PRINTER ADD-ON • FORMLABS • REV1 TECH

Formlabs VOC Extractor Print With Peace of Mind

A compact carbon-filter extractor that reduces VOCs while you print — UL GREENGUARD Gold with Form Studio 1 and Alpha Resins.

Formlabs VOC Extractor

The Formlabs VOC Extractor is a compact add-on that reduces volatile organic compound (VOC) levels while your printer runs. Air passes through two carbon filters that last roughly 330 hours of print time and swap out in seconds, and one button gives three fan speeds. At 130 × 130 × 198 mm it plugs into the printer’s exhaust port and runs on your desk — no enclosure or dedicated ventilated room. Form Studio 1 with Alpha Resins and the VOC Extractor is the only resin 3D printing setup certified to UL GREENGUARD Gold; the extractor is also compatible with Form 4. Full specifications →

~330 hFilter life
2Carbon filters
3Fan speeds
GoldUL GREENGUARD*

Genuine Formlabs accessory from an authorized US reseller — ships from Rev1. Call (248) 707-2950.

Formlabs VOC Extractor
Rev1 Technologies · Authorized Formlabs Partner

Factory-Built Precision. US-Supported by Rev1.

VOC Extractor is built and supported by Formlabs. Rev1 adds workflow and material guidance, onboarding, and US-based support from our Auburn Hills, Michigan team.

Authorized Formlabs Reseller Workflow & Material Guidance US Stock, Parts & Training
Formlabs — official manufacturer of VOC Extractor
FormlabsOfficial Manufacturer
Rev1 Technologies — authorized Formlabs reseller, Auburn Hills MI
Rev1 TechnologiesAuthorized Reseller
Why Choose VOC Extractor

Cleaner air at your desk.

UL GREENGUARD Gold
Certified with Form Studio 1 and Alpha Resins — the only resin setup to earn it.
Active Filtration
Two carbon filters reduce VOC levels while you print.
Desk-Friendly
130 × 130 × 198 mm; plugs into the exhaust port — no enclosure needed.
Simple
One button, three fan speeds; filters swap in seconds.
Features

Applications and properties.

VOC Extractor connected to a Form Studio 1

Plugs into the exhaust port

Connects to the printer’s exhaust port and runs on your desk.

Plug-in
Form Studio 1 with VOC Extractor in a studio

No dedicated room

No enclosure or ventilated room — suited to offices, schools and homes.

Desk-friendly
Formlabs sealed-chamber TVOC test chart

Measured VOC reduction

In Formlabs’ sealed-chamber TVOC testing, Form Studio 1 with the extractor peaked at less than a fifth of a competitor printer’s VOC level.

Tested
Form Studio 1 with VOC Extractor on a studio shelf

Filters swap in seconds

Two carbon filters last roughly 330 hours of print time.

~330 h filters
Works With

Fits these printers.

Use with the matching Formlabs printer and post-processing.

Formlabs Form Studio 1 resin 3D printer
Form Studio 1
Formlabs’ compact resin printer. View Form Studio 1 →
Formlabs Form 4 resin 3D printer
Form 4
Fits Form 4. View Form 4 →
Formlabs Form Studio Wash+Cure
Form Studio Wash+Cure
Wash and cure in one unit. View Wash+Cure →
In the Box

In the box:

Add to cart in the buy box above.

VOC ExtractorGenuine Formlabs part
Compare

Formlabs workflow add-ons compared.

From Formlabs’ store.

ItemResin Pump (Form 4)Resin Pump (Form 3)Resin Pump Maintenance KitVOC ExtractorForm Auto
What it doesFeeds resin from a 5 L containerFeeds resin from a 5 L containerReplacement pump tubing + transfer tubeFilters VOCs while you printRemoves parts and starts the next print
FitsForm 4, 4B, 4L, 4BLForm 3, 3L, 3B, 3BLResin Pumping SystemForm Studio 1, Form 4Form 3/3+, Form 3B/3B+ (with Build Platform 2)
Key factPrint 5× longer between changes86% less packaging wasteReplace every 6 months or on resin change~330 h filter life; 3 fan speeds24/7 printing without an operator
Price$349$199$39$179$299

Browse all Formlabs accessories or the Formlabs brand page.

Specifications

Formlabs VOC Extractor Technical Data

Compatible Printers
Form Studio 1, Form 4
Accessory Type
VOC extractor
Dimensions
130 × 130 × 198 mm
Formlabs SKU
FH-VOC-01
Filtration
Two carbon filters, ~330 hours of print time
Controls
One button, three fan speeds
Certification
UL GREENGUARD Gold with Form Studio 1 + Alpha Resins
In the Box
VOC Extractor
SKU
FH-VOC-01 (Each)

RESOURCES

Downloads & Technical Support

Everything you need to choose and run Formlabs VOC Extractor with confidence.

VOC Extractor Technical Data
Formlabs-published specifications, compatibility, and what is included.
View specifications →
Consumables & Maintenance Guide
Formlabs guidance on tank, mixer and build platform care and replacement.
Rev1 Technical Support
Application review, sample prints, and post-sales engineering guidance from Rev1 Technologies.

WHY REV1 TECH

Authorized Formlabs Reseller. Resin & SLS Production Specialists.

Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.

YOUR REV1 PARTNER
AUTHORIZED FORMLABS RESELLER
01
Application Engineering
We help you pick the right Formlabs tanks, platforms and spares for your printers.
02
Onboarding & Training
Rev1 handles setup and operator training on PreForm, Dashboard, and the print-to-post workflow.
03
Ongoing Support
Direct access to Rev1’s technical team for printer, consumables and maintenance questions.
04
Free Sample Print
Send us your STL. We’ll arrange a Formlabs sample part and ship it to you — or get an instant print quote.
05
In-Person Demo
Visit our Auburn Hills facility or schedule a demo at your site.
06
Consumables & Parts
Genuine Formlabs resins, tanks, build platforms, and post-processing — sourced and supported from the USA.
Buyer FAQ

Formlabs VOC Extractor — questions buyers ask.

Which printers does it work with?
Form Studio 1 and Form 4. The UL GREENGUARD Gold certification applies to Form Studio 1 used with Alpha Resins.
How long do the filters last?
Roughly 330 hours of print time; they are replaceable in seconds.
Do I need an enclosure or vented room?
No — it plugs into the printer’s exhaust port and runs on your desk.
How much does it reduce VOCs?
In Formlabs’ sealed-chamber TVOC tests, Form Studio 1 with the extractor peaked at less than a fifth of a competitor printer’s VOC level.
What is it used for?
Formlabs lists it for printing in schools, offices and homes; form Studio 1 with Alpha Resins; form 4 in shared spaces.
Is it a genuine Formlabs part?
Yes. Rev1 is an authorized Formlabs reseller, and every accessory we ship is a genuine Formlabs part.

PRINT WITH GENUINE FORMLABS RESIN

Order the Formlabs VOC Extractor

Order the VOC Extractor, or talk to a Rev1 specialist about spares and consumables for your Formlabs printers.

Reply within 1 business day We validate fit — not just take orders Authorized Formlabs reseller in the USA US support & training

Auburn Hills, Michigan's premier source for industrial 3D printers, 3D scanners, materials, and software. Serving engineers and manufacturers across North America.

Products
Company
Contact
Payment methods
AMEXApple PayGoogle PayPayPalShop PayUnionPayVISA
Pay over time

© 2026 Rev1 Technologies. All rights reserved.