CreatBotD600 Pro E2 Extruder MotorGenuine CreatBot Replacement Part
For the CreatBot D600 Pro
The CreatBot D600 Pro E2 motor (part 131022) drives the second extruder (E2) on the CreatBot D600 Pro dual extrusion 3D printer. E2 is the extruder you rely on for a second color or for support material, so a failing E2 motor tends to show up in dual material jobs first: supports that print thin or break away, or a second color that fades out mid-print. Full specifications →
Genuine CreatBot part, shipped from Rev1 — your authorized CreatBot dealer and service partner. Not sure it fits? Call (248) 707-2950.
Genuine CreatBot D600 Pro E2 Extruder Motor, from an authorized CreatBot dealer.
An authentic CreatBot replacement part, not a third-party copy. Rev1 Technologies is an authorized CreatBot dealer and certified CreatBot service provider in Auburn Hills, Michigan.
Why replace with a genuine CreatBot motor
So it mounts in the original position and plugs into the original cable.
So feeding behaves the way the stock firmware and slicer profiles expect.
With E1 and E2 feeding the same way again.
Signs the E2 motor is failing
E2 does not turn during load or extrude commands.
Clicking or skipping on E2 only, with a clear nozzle and filament path.
Weak or missing support structures or second color sections.
Rule out a clog, a worn drive gear and a loose cable first. Rev1 support can help you confirm the motor is the cause.
Compatible CreatBot 3D printer
The first extruder uses the D600 Pro E1 motor, part 131021. The D600 Pro Z motor is part 131023.
Installation tips
Unload filament from E2, let the hotend cool, then switch off and unplug the printer. Photograph the wiring and note the position of the drive gear before you take the old motor out. Fit the new motor the same way round, align the drive gear with the filament path and reset the idler tension. Extrude a short length through E2 and print a small dual extrusion test to confirm both extruders feed evenly.
CreatBot D600 Pro E2 Extruder Motor Specifications
WHY REV1 TECH
Sold and Supported by Rev1 Technologies
Rev1 Technologies is an authorized CreatBot dealer and certified CreatBot service provider in the US. Not sure which part your printer needs? Send us your printer model and serial number and our team will confirm the right part before it ships. We also handle installation, repair and preventive maintenance on CreatBot printers.
CreatBot D600 Pro E2 Extruder Motor — Questions
Can I use this motor on E1?
Order the part listed for the position you are replacing: 131021 for E1 and 131022 for E2.
Does it fit the D600 Pro2?
No. The D600 Pro2 E2 motor is part 131025.
Can Rev1 do the repair?
Yes. Rev1 is a certified CreatBot service provider and can replace and test the extruder motor for you.
Is this a genuine CreatBot part?
Yes. Rev1 Technologies is an authorized CreatBot dealer and certified CreatBot service provider in the US, and every part we sell is a genuine CreatBot part.
How do I confirm it fits my printer?
Send us your printer model and serial number, or call (248) 707-2950, and our team will confirm the right part before it ships.
Can Rev1 install it for me?
Yes. We handle installation, repair and preventive maintenance on CreatBot printers. Ask us about on-site or depot service.