Formlabs Form Studio 1 Professional Resin Printing for Anyone
Most parts in under two hours, razor-sharp 35 µm detail, and the first UL GREENGUARD Gold resin workflow.
The Formlabs Form Studio 1 is the first affordable, professional-grade resin 3D printer: a Low Force Display™ engine with a 28-LED collimated backlight and 35 µm pixels, automatic resin dispensing, five control systems, and an open platform that prints any 405 nm resin. Paired with Alpha Resins and the Formlabs VOC Extractor, it is the first and only resin printer with UL GREENGUARD Gold certification for low chemical emissions — safe and mess-free enough for a home office, workshop, or classroom. Full specifications →
Base is the printer, Resin Tank, and Build Platform. Complete adds Form Studio Wash+Cure; Professional adds Form Wash V2 and Form Cure V2. Violet and Teal are Formlabs’ limited Founders’ Edition colors, while stock lasts. Questions? Call (248) 707-2950.

Factory-Built Precision. US-Supported by Rev1.
Every Form Studio 1 goes through a 28-point calibration and a complete test print before it leaves the Formlabs factory. Rev1 adds setup help, resin selection, and US-based support from our Auburn Hills, Michigan team.

Professional resin printing, without the professional price or the mess.
Form Studio 1 brings the speed, detail, and reliability of Formlabs’ Form 4 engine to a $699 desktop printer, with a resin workflow certified safe enough for the spaces where people actually create — at home, in a shared workshop, or in the office.
A 3D printer that is safe to use in your home, workshop, or office.



The Low Force Display™ engine, built for the desktop.
Form Studio 1 uses the same Low Force Display architecture as Form 4 — a collimated backlight, a masking Light Processing Unit, a textured release layer, and an oxygen-permeable tank — tuned for a compact, affordable printer.
A uniform, highly collimated light field
A custom lens array and 28 LEDs produce a uniform, highly collimated light field that delivers 6 mW/cm² at the print plane. It cures resin quickly, evenly, and accurately anywhere on the platform, while the Light Processing Unit Studio 1 masks each layer at a 35 µm pixel size.
Lower suction forces, faster layers
A textured lens array lets air flow between the Light Processing Unit and the film, so the tank film does not stick to the display like a suction cup. Lower peel forces mean faster printing, lighter supports, and cleaner fine features.
An oxygen-permeable film for fewer supports
A new durable, highly oxygen-permeable film creates a thin inhibition zone where the resin stays uncured, which increases speed and reduces the supports a part needs. Formlabs rates the tank for 75,000+ layers with any Formlabs material.
Get more done, with most prints in under two hours.
Formlabs timed the same parts on Form Studio 1, Form 4, a benchmark SLA printer, and a benchmark FDM printer. Typical print time uses the 80th-percentile print height (53 mm) at 100 µm.
Arduino case: 8 minutes
Printed in Alpha Fast Resin at 250 µm, a small electronics case finishes in 8 minutes on Form Studio 1 — faster even than Form 4, and a fraction of the time on a benchmark SLA or FDM printer.
Speaker enclosure: 1 h 43 min
A full-size speaker enclosure prototype in Alpha Fast Resin takes 1 h 43 min, against more than seven hours on a benchmark SLA printer and nearly 16 hours on a benchmark FDM printer.



Setting the standard for resin safety.
Formlabs designed Form Studio 1 and Alpha Resins together so resin printing can live in shared spaces. Figures below are from Formlabs’ published testing.
UL GREENGUARD Gold certified, with the VOC Extractor
Form Studio 1, paired with Alpha Resins and the Formlabs VOC Extractor, is the first and only resin 3D printer certified UL GREENGUARD Gold for low chemical emissions. In Formlabs’ sealed-box test, total VOCs after four hours stayed at 0.66 mg/m³ with the extractor (baseline 0.52), versus 1.70 for Form Studio 1 alone and 4.21 for a competitor printer.
Certified skin-safe parts, non-hazardous ingredients
Parts printed in Alpha Resins are safe for long-term skin contact: non-cytotoxic, non-irritating, and non-sensitizing. The resins contain no chemicals with known acute toxicity or known long-term effects on organ or reproductive health, and they emit few VOCs for a more pleasant print environment.



