Formlabs White Resin V5 Bright, Crisp White Parts
An exceptionally bright white General Purpose Resin for clean, presentation-ready parts.
Formlabs White Resin V5 is an exceptionally bright white General Purpose Resin, offering an optimal balance of fast print speed, high accuracy, presentation-ready appearance, strong mechanical properties, and an easy, reliable workflow. Create parts that are stiff and strong with a surface finish that rivals injection molding, in a bright matte white that captures fine features accurately. White Resin V5 is for the Form 4 generation of printers. Full specifications →
Genuine Formlabs resin from an authorized US reseller — ask Rev1 about bulk discounts (15% at 30 L up to 45% at 3,000 L). Call (248) 707-2950.

Factory-Built Precision. US-Supported by Rev1.
White Resin V5 is built and supported by Formlabs. Rev1 adds workflow and material guidance, onboarding, and US-based support from our Auburn Hills, Michigan team.

Fast, accurate, and presentation-ready.
What White Resin V5 is built for.
Clean, bright white
A bright matte white with crisp fine features — ideal for models that are painted, photographed or presented.
What’s new in V5
Three times faster on Form 4, a brighter and crisper white, and tougher: 2× elongation at break and 25% higher impact strength than White Resin V4.
Anatomical models
Formlabs recommends White Resin for anatomical models used in planning and communication.
Form and fit prototyping
Dimensionally accurate, stiff parts for checking form, fit and assembly.
Fine detail, presentation-ready
Intricate, presentation-ready models that capture every detail.
Properties by post-cure
Post-cured at 60 °C for 15 minutes, White Resin V5 reaches 61 MPa tensile strength, 2650 MPa tensile modulus and 11% elongation at break, per Formlabs’ tech specs.
For the Form 4 generation.
Form 4, Form 4B, Form 4L and Form 4BL. Wash and post-cure to reach the published properties.



Available sizes:
Choose the size in the buy box above.
Formlabs General Purpose Resins V5 compared.
Post-cured at 60 °C for 15 minutes, per Formlabs’ published tech specs. All $79 per 1 L.
| Property | Black V5 | Grey V5 | White V5 | Clear V5 |
|---|---|---|---|---|
| Finish | Black, matte | Grey, matte | White, matte | Transparent |
| Ultimate tensile strength | 61.0 MPa | 62.0 MPa | 61.0 MPa | 60.0 MPa |
| Tensile modulus | 2700 MPa | 2675 MPa | 2650 MPa | 2750 MPa |
| Elongation at break | 10% | 13% | 11% | 8% |
| Notched Izod | 29 J/m | 32 J/m | 29 J/m | 29 J/m |
| HDT @ 0.45 MPa | 69 °C | 71 °C | 62 °C | 74 °C |
Browse all Formlabs resins or the Formlabs brand page.
Formlabs White Resin V5 Technical Data
RESOURCES
Downloads & Technical Support
Everything you need to choose and run Formlabs White Resin V5 with confidence.
WHY REV1 TECH
Authorized Formlabs Reseller. Resin & SLS Production Specialists.
Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.