CreatBotF430 NX X Motor, RightGenuine CreatBot Replacement Part
F430 NX X-Axis Motor, Right
The CreatBot F430 NX right X motor (part 131008) is the OEM X-axis motor for the right side of the CreatBot F430 NX. CreatBot lists it as the 430 NX X motor right. The F430 NX uses two X motors, a left and a right, and this is the right-hand one. The X motor drives the toolhead across the printer, so its condition directly affects positioning, surface quality and dimensional accuracy along the X axis. Full specifications →
Genuine CreatBot part, shipped from Rev1 — your authorized CreatBot dealer and service partner. Not sure it fits? Call (248) 707-2950.
Genuine CreatBot F430 NX X Motor, Right, from an authorized CreatBot dealer.
An authentic CreatBot replacement part, not a third-party copy. Rev1 Technologies is an authorized CreatBot dealer and certified CreatBot service provider in Auburn Hills, Michigan.
Signs the X motor may need replacing
That continue after belts, pulleys and the motion path have been checked.
From the motor during moves.
On the right X drive while the printer otherwise responds.
To the motor, its shaft or its connector.
Loose belts, a slipping pulley, a damaged cable or a driver fault can all look like a failed motor. Rev1 support can help you test before you replace it.
Compatible CreatBot 3D printer
Other F430 NX motors
Each F430 NX motor has its own part number. Order the one in the position that failed:
X motor, left: 131007
X motor, right: 131008 (this part)
Y motor: 131009
Z motor: 131010
Extruder motors, left and right: 131011 and 131012
The original F430 has different motors, for example the F430 X motor is part 131018.
Installation tips
Power the printer off and unplug it. Photograph the motor, its mounting and the belt path before removal, and mark the cable so it goes back on the same motor. Transfer the pulley if required, mount the new motor, set the belt tension as before, then home the printer and run a test print to check X positioning.
CreatBot F430 NX X Motor, Right Specifications
WHY REV1 TECH
Sold and Supported by Rev1 Technologies
Rev1 Technologies is an authorized CreatBot dealer and certified CreatBot service provider in the US. Not sure which part your printer needs? Send us your printer model and serial number and our team will confirm the right part before it ships. We also handle installation, repair and preventive maintenance on CreatBot printers.
CreatBot F430 NX X Motor, Right — Questions
Is the right X motor the same as the left?
CreatBot lists them as separate parts: left is 131007, right is 131008.
Will it fit the original F430?
No. The F430 uses its own X motor, part 131018.
Is this a genuine CreatBot motor?
Yes. It is CreatBot part 131008, supplied by Rev1 Technologies, an authorized CreatBot dealer and certified service provider.
Is this a genuine CreatBot part?
Yes. Rev1 Technologies is an authorized CreatBot dealer and certified CreatBot service provider in the US, and every part we sell is a genuine CreatBot part.
How do I confirm it fits my printer?
Send us your printer model and serial number, or call (248) 707-2950, and our team will confirm the right part before it ships.
Can Rev1 install it for me?
Yes. We handle installation, repair and preventive maintenance on CreatBot printers. Ask us about on-site or depot service.