LARGE-FORMAT RESIN POST-CURING • FORMLABS • REV1 TECH

Formlabs Form Cure L V1 Consistent, High-Intensity Curing

Two 500 W heaters, high-powered UV and a rotating turntable for consistent large-format post-curing.

Formlabs Form Cure L V1 large-format post-curing unit

Formlabs Form Cure L V1 uses two 500 W heaters and three high-powered UV light modules alongside a reflective inner cavity and a rotating glass turntable to deliver a consistent, high-intensity cure for large SLA parts. It reaches 80 °C in under 10 minutes and offers default time and temperature settings for each Formlabs material. Post-curing completes the chemical reaction started during printing, boosting strength, toughness, heat resistance and creep resistance and leaving a harder, less tacky surface. For biocompatible materials, post-curing is required to meet regulatory safety standards. The faster Form Cure L V2 is now available. Full specifications →

80 °CMax temperature
2 × 500 WHeaters
39.5 cmTurntable
32 cmMax part height
Works With
Form 4LForm 4BLForm 3LForm 4 / Form 3 series
Light
375 nm + 405 nm45 LEDs
Newer Model

Authorized Formlabs reseller in the USA — ask Rev1 whether Form Cure L V1 or V2 fits your parts and budget. Call (248) 707-2950.

Formlabs Form Cure L V1 large-format post-curing unit
Rev1 Technologies · Authorized Formlabs Partner

Factory-Built Precision. US-Supported by Rev1.

Form Cure L V1 is built and supported by Formlabs. Rev1 adds workflow and material guidance, onboarding, and US-based support from our Auburn Hills, Michigan team.

Authorized Formlabs Reseller Workflow & Material Guidance US Stock, Parts & Training
Formlabs — official manufacturer of Form Cure L V1
FormlabsOfficial Manufacturer
Rev1 Technologies — authorized Formlabs reseller, Auburn Hills MI
Rev1 TechnologiesAuthorized Reseller
Why Choose Form Cure L V1

Precise heat and light for large parts.

Advanced Heating
Preheat the chamber to get parts ready for optimum post-curing.
Uniform Exposure
A rotating turntable and reflective inner cavity deliver UV light to every surface.
Maximize Material Properties
Default time and temperature settings unique to each Formlabs material.
Rapid, High-Intensity Curing
Two 500 W heaters reach 80 °C in less than 10 minutes while three UV light modules cure fast.
Features

Large-format curing at a lower price.

Formlabs Form Cure L V1 with door open and a large resin part on the turntable

Room for large parts

A 39.5 cm glass turntable and 32 cm maximum part height take large Form 3L and Form 4L parts.

39.5 cm turntable32 cm max height
Exposure

Consistent universal exposure

The reflective inner cavity and rotating glass turntable ensure UV light reaches all surfaces of the part for a consistent cure.

Form Cure L touchscreen showing material presets

Optimized for Formlabs materials

Use the pre-programmed cure settings or save your own frequently used custom profiles.

Material presetsCustom profiles
Formlabs Form Wash L part washer

Pair with Form Wash L

Wash large parts first in Form Wash L — the current Form Wash L V2 takes one Form 4L or two Form 4 platforms.

Form Wash L V2
Formlabs Form 3L with Form Wash L and Form Cure L

Built for the large-format ecosystem

Form Cure L V1 was designed alongside Form 3L and Form Wash L, and remains compatible with Form 4L and Form 4BL parts.

Form 3LForm 4L
Works With

Compatible with Formlabs SLA printers.

Form 4L, Form 4BL, Form 3L, Form 3BL, Form 4, Form 4B, Form 3/+, Form 3B/+ and Form 2.

Formlabs Form 3L large-format SLA 3D printer
Form 3L
Large-format laser SLA. View Form 3L →
Formlabs Form 3BL large-format medical SLA printer
Form 3BL
Large biocompatible parts. View Form 3BL →
Formlabs Form 4L large-format resin 3D printer
Form 4L
Current large-format resin. View Form 4L →
Compare

Formlabs curing units compared.

Figures from Formlabs’ published tech specs.

