Formlabs Form 4BL A New Era of Medical Manufacturing
Large biocompatible parts and full-platform batches, with same-day turnaround for the cases that cannot wait.
The Formlabs Form 4BL is the large-format, healthcare version of Form 4L: the Low Force Display™ engine with a 145-LED backlight and 46 µm pixel across a 353 × 196 × 350 mm build volume — 4.6× Form 4B — validated for Formlabs’ biocompatible BioMed and dental resins. Hospitals and device makers use it for full-size anatomical models, sizing trials, surgical guides, and single-use instruments in a single overnight-free build. Full specifications →
Rev1 quotes every Form 4BL package with delivery, site planning, and onboarding for your clinical team — call (248) 707-2950. Switch packages above to compare what each includes.

Factory-Built Precision. US-Supported by Rev1.
Every Form 4BL passes a 60-point calibration and quality-control inspection before it leaves the Formlabs factory, and BioMed resins are made in an FDA-registered, ISO 13485-certified facility. Because it is a 58.5 kg machine with an 89 × 117 cm access footprint, Rev1 also plans delivery, placement, power, and ventilation with you before it ships.

A new era of medical manufacturing: big parts, biocompatible materials, same-day turnaround.
Form 4BL gives hospitals and medical device makers the large-format capacity of Form 4L with the biocompatible material access of Form 4B. Full-size anatomy, whole sets of sizing trials, and production runs of single-use instruments come off one platform the same day they are requested.
Hospitals and device makers running Form 4BL.
Quotes are from Formlabs’ published Form 4BL customer stories.



The LFD engine, scaled to large format.
Form 4BL replaces the dual-laser optics of the Form 3L with a large-area Low Force Display™ engine that cures an entire layer at once. Print time now depends on part height, not on how much of the platform you fill.
145 LEDs, collimated edge to edge
The Form 4BL Backlight Unit projects ultra-high-power light from 145 uniform-wavelength LEDs through a plano-convex lens array, with integrated air cooling. Uniform, straight light is what lets a part in the far corner of a 692 cm² platform cure exactly like one in the center — essential when you fill the whole build area with production parts.
46 µm pixels across a large-format mask
The LPU 4L masks the backlight into each layer’s shape at a 46 µm pixel size with factory-tuned anti-aliasing for sub-pixel edges — finer than the Form 4’s 50 µm. Formlabs built it to be long-lasting, resistant to accidental damage, and easy to replace, so the largest optical part in the printer does not dictate your uptime.
Low peel forces matter most on big cross-sections
Peel force grows with layer area, which is why large resin parts have historically printed slowly or failed. A micro-textured optical film on top of the LPU lets air flow between the tank and the display, so even a wide layer releases gently. The result: fast layers, intact fine features on big parts, and light-touch supports that leave small witness marks.
Solve big problems with large-scale medical parts.
Print one part the size of a pelvis or rib cage, or fill the platform with dozens of trials and instruments in a single job — to accelerate device development or keep clinical production running.
353 × 196 × 350 mm in one build
Form 4BL’s 24.2-liter build volume is 4.6× that of Form 4B (200 × 125 × 210 mm, 5.2 L). The same Low Force Display engine cures every layer across the full platform at once, so a full plate takes about as long as one tall part.
From prototype to commercial device
Formlabs printers helped PSYONIC create the Ability Hand, an FDA-registered, Medicare-covered upper-limb prosthesis. In-house printing let the team iterate quickly and test with specialized resins instead of outsourcing — the same path Form 4BL opens for larger devices, fixtures, and enclosures.
Solutions for every stage of the process.






Stunning parts that always fit, rivaling injection molding.
Most accurate assemblies: ±0.15% XY
QuikBow is a sterile-ready, single-use tension bow for skeletal traction in the operating room, letting trauma centers use a smaller wire without a Kirschner bow. Parts like this depend on mating features that fit every time: Form 4BL holds ±0.15% XY dimensional tolerance so assemblies go together straight off the platform.
Low peel forces, light-touch supports, crisp edges
Lower peel forces, Light Touch Supports, and a 46 µm pixel with pre-tuned anti-aliasing leave smooth surfaces and fine detail across the whole large-format platform — from lattice cranial implants to thin-walled guides — with less hand finishing before cleaning and sterilization.
Speed that scales: same-day turnaround for large prints.
Formlabs timed full builds of real medical parts on Form 4BL, a leading FDM printer, a benchmark SLA printer, and the previous-generation Form 3BL. Some competitor builds were scaled to 80% or reduced in part count to fit, as Formlabs notes.
Arbutus Medical QuikBow arms: under 10 hours
A full platform of QuikBow arms finishes in 9 h 56 min on Form 4BL — less than two-thirds of the benchmark SLA time and a fifth of Form 3BL’s 50 hours, turning a two-day job into an overnight-free one.
restor3d spinal sizing trials: 7 h 46 min
restor3d prints whole sets of spinal sizing trials in one job. Form 4BL completes the platform in 7 h 46 min, against more than 43 hours on a leading FDM printer and 68 hours on Form 3BL — so trials for tomorrow’s case are ready the same day.



