LARGE-FORMAT RESIN POST-CURING • FORMLABS • REV1 TECH

Formlabs Form Cure L V2 Large Parts Cured in 60 Seconds

Post-cure full Form 4L builds with 5× more UV power, in a 26% smaller footprint that cures 19% larger parts.

Formlabs Form Cure L V2 large-format post-curing unit

Formlabs Form Cure L V2 combines convection heat and 405 nm light to post-cure large Form 4L and Form 4BL prints in as little as 60 seconds. A 404 mm rotating turntable and 365 mm maximum part height fit everything from the largest Form 4L parts to full production batches. Choose a validated preset for 45+ Formlabs materials, or customize time and temperature. Post-curing completes the chemical reaction started during printing, boosting strength, toughness, heat resistance and creep resistance and leaving a harder, less tacky surface. For biocompatible materials, post-curing is required to meet regulatory safety standards. Full specifications →

60 sGeneral-purpose resins
404 mmTurntable
96405 nm LEDs
365 mmMax part height
Works With
Cure Times
General purpose: 60 sEngineering & bio: 3–15 min
Pairs With

Authorized Formlabs reseller in the USA — Rev1 helps plan power and space for large-format curing. Questions? Call (248) 707-2950.

Formlabs Form Cure L V2 large-format post-curing unit
Rev1 Technologies · Authorized Formlabs Partner

Factory-Built Precision. US-Supported by Rev1.

Form Cure L V2 is built and supported by Formlabs. Rev1 adds workflow and material guidance, onboarding, and US-based support from our Auburn Hills, Michigan team.

Authorized Formlabs Reseller Workflow & Material Guidance US Stock, Parts & Training
Formlabs — official manufacturer of Form Cure L V2
FormlabsOfficial Manufacturer
Rev1 Technologies — authorized Formlabs reseller, Auburn Hills MI
Rev1 TechnologiesAuthorized Reseller
Why Choose Form Cure L V2

Rapid curing for large resin parts.

Blazing Fast Curing
5–6× faster cure cycles and 40% quicker heat-up than the previous generation.
Near-Instant Heat-Up
60 °C in 150 seconds and 80 °C in 360 seconds (230 V version), per Formlabs.
Consistent, Validated Results
Convection heating up to 100 °C and 96 multi-directional LEDs with a uniform 14.5 mW/cm² irradiance.
Smaller, Yet Bigger
A 26% smaller footprint than Form Cure L V1, while curing parts up to 19% larger.
Features

Post-cure large parts and full batches.

Formlabs Form 4L with Form Wash L and Form Cure L

Designed for Form 4L

Form Cure L V2 fits a full Form 4L build — parts up to 353 × 196 × 365 mm. Form 4L, Form Wash L and Form Cure L make up the Form 4L Complete Package.

353 × 196 × 365 mmForm 4L Complete
Capacity

Room for the largest Form 4L parts

The 404 mm rotating turntable turns parts for even exposure from every side.

404 mm turntable
Formlabs Form 4L Premium Package with two Form Wash L units and Form Cure L

Scale to production batches

The Form 4L Premium Package adds a second Form Wash L for higher throughput, with one Form Cure L V2 curing full batches in minutes.

Form 4L Premium
Presets

45+ pre-programmed cure profiles

Choose a Formlabs material on the touchscreen, or save custom time and temperature profiles.

45+ presetsCustom profiles
Formlabs Form Wash L V2 with lid open

Wash first with Form Wash L V2

Parts should be washed and dried before curing. Form Wash L V2 takes one Form 4L platform or two Form 4 platforms per cycle.

Form Wash L V2
Formlabs Form Cure L V1, the previous generation

The upgrade from Form Cure L V1

Compared with Form Cure L V1, V2 brings 5× more UV power, faster heat-up to 100 °C, a 26% smaller footprint, and room for 19% larger parts.

5× UV power26% smaller
Ecosystem

Part of the Form 4L ecosystem

Form 4L, Form Wash L and Form Cure L work together with validated settings for each Formlabs resin.

Watch the Video

Introducing Form Cure L V2

Formlabs’ launch video shows Form Cure L V2 curing large Form 4L parts.

Works With

Compatible with Formlabs SLA printers.

Form 4L, Form 4BL, Form 4, Form 4B, Form 3 series and Form 2.

Formlabs Form 4L large-format resin 3D printer
Form 4L
Cures a full Form 4L build. View Form 4L →
Formlabs Form 4BL large-format medical 3D printer
Form 4BL
Large biocompatible builds. View Form 4BL →
Formlabs Form 4 resin 3D printer
Form 4
Desktop builds and batches. View Form 4 →
Compare

Formlabs curing units compared.