SpecForm Cure V2Form Cure L V2Form Cure L V1
Dimensions33.7 × 40.4 × 37.2 cm50.7 × 54.3 × 54.5 cm69.0 × 54.0 × 44.5 cm
Weight12.1 kg (26.7 lb)40.0 kg (88.2 lb)24 kg (53 lb)
Turntable diameter23.5 cm40.4 cm39.5 cm
Max part height24.5 cm36.5 cm32 cm
Max chamber temp100 °C100 °C80 °C
Light source48 LEDs, 405 nm96 LEDs, 405 nm45 LEDs, 375 + 405 nm
FitsFull Form 4 buildFull Form 4L buildForm 3L / Form 4L builds
Price$999$4,500$1,500

Browse all Formlabs post-processing or the Formlabs brand page.

Specifications

Formlabs Form Cure L V1 Technical Data

Printer Compatibility
Form 4L, Form 4BL, Form 3L, Form 3BL, Form 4, Form 4B, Form 3/+, Form 3B/+, Form 2
Dimensions
69.0 × 54.0 × 44.5 cm (27.2 × 21.3 × 17.5 in)
Weight
24 kg (53 lb)
Turntable Diameter
39.5 cm (15.6 in)
Maximum Part Height
32 cm (12.6 in)
Max Chamber Temperature
80 °C (176 °F)
Heaters
Two 500 W
Light Source
45 multi-directional LEDs, 375 nm and 405 nm
LED Power / Radiant
70 W / 36 W
Power (NA)
100–120 VAC, 50–60 Hz, 15 A
SKU
FHL-CU-120V-01

RESOURCES

Downloads & Technical Support

Everything you need to choose and run Formlabs Form Cure L V1 with confidence.

Form Cure L V1 Technical Data
Formlabs-published specifications, compatibility, and what is included.
View specifications →
Post-Processing Guide
Wash, cure, and finishing settings and best practices for Formlabs materials.
Rev1 Technical Support
Application review, sample prints, and post-sales engineering guidance from Rev1 Technologies.

WHY REV1 TECH

Authorized Formlabs Reseller. Resin & SLS Production Specialists.

Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.

YOUR REV1 PARTNER
AUTHORIZED FORMLABS RESELLER
01
Application Engineering
We match post-processing equipment and consumables to your printer, materials, and volumes.
02
Onboarding & Training
Rev1 handles setup and operator training on PreForm, Dashboard, and the print-to-post workflow.
03
Ongoing Support
Direct access to Rev1’s technical team for resin guidance, troubleshooting, and maintenance.
04
Free Sample Print
Send us your STL. We’ll arrange a Formlabs sample part and ship it to you — or get an instant print quote.
05
In-Person Demo
Visit our Auburn Hills facility or schedule a demo at your site.
06
Consumables & Parts
Formlabs post-processing equipment, solvents, consumables, and spare parts — sourced and supported from the USA.
Buyer FAQ

Formlabs Form Cure L V1 — questions buyers ask.

Is Form Cure L V1 still sold?
Yes, Formlabs still sells Form Cure L V1 120V (SKU FHL-CU-120V-01). Form Cure L V2 is the faster current model.
V1 or V2 — which should I buy?
Form Cure L V2 cures most parts in about 60 seconds, reaches 100 °C and has a smaller footprint. V1 is the lower-cost option with slower, 80 °C curing.
How hot does it get?
Up to 80 °C. Its two 500 W heaters reach that in under 10 minutes.
How big a part fits?
The turntable is 39.5 cm in diameter, with a maximum part height of 32 cm.
Which printers is it for?
Form 4L, Form 4BL, Form 3L and Form 3BL, plus smaller Formlabs SLA printers whose parts fit the chamber.
What power does it need?
In North America, 100–120 VAC, 50–60 Hz, on a 15 A circuit.

FINISH EVERY PART RIGHT

Large-format curing with Form Cure L V1

Talk to a Rev1 specialist — we’ll help you choose between Form Cure L V1 and V2 for your parts.

Reply within 1 business day We validate fit — not just take orders Authorized Formlabs reseller in the USA US support & training

Auburn Hills, Michigan's premier source for industrial 3D printers, 3D scanners, materials, and software. Serving engineers and manufacturers across North America.

Products
Company
Contact
Payment methods
AMEXApple PayGoogle PayPayPalShop PayUnionPayVISA
Pay over time

© 2026 Rev1 Technologies. All rights reserved.