CreatBotPro HS Extruder E2 MotorGenuine CreatBot Replacement Part
Extruder E2 Motor for D400 HS, D600 Pro3 HS and D1000 Pro HS
The CreatBot extruder E2 motor (part 131039) drives the second extruder on the CreatBot D400 HS, D600 Pro3 HS and D1000 Pro HS. The second extruder is usually the one printing support material or a second color, so when its motor starts to fail you tend to see weak supports, gaps in the second material and a print that fails on the overhangs rather than on the main walls. Full specifications →
Genuine CreatBot part, shipped from Rev1 — your authorized CreatBot dealer and service partner. Not sure it fits? Call (248) 707-2950.
Genuine CreatBot Pro HS Extruder E2 Motor, from an authorized CreatBot dealer.
An authentic CreatBot replacement part, not a third-party copy. Rev1 Technologies is an authorized CreatBot dealer and certified CreatBot service provider in Auburn Hills, Michigan.
Why fit a genuine CreatBot E2 motor
The same motor the HS printers ship with, for the original mount and cable.
E1 and E2 behave the same, so your dual extrusion profiles stay valid.
The same part fits the D400 HS, D600 Pro3 HS and D1000 Pro HS.
Signs the E2 motor is failing
E2 clicks or skips with a clear nozzle and filament path.
E2 does not respond to load or extrude commands.
Supports or second color sections print thin, stringy or not at all.
A clog, a worn drive gear or a loose connector can look similar. Rev1 support can help you confirm the motor is at fault.
Compatible CreatBot 3D printers
The first extruder uses the extruder E1 motor, part 131038. The D600 Pro3 HS Z-axis motor is part 131040.
Installation tips
Unload the E2 filament, let the hotend cool, then power off and unplug the printer. Photograph the wiring and note the drive gear position. Fit the new motor in the same orientation, line the drive gear up with the filament path and reset the tension. Extrude a test length through E2 and run a small dual extrusion test print before returning to production work.
CreatBot Pro HS Extruder E2 Motor Specifications
WHY REV1 TECH
Sold and Supported by Rev1 Technologies
Rev1 Technologies is an authorized CreatBot dealer and certified CreatBot service provider in the US. Not sure which part your printer needs? Send us your printer model and serial number and our team will confirm the right part before it ships. We also handle installation, repair and preventive maintenance on CreatBot printers.
CreatBot Pro HS Extruder E2 Motor — Questions
Is the E2 motor interchangeable with the E1 motor?
They are separate CreatBot parts. Order 131039 for E2 and 131038 for E1.
Does it fit the D1000 HS?
No. The D1000 HS uses extruder motors 131005 and 131006.
Is this a genuine CreatBot part?
Yes. It is part 131039, supplied by Rev1 Technologies, an authorized CreatBot dealer.
Is this a genuine CreatBot part?
Yes. Rev1 Technologies is an authorized CreatBot dealer and certified CreatBot service provider in the US, and every part we sell is a genuine CreatBot part.
How do I confirm it fits my printer?
Send us your printer model and serial number, or call (248) 707-2950, and our team will confirm the right part before it ships.
Can Rev1 install it for me?
Yes. We handle installation, repair and preventive maintenance on CreatBot printers. Ask us about on-site or depot service.