CreatBotPEEK-250 / PEEK-300 Water Pump with BottleGenuine CreatBot Replacement Part
Water Pump with Water Bottle for PEEK-250 and PEEK-300 3D Printers
The CreatBot water pump with water bottle is the OEM pump and reservoir assembly for the water cooling system on the CreatBot PEEK-250 and PEEK-300. These printers run very hot to print PEEK and other high performance polymers, and a water cooling loop carries heat away from the parts that must stay cool. The pump keeps coolant moving through the loop, and the bottle holds the coolant supply. CreatBot sells this assembly under two part numbers, one for each printer, and this listing offers both. Full specifications →
Genuine CreatBot part, shipped from Rev1 — your authorized CreatBot dealer and service partner. Not sure it fits? Call (248) 707-2950.
Genuine CreatBot PEEK-250 / PEEK-300 Water Pump with Bottle, from an authorized CreatBot dealer.
An authentic CreatBot replacement part, not a third-party copy. Rev1 Technologies is an authorized CreatBot dealer and certified CreatBot service provider in Auburn Hills, Michigan.
One part, two CreatBot part numbers
CreatBot lists the assembly as 180003 for the PEEK-300 and as 180005 for the PEEK-250. CreatBot confirmed they are the same physical part, so either number fits either printer. Pick your printer's number and you receive the identical pump and bottle.
Signs the pump needs replacing
No visible flow in the lines, or the printer reports a cooling or flow error.
The pump hums, rattles or runs intermittently.
A cracked or leaking bottle or pump housing.
Filament softening early or jamming because the cooled section is running warm.
Choose your printer
| Printer | CreatBot part number | Fits |
|---|---|---|
| PEEK-300 | 180003 | PEEK-250, PEEK-300 |
| PEEK-250 | 180005 | PEEK-250, PEEK-300 |
Compatible CreatBot 3D printers
CreatBot also sells the pump without a bottle: PEEK300 Water Pump V1 (180001), PEEK300 Water Pump V2 (180002) and PEEK250 Water Pump (180004). The water flow sensor for both printers is part 180006.
Which part number should I choose?
Either one. The assembly is identical, and CreatBot catalogs it once for each printer. Choose this listing when you want the pump and bottle together, for example when the bottle is cracked or you are rebuilding the loop. If only the pump has failed and the bottle is sound, the pump-only parts listed above may suit you. If the flow error persists with a working pump, check the flow sensor (180006).
Installation tips
Power the printer off and let the hotend and chamber cool completely. Place a towel under the pump, drain the loop, and note how each hose connects before removal. Fit the new pump and bottle, secure the hoses, refill with coolant and check every joint for leaks. Run the pump and confirm steady flow before you heat the printer.
CreatBot PEEK-250 / PEEK-300 Water Pump with Bottle Specifications
WHY REV1 TECH
Sold and Supported by Rev1 Technologies
Rev1 Technologies is an authorized CreatBot dealer and certified CreatBot service provider in the US. Not sure which part your printer needs? Send us your printer model and serial number and our team will confirm the right part before it ships. We also handle installation, repair and preventive maintenance on CreatBot printers.
CreatBot PEEK-250 / PEEK-300 Water Pump with Bottle — Questions
Which printer number do I need?
Either. 180003 (PEEK-300) and 180005 (PEEK-250) are the same assembly and fit both printers.
Does this include the water bottle?
Yes. This part is the water pump with the water bottle.
Can Rev1 service my PEEK printer?
Yes. Rev1 Technologies is a certified CreatBot service provider and an authorized CreatBot dealer.
Is this a genuine CreatBot part?
Yes. Rev1 Technologies is an authorized CreatBot dealer and certified CreatBot service provider in the US, and every part we sell is a genuine CreatBot part.
How do I confirm it fits my printer?
Send us your printer model and serial number, or call (248) 707-2950, and our team will confirm the right part before it ships.
Can Rev1 install it for me?
Yes. We handle installation, repair and preventive maintenance on CreatBot printers. Ask us about on-site or depot service.