CreatBotPEEK-250 Whole PlatformGenuine CreatBot Replacement Part
Whole build platform assembly for the CreatBot PEEK-300
The CreatBot PEEK-250 whole platform (part 181011) is a complete build platform assembly from CreatBot's high temperature PEEK printer line. CreatBot lists this platform as compatible with the PEEK-300. On a machine built for PEEK, PEI and other high performance polymers, the platform has to stay flat and hold adhesion under demanding conditions, so a damaged platform quickly shows up as failed first layers and parts lifting from the bed. Full specifications →
Genuine CreatBot part, shipped from Rev1 — your authorized CreatBot dealer and service partner. Not sure it fits? Call (248) 707-2950.
Genuine CreatBot PEEK-250 Whole Platform (Build Platform Assembly) for PEEK-300, from an authorized CreatBot dealer.
An authentic CreatBot replacement part, not a third-party copy. Rev1 Technologies is an authorized CreatBot dealer and certified CreatBot service provider in Auburn Hills, Michigan.
Signs the platform needs replacing
Parts lift or warp at the corners even with the correct bed surface and settings.
The platform is visibly bent, cracked or damaged.
The platform does not heat consistently and the fault points to the assembly.
Wiring or connectors on the platform show heat damage.
Compatible CreatBot 3D printer
CreatBot also makes a PEEK300 whole platform, part 181010, for the same printer. The two carry different part numbers, so please contact Rev1 support with your printer's serial number before you order and we will confirm which platform your PEEK-300 uses. Other platforms in the range include the F430 (181001, 181002), D600 Pro2 (181004) and D1000 HS (181007).
Installation tips
High temperature printers hold heat for a long time. Let the platform and chamber cool completely, then switch off and unplug the printer. Photograph the wiring and note how the cables are routed before removing anything. After fitting the new platform, confirm the cables clear the full Z travel, level the bed and run a first layer test with a standard material before you return to PEEK work. If your printer is under warranty, contact Rev1 first: we are a certified CreatBot service provider.
CreatBot PEEK-250 Whole Platform (Build Platform Assembly) for PEEK-300 Specifications
WHY REV1 TECH
Sold and Supported by Rev1 Technologies
Rev1 Technologies is an authorized CreatBot dealer and certified CreatBot service provider in the US. Not sure which part your printer needs? Send us your printer model and serial number and our team will confirm the right part before it ships. We also handle installation, repair and preventive maintenance on CreatBot printers.
CreatBot PEEK-250 Whole Platform (Build Platform Assembly) for PEEK-300 — Questions
Why is a PEEK-250 platform listed for the PEEK-300?
CreatBot's parts list shows part 181011 as fitting the PEEK-300. Because the PEEK300 platform (181010) fits the same printer, ask Rev1 to confirm the right one for your serial number.
Is this a complete platform?
Yes. It is the whole platform assembly, not a single plate or surface sheet.
Is this a genuine CreatBot part?
Yes. It is CreatBot part 181011, supplied by Rev1 Technologies, an authorized CreatBot dealer.
Why is there no photo of this part yet?
CreatBot has not supplied a product photo for this part yet. The part is identified by its CreatBot part number, and our team confirms it is the right part for your printer before it ships.
How do I confirm it fits my printer?
Send us your printer model and serial number, or call (248) 707-2950, and our team will confirm the right part before it ships.
Can Rev1 install it for me?
Yes. We handle installation, repair and preventive maintenance on CreatBot printers. Ask us about on-site or depot service.