The large-format LFD engine behind Form 4BL
Formlabs’ launch film for Form 4 and Form 4L — which Formlabs features on its Form 4BL page — shows the Low Force Display engine at desktop and large format, the hardware Form 4BL is built on.
Two cartridges, automatic dispensing, six sensors.
Dual Resin Cartridge V2 for big jobs
Large parts consume a lot of resin, so Form 4BL takes two Resin Cartridge V2 cartridges and dispenses from them automatically as the print needs it. Material changes still take under a minute. Complete and Premium packages add the Form 4 Resin Pump for bulk feeding on high-volume jobs.
A large-format tank rated for 75,000+ layers
The Form 4L Resin Tank uses the same dual-layer flexible film stack as Form 4, sized for the large platform. It provides the cure surface for every layer and keeps peel forces low; Formlabs rates it for 75,000+ layers with any Formlabs material, and the Form 4L Mixer keeps resin homogeneous through long prints.
Six sensors holding every print to spec
Six upgraded control systems watch the conditions every material was validated against: high-speed conduction heating with infrared sensing brings resin to 25–45 °C, an ultrasonic sensor manages the tank level, a load cell measures what’s left in each cartridge, and a Z-axis force sensor tunes speed to each part’s geometry and material.
Large-format printing you can depend on.
A failed large print costs hours and liters of resin, so Formlabs engineered Form 4BL around the same reliability systems as Form 4. (Formlabs’ independent reliability testing of Form 4BL is still in progress; it has not yet published a success-rate figure.)
Calibrated at the factory, validated per material
Each Form 4BL receives a 60-point calibration and quality-control inspection before it ships. Formlabs optimization engineers validate print settings for every material by testing hundreds of printed parts, so a resin behaves the same on every Form 4BL in a fleet — and the same as it does on Form 4.
Check a six-hour print from anywhere
The integrated 5MP camera (2592 × 1944) records print history and timelapses and streams status to Formlabs Dashboard and the Form Mobile App, with SMS and email alerts and preventative-maintenance reminders. The camera can be disabled, covered, or removed for secure facilities.
Re-engineered consumables
Formlabs re-engineered the Form 4BL wear parts for years of use: a damage-resistant, user-replaceable LPU 4L, long-life resin tanks, and Resin Cartridge V2 that fills faster, wastes less, and stores in less shelf space — keeping cost per part predictable as the printer works harder.
Tackle any problem with industry-leading materials, including biocompatible options.
Biocompatible printing is what separates Form 4BL from Form 4L. BioMed resins are manufactured in Formlabs’ FDA-registered, ISO 13485-certified facility, each with its own contact rating — always confirm the material against your device’s intended use. Form 4BL also runs Formlabs’ dental resins (see Formlabs Dental), every standard Formlabs resin, and Open Material Mode. Browse Rev1’s 3D printing resins.


Learn to print large parts in four simple steps.
PreForm, Dashboard, and the Form Mobile App are free with the printer. PreForm handles One-Click Print, auto-orientation, automatic supports with manual editing, mesh repair, and adaptive layer thickness; Dashboard manages printers, resin usage, and alerts across a fleet.
Large-format printing, step by step
Formlabs’ Form 4BL workflow video follows a large job from PreForm setup through printing, Form Wash L, Form Cure L, and support removal. Rev1 walks your operators through the same process during onboarding.
Three Form 4BL packages, each quoted with delivery and site planning.
Each package has its own page, just as on Formlabs’ store — switch with the Package selector above. Every Form 4BL package is over $15,000, so Rev1 quotes it with delivery, placement, power, and onboarding for your clinical team included.



The Form 4BL Package includes:
Form 4BL vs. Form 4L and Form 4B: pick by size and material.
Form 4BL combines Form 4L’s large-format hardware with Form 4B’s biocompatible material access. Figures are from Formlabs’ published specifications and US store; Rev1 quotes Form 4BL packages.
| Capability | Formlabs Form 4BL | Formlabs Form 4L | Formlabs Form 4B |
|---|---|---|---|
| Build volume | 353 × 196 × 350 mm (24.2 L) | 353 × 196 × 350 mm (24.2 L) | 200 × 125 × 210 mm (5.2 L) |
| XY pixel size | 46 µm | 46 µm | 50 µm |
| Backlight | 145 LEDs | 145 LEDs | 60 LEDs |
| Biocompatible BioMed resins | Yes | No | Yes |
| Dental resins | Yes | No | Yes |
| Service plan | Dental and Medical Service Plan | Pro Service Plan | Dental and Medical Service Plan |
| Basic Package at Rev1 | Quote | $7,125 | $7,699 |
Parts that never contact a patient print for less on the Formlabs Form 4L; smaller biocompatible parts run faster per job on the Formlabs Form 4B. Browse all SLA printers and Rev1’s industrial 3D printer range.
Formlabs Form 4BL Technical Data
RESOURCES
Downloads & Technical Support
Everything you need to qualify, site, and run a Formlabs Form 4BL.
WHY REV1 TECH
Authorized Formlabs Reseller. Large-Format Resin Specialists.
Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.