized Formlabs Reseller. Resin & SLS Production Specialists.

Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.

YOUR REV1 PARTNER
AUTHORIZED FORMLABS RESELLER
01
Application Engineering
We match post-processing equipment and consumables to your printer, materials, and volumes.
02
Onboarding & Training
Rev1 handles setup and operator training on PreForm, Dashboard, and the print-to-post workflow.
03
Ongoing Support
Direct access to Rev1’s technical team for resin guidance, troubleshooting, and maintenance.
04
Free Sample Print
Send us your STL. We’ll arrange a Formlabs sample part and ship it to you — or get an instant print quote.
05
In-Person Demo
Visit our Auburn Hills facility or schedule a demo at your site.
06
Consumables & Parts
Formlabs post-processing equipment, solvents, consumables, and spare parts — sourced and supported from the USA.
Buyer FAQ

Formlabs Form Cure V2 — questions buyers ask.

How fast is Form Cure V2?
General-purpose resins cure in about 60 seconds; engineering and biocompatible resins in 3–15 minutes, per Formlabs.
Does it fit a full Form 4 build?
Yes. The 235 mm turntable and 245 mm maximum part height are designed for a full Form 4 build.
Can I cure Form 4L parts?
Form 4L parts that fit the chamber, yes. For full Form 4L builds, Form Cure L V2 is the matched unit.
Why post-cure at all?
Post-curing completes the chemical reaction started during printing, boosting strength, toughness, heat resistance and creep resistance and leaving a harder, less tacky surface. For biocompatible materials, post-curing is required to meet regulatory safety standards.
Can I set my own cure settings?
Yes. Choose from 45+ validated presets or customize time and temperature.
Is this the 120 V version?
Yes. This is Form Cure V2 120V (SKU FH-CU-120V-02) for North American power.

FINISH EVERY PART RIGHT

Cure parts in seconds with Form Cure V2

Talk to a Rev1 specialist about Form Cure V2 — we’ll set up presets for your resins and pair it with Form Wash.

Reply within 1 business day We validate fit — not just take orders Authorized Formlabs reseller in the USA US support & training

Auburn Hills, Michigan's premier source for industrial 3D printers, 3D scanners, materials, and software. Serving engineers and manufacturers across North America.

Products
Company
Contact
Payment methods
AMEXApple PayGoogle PayPayPalShop PayUnionPayVISA
Pay over time

© 2026 Rev1 Technologies. All rights reserved.