Print amazing parts.
Sharpest details
Highly collimated light and 35 µm pixels with finely tuned anti-aliasing give sub-pixel resolution — this sculpture was printed in Alpha Model Resin at 50 µm layers. Lower peel forces, light-touch supports, and precisely dosed light exposure leave smooth, layer-free surfaces.
Assemblies that fit right off the printer
XY tolerances reach down to ±0.08 mm, and material settings are tuned to each resin’s shrinkage so parts match your model — like this harmonic drive assembly printed in Alpha White Resin at 100 µm.
Formlabs’ reliability, so you can spend time creating instead of calibrating and cleaning.
Formlabs reports Form Studio 1’s print success as comparable to Form 4, which third-party testing measured at 99%; Form Studio 1 reliability testing is still in progress. These are the systems behind it.
Never pour resin again
Resin Cartridge V2 docks into the printer and dispenses automatically, so the workflow stays clean and switching materials is a cartridge swap. Five integrated sensors control resin temperature, resin level, print forces, leveling, and print status.
Pop parts off in seconds with Build Platform Flex
With Build Platform Flex, parts release by flexing the platform — no scraper or tools required. Every printer goes through a 28-point calibration and a complete test print at the factory, and Formlabs engineers validate settings for every material on hundreds of parts.
Watch prints and make timelapses from your phone
A 1920 × 1080 camera with a stage light records print history and timelapses and streams to the Form Mobile app and Dashboard, with touchscreen, audio, SMS, and email alerts. The camera can be disabled, covered, or removed.
Get started with Alpha Resins, then push boundaries with advanced materials.
Alpha Resins are general-purpose resins with great aesthetics, mechanical properties, and speed at an affordable price (from $29 per liter). Form Studio 1 runs nine Formlabs materials today, with more in development, and is fully open to third-party resins. Browse Rev1’s 3D printing resins.






Powerful software, included: PreForm, Dashboard, and Form Mobile.
PreForm prepares prints in minutes: One-Click Print suggests the optimal orientation, supports, and layout, with full manual control when you need it — auto mesh repair, adaptive layer thickness, and a layer slicer for inspection. Form Mobile tracks prints in real time, makes timelapse videos, and notifies you the moment a print is done; Dashboard tracks resin and tank usage and manages printers. PreForm runs on Windows 10 (64-bit) and macOS 13 or later and imports STL, OBJ, 3MF, and native CAD files.

Pro results, no expertise required: anyone can learn to print in 10 minutes.
Formlabs designed Form Studio 1 so a first-time resin user is printing within minutes of unboxing.
Three packages, three colors — choose in the buy box above.
Formlabs sells Form Studio 1 as one product with a package, color, and build-platform choice; the buy box above works the same way. Prices are Formlabs’ US list. Founders’ Edition Violet and Teal are a limited run, available only while Formlabs stock lasts.



Every Form Studio 1 package includes:
Form Studio 1 vs. Form 4: which Formlabs desktop printer?
Both use Formlabs’ Low Force Display engine. Form Studio 1 is the affordable, open, low-emission printer for makers, schools, and design teams; Form 4 is the professional workhorse with the widest material library. Figures are from Formlabs’ published tech specs.
| Capability | Formlabs Form Studio 1 | Formlabs Form 4 |
|---|---|---|
| Build volume | 200 × 125 × 235 mm (5.9 L) | 200 × 125 × 210 mm (5.3 L) |
| XY pixel size | 35 µm | 50 µm |
| Backlight / intensity | 28 LEDs · 6 mW/cm² | 60 LEDs · 16 mW/cm² |
| Max print speed | Up to 130 mm/hr | Up to 100 mm/hr |
| Layer thickness | 25–250 µm | 25–200 µm |
| Formlabs materials | 9 (Alpha Resins + advanced) | 23 |
| Open Material Mode | Included | Available |
| Reliability | Comparable to Form 4 (testing in progress) | 99% (third-party lab) |
| Camera | 2MP | 5MP |
| Weight / power | 14.3 kg · 300 W | 18.3 kg · 480 W |
| Starting price at Rev1 | $699 (Base) | $2,625 (Basic Package) |
Need tougher engineering resins, dental or medical materials, or a larger build? See the Formlabs Form 4, the large-format Form 4L, or browse all SLA printers and resin LCD printers.
Formlabs Form Studio 1 Technical Data
RESOURCES
Downloads & Technical Support
Everything you need to set up and run your Formlabs Form Studio 1 with confidence.
WHY REV1 TECH
Authorized Formlabs Reseller. Resin Production Specialists.
Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.