Formlabs Form 3BL Factory Reconditioned
Full-scale anatomy and large medical devices in biocompatible resins, for $2,850.
The Formlabs Form 3BL Factory Reconditioned Package is the lowest-cost way to print large biocompatible parts in-house: a factory-reconditioned Form 3BL with a Form 3L Resin Tank V3, a Form 3L Build Platform, and the Form 3L Finish Kit. Developed for medical professionals, it prints adult anatomy at 1:1 scale and large medical devices in one build, and is compatible with 37 Formlabs materials — including 14 biocompatible materials made in Formlabs’ ISO 13485-certified facility. Key specifications →
Factory reconditioned by Formlabs. Form 3BL is succeeded by Form 4BL — Rev1 can help you compare. Questions? Call (248) 707-2950.

Factory-Built Precision. US-Supported by Rev1.
Each Factory Reconditioned Form 3BL is reconditioned and sold through Formlabs’ own store. Rev1 helps clinical teams plan delivery, placement, biocompatible workflows, and support from Auburn Hills, Michigan.

Large medical devices and anatomical replicas at full scale.
Form 3BL is the large-format printer Formlabs developed for medical professionals. A factory-reconditioned unit brings 1:1 anatomy, surgical tools, and large device prototypes in-house for $2,850.
What medical teams print on Form 3BL.
Examples from Formlabs’ Form 3BL page. Print time and cost vary with geometry, material, layout, and orientation.



Incredible part quality at large format.
Form 3BL shares the Form 3L’s large-format laser hardware and resolves fine details critical for diagnostic planning models.
Inside the Form 3 Series
Formlabs’ deep dive on the Form 3 and Form 3L covers the Light Processing Units, flexible-film tank, and sensors that Form 3BL is built on.
Detail down to the micron level
A 25 µm XY resolution and 250 mW lasers resolve the fine detail surgical planning models need, while the smooth surface finish and accuracy help medical devices meet production standards.
Explore the Form 3BL
Formlabs’ interactive tour of the Form 3BL shows the large-format print area, resin handling, and touchscreen.
Fits existing clinical workflows
Automatic resin dispensing, simple print preparation, and a thoughtfully designed interface mean no specialized technicians are required.
Adult anatomy and large devices at 1:1 scale.
Medical device prototypes, jigs, and end-use parts
Form 3BL is ideal for large parts requiring biocompatibility and sterilization compatibility, device prototypes, jigs, fixtures, assemblies, end-use parts, and surgeon- or patient-specific surgical tools.



A validated large-format workflow.
Prepare anatomy in PreForm
PreForm automatically suggests orientation, supports, and layout for large anatomical models, saving time during print setup.
Post-processing validated for biocompatible use
Form Wash L and Form Cure L have been validated and are compatible with Formlabs’ ISO 13485 materials for biocompatible use; the included Finish Kit covers manual washing to start.
Large prints, minimal supervision
The Form 3 Series large-format platform works around the clock with minimal supervision, helping clinical teams meet critical deadlines.
Materials for a wide array of medical applications.
Form 3BL is compatible with 37 Formlabs materials, including 14 biocompatible materials manufactured in Formlabs’ ISO 13485-certified, FDA-registered facility. Formlabs states parts can be sterilized using steam, e-beam, gamma, or EtO depending on the material — always confirm each resin against your device’s intended use.

The Factory Reconditioned Form 3BL Package includes:
Formlabs’ package contents for SKU PKG-F3BL-REFURB. Additional tanks, Resin Pump, Form Wash L, and Form Cure L are available separately.



Reconditioned Form 3BL vs. new Form 4BL and Form 3L.
Figures are from Formlabs’ published Form 3BL comparison table and store pages.
| Capability | Form 3BL (Reconditioned) | Form 4BL (New) | Form 3L (Reconditioned) |
|---|---|---|---|
| Technology | Stereolithography (SLA) | MSLA — Low Force Display | Stereolithography (SLA) |
| Light source | Two 250 mW lasers | Backlight Unit (145 LEDs) | Two 250 mW lasers |
| Build volume | 33.5 × 20 × 30 cm (21.4 L) | 35.3 × 19.6 × 35.0 cm (24.2 L) | 33.5 × 20 × 30 cm (21.4 L) |
| Biocompatible materials | Yes (14) | Yes (BioMed) | No |
| Printer weight | 54.4 kg | 58.5 kg | 54.4 kg |
| Price at Rev1 | $2,850 | Quote | $2,650 |
Need faster large-format medical printing? See the Formlabs Form 4BL or, for smaller biocompatible parts, the Form 4B.
Formlabs Form 3BL Factory Reconditioned — Key Data
RESOURCES
Downloads & Technical Support
Everything you need to set up and run your Formlabs Form 3BL with confidence.
WHY REV1 TECH
Authorized Formlabs Reseller. Resin Production Specialists.
Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.