Figures from Formlabs’ published tech specs.

SpecForm Cure V2Form Cure L V2Form Cure L V1
Dimensions33.7 × 40.4 × 37.2 cm50.7 × 54.3 × 54.5 cm69.0 × 54.0 × 44.5 cm
Weight12.1 kg (26.7 lb)40.0 kg (88.2 lb)24 kg (53 lb)
Turntable diameter23.5 cm40.4 cm39.5 cm
Max part height24.5 cm36.5 cm32 cm
Max chamber temp100 °C100 °C80 °C
Light source48 LEDs, 405 nm96 LEDs, 405 nm45 LEDs, 375 + 405 nm
FitsFull Form 4 buildFull Form 4L buildForm 3L / Form 4L builds
Price$999$4,500$1,500

Browse all Formlabs post-processing or the Formlabs brand page.

Specifications

Formlabs Form Cure L V2 Technical Data

Printer Compatibility
Form 4L, Form 4BL, Form 4, Form 4B, Form 3/+, Form 3B/+, Form 2
Dimensions
507 × 543 × 545 mm (20.0 × 21.4 × 21.5 in)
Weight
40.0 kg (88.2 lb)
Turntable Diameter
404 mm (15.9 in)
Maximum Part Height
365 mm (14.4 in)
Max Chamber Temperature
100 °C (212 °F)
Light Source
96 multi-directional LEDs, 405 nm
LED Power / Radiant
350 W / 120 W
Irradiance
14.5 mW/cm² uniform
Power (NA)
100–125 VAC, 50–60 Hz, 15 A
SKU
FHL-CU-120V-02

RESOURCES

Downloads & Technical Support

Everything you need to choose and run Formlabs Form Cure L V2 with confidence.

Form Cure L V2 Technical Data
Formlabs-published specifications, compatibility, and what is included.
View specifications →
Post-Processing Guide
Wash, cure, and finishing settings and best practices for Formlabs materials.
Rev1 Technical Support
Application review, sample prints, and post-sales engineering guidance from Rev1 Technologies.

WHY REV1 TECH

Authorized Formlabs Reseller. Resin & SLS Production Specialists.

Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.

YOUR REV1 PARTNER
AUTHORIZED FORMLABS RESELLER
01
Application Engineering
We match post-processing equipment and consumables to your printer, materials, and volumes.
02
Onboarding & Training
Rev1 handles setup and operator training on PreForm, Dashboard, and the print-to-post workflow.
03
Ongoing Support
Direct access to Rev1’s technical team for resin guidance, troubleshooting, and maintenance.
04
Free Sample Print
Send us your STL. We’ll arrange a Formlabs sample part and ship it to you — or get an instant print quote.
05
In-Person Demo
Visit our Auburn Hills facility or schedule a demo at your site.
06
Consumables & Parts
Formlabs post-processing equipment, solvents, consumables, and spare parts — sourced and supported from the USA.
Buyer FAQ

Formlabs Form Cure L V2 — questions buyers ask.

Does it fit a full Form 4L build?
Yes. Form Cure L V2 is designed for parts up to 353 × 196 × 365 mm, the largest Form 4L parts and full batches.
How fast is it?
General-purpose resins cure in about 60 seconds; engineering and biocompatible resins in 3–15 minutes, per Formlabs.
What changed from Form Cure L V1?
5× more UV power, faster heat-up to 100 °C, 45+ presets, a 26% smaller footprint, and room for 19% larger parts.
What power does it need?
In North America, 100–125 VAC, 50–60 Hz, on a 15 A circuit.
Why post-cure at all?
Post-curing completes the chemical reaction started during printing, boosting strength, toughness, heat resistance and creep resistance and leaving a harder, less tacky surface. For biocompatible materials, post-curing is required to meet regulatory safety standards.
Which washer pairs with it?
Form Wash L V2, which washes one Form 4L or two Form 4 build platforms per cycle.

FINISH EVERY PART RIGHT

Cure full Form 4L builds with Form Cure L V2

Talk to a Rev1 specialist about Form Cure L V2 — we’ll plan power, space and presets for your resins.

Reply within 1 business day We validate fit — not just take orders Authorized Formlabs reseller in the USA US support & training

Auburn Hills, Michigan's premier source for industrial 3D printers, 3D scanners, materials, and software. Serving engineers and manufacturers across North America.

Products
Company
Contact
Payment methods
AMEXApple PayGoogle PayPayPalShop PayUnionPayVISA
Pay over time

© 2026 Rev1 Technologies. All rights reserved.