CreatBotHS Part Cooling FanGenuine CreatBot Replacement Part
HS Part Cooling Fan, Front and Back, for D600 Pro2 HS and D1000 HS 3D Printers
The CreatBot HS part cooling fan is the OEM fan that cools freshly printed plastic on the print head of the CreatBot D600 Pro2 HS and D1000 HS. A part cooling fan sets each line before the next one lands on it, which keeps overhangs, bridges and fine detail clean. The HS print head uses a front fan and a back fan, so this listing comes in a front and a back position, each under the CreatBot number for your printer. Full specifications →
Genuine CreatBot part, shipped from Rev1 — your authorized CreatBot dealer and service partner. Not sure it fits? Call (248) 707-2950.
Genuine CreatBot HS Part Cooling Fan, from an authorized CreatBot dealer.
An authentic CreatBot replacement part, not a third-party copy. Rev1 Technologies is an authorized CreatBot dealer and certified CreatBot service provider in Auburn Hills, Michigan.
How the options work
The front fan is one part listed under two CreatBot numbers: 150002 for the D600 Pro2 HS and 150005 for the D1000 HS. CreatBot confirmed they are the same physical fan, and each fits both printers, so pick your printer's number. The back fans are different parts: 150003 fits the D600 Pro2 HS only, and 150006 fits the D1000 HS only.
Signs a cooling fan needs replacing
One fan does not spin, spins slowly or stops during a print.
Overhangs droop or one side of a print looks worse than the other.
Rattling or grinding from the front or back of the print head.
Choose your position and printer
| Position | Printer | CreatBot part number | Fits |
|---|---|---|---|
| Front | D600 Pro2 HS | 150002 | D600 Pro2 HS, D1000 HS |
| Front | D1000 HS | 150005 | D600 Pro2 HS, D1000 HS |
| Back | D600 Pro2 HS | 150003 | D600 Pro2 HS only |
| Back | D1000 HS | 150006 | D1000 HS only |
Compatible CreatBot 3D printers
Fit differs by variant: both front fans fit both printers, while each back fan fits only its own printer. CreatBot also lists a D600 Pro2 HS back fan named Cooling Fan back4020 (part 150040). If you are unsure which back fan your printer has, contact Rev1 support before you order.
Which position do I need?
Check which fan has failed. Spin each fan by hand with the printer off, or watch both while cooling runs during a print. For the front fan, either number works on either printer. For the back fan, order the number for your own printer. The part cooling fans are separate from the hotend sink fan (150001 or 150004).
Installation tips
Power the printer off and let the hotend cool. Note the fan's mounting, airflow direction and cable route, then unplug it at its connector. Fit the new fan the same way, keep the cable clear of moving parts and hot surfaces, and confirm it spins when part cooling turns on.
CreatBot HS Part Cooling Fan Specifications
WHY REV1 TECH
Sold and Supported by Rev1 Technologies
Rev1 Technologies is an authorized CreatBot dealer and certified CreatBot service provider in the US. Not sure which part your printer needs? Send us your printer model and serial number and our team will confirm the right part before it ships. We also handle installation, repair and preventive maintenance on CreatBot printers.
CreatBot HS Part Cooling Fan — Questions
Which position and printer number do I need?
Match the fan that failed. Front: 150002 or 150005, both fit both printers. Back: 150003 for the D600 Pro2 HS or 150006 for the D1000 HS.
Are the front and back fans the same?
No. They are different parts. Only the two front fan numbers are the same part.
Is this the sink fan?
No. The sink fan cools the hotend heat sink and is part 150001 or 150004.
Is this a genuine CreatBot part?
Yes. Rev1 Technologies is an authorized CreatBot dealer and certified CreatBot service provider in the US, and every part we sell is a genuine CreatBot part.
How do I confirm it fits my printer?
Send us your printer model and serial number, or call (248) 707-2950, and our team will confirm the right part before it ships.
Can Rev1 install it for me?
Yes. We handle installation, repair and preventive maintenance on CreatBot printers. Ask us about on-site or depot service.