PRECISION CASTING RESIN • FORMLABS • REV1 TECH

Formlabs True Cast Resin Forgiving, Precise Casting

A wax-filled resin for precision casting, from intricate jewelry to engineering parts up to 5 mm thick.

Part 3D printed in Formlabs True Cast Resin

Formlabs True Cast Resin is a wax-filled material designed for precision casting of intricate jewelry and complex engineering components up to 5 mm thick, with highly accurate parts, exceptional detail and smooth surfaces. It integrates easily into a wide range of burnout schedules: low thermal expansion, minimal shrinkage and 0.03% ash content ensure clean burnout and consistent casting results, and parts keep their surface integrity with no wax migration or residue over time. Purple; for Form 4, Form 4B and Form Studio 1. Full specifications →

0.03%Ash content
5 mmMax thickness
25 µmMin. layer height
$1991 L for Form 4
Category
CastingPurple

Genuine Formlabs resin from an authorized US reseller — ask Rev1 about bulk discounts (15% at 30 L up to 45% at 3,000 L). Call (248) 707-2950.

Part 3D printed in Formlabs True Cast Resin
Rev1 Technologies · Authorized Formlabs Partner

Factory-Built Precision. US-Supported by Rev1.

True Cast Resin is built and supported by Formlabs. Rev1 adds workflow and material guidance, onboarding, and US-based support from our Auburn Hills, Michigan team.

Authorized Formlabs Reseller Workflow & Material Guidance US Stock, Parts & Training
Formlabs — official manufacturer of True Cast Resin
FormlabsOfficial Manufacturer
Rev1 Technologies — authorized Formlabs reseller, Auburn Hills MI
Rev1 TechnologiesAuthorized Reseller
Why Choose True Cast Resin

Reliable, precise casting.

Consistent, High-Quality Casting
Crisp features, smooth surfaces and superior accuracy for detailed cast parts.
Forgiving Casting
Low thermal expansion and no wax migration or residue over time.
Clean Burnout
0.03% ash and low shrinkage integrate easily into existing burnout workflows.
Versatile
Intricate jewelry, heavy jewelry and engineering components up to 5 mm thick.
Features

Applications and properties.

True Cast Resin frog patterns beside cast metal frogs

Figurines with fine detail

Crisp features and smooth surfaces carry through to the cast metal.

Figurines
True Cast Resin medallion pattern beside the cast medallion

Medallions

Accurate relief detail for medallions and coins.

Medallions
True Cast Resin ring patterns beside cast rings

Medium and heavy jewelry

Patterns for heavier rings and pieces that cast cleanly with 0.03% ash.

Jewelry
True Cast Resin gear patterns beside cast metal gears

Small engineering components

Complex engineering components up to 5 mm thick.

Up to 5 mm
Works With

Printers and post-processing.

Wash and post-cure to reach the published properties.

Formlabs Form 4 resin 3D printer
Form 4
The 1 L cartridge loads straight in. View Form 4 →
Formlabs Form Studio 1 resin 3D printer
Form Studio 1
Also compatible. View Form Studio 1 →
Formlabs Form Wash V2 part washer
Form Wash V2
Wash patterns after printing. View Form Wash V2 →
In the Box

Available sizes:

Choose the size in the buy box above.

1 L cartridge — Form 4Bulk: 15% off at 30 L → 45% off at 3,000 L
Compare

Formlabs casting resins compared.

From Formlabs’ published tech specs and data sheets.

PropertyCastable Wax ResinTrue Cast ResinClear Cast Resin
Best forUltrafine jewelry, filigreeJewelry to engineering parts up to 5 mm thickLarger patterns, geometries thicker than 3 mm
Composition20% wax-filledWax-filledClear photopolymer, latticed patterns
Ash content0.0–0.1%0.03%< 0.20%
Post-cureNot requiredPer Formlabs settingsRequired
PrintersForm 4 & Form 3 generations, Form 2, Form Studio 1Form 4, Form 4B, Form Studio 1Form 4 & Form 3 generations, Form 2, Form Studio 1
1 L price (Form 4)$299$199$149

Browse all Formlabs resins or the Formlabs brand page.

Specifications

Formlabs True Cast Resin Technical Data

Compatible Printers
Form 4, Form 4B, Form Studio 1
Compatible Tanks
Form 4 Resin Tank, Form Studio Resin Tank / Tank Pro
Print Technology
SLA
Category
Casting
Color
Purple
Minimum Layer Thickness
25 microns
Size
1 L cartridge — Form 4
Ash Content
0.03%
Thermal Expansion
≈ 174 µm/m/°C
Detected Transition Metals (> 10 ppm)
Al, Ca, K, Mg, Na, Pb, Si, Sn
High-Concentration Transition Metals (> 50 ppm)
None
Maximum Recommended Thickness
5 mm
SKU
RS-C2-TCLV-01 (1 L)

RESOURCES

Downloads & Technical Support

Everything you need to choose and run Formlabs True Cast Resin with confidence.

True Cast Resin Technical Data
Formlabs-published specifications, compatibility, and what is included.
View specifications →
Resin Print & Post-Processing Guide
Formlabs-recommended wash and post-cure settings and handling for this resin.
Rev1 Technical Support
Application review, sample prints, and post-sales engineering guidance from Rev1 Technologies.

WHY REV1 TECH

Authorized Formlabs Reseller. Resin & SLS Production Specialists.

Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.

YOUR REV1 PARTNER
AUTHORIZED FORMLABS RESELLER
01
Application Engineering
We help you choose the right Formlabs resin for your parts and set up wash and cure.
02
Onboarding & Training
Rev1 handles setup and operator training on PreForm, Dashboard, and the print-to-post workflow.
03
Ongoing Support
Direct access to Rev1’s technical team for resin guidance, troubleshooting, and maintenance.
04
Free Sample Print
Send us your STL. We’ll arrange a Formlabs sample part and ship it to you — or get an instant print quote.
05
In-Person Demo
Visit our Auburn Hills facility or schedule a demo at your site.
06
Consumables & Parts
Genuine Formlabs resins, tanks, build platforms, and post-processing — sourced and supported from the USA.
Buyer FAQ

Formlabs True Cast Resin — questions buyers ask.

What can I cast with it?
Intricate and heavy jewelry, medallions, figurines and small engineering components up to 5 mm thick.
Why is it forgiving?
Low thermal expansion and minimal shrinkage, and parts keep their surface integrity with no wax migration or residue over time.
Which printers can use it?
Form 4, Form 4B and Form Studio 1.
What size does it come in?
Formlabs sells True Cast Resin in a 1 L cartridge for Form 4.
Are there volume discounts?
Formlabs offers bulk order discounts from 15% at 30 L up to 45% at 3,000 L. Ask Rev1 for volume pricing.
What is it used for?
Formlabs recommends it for medium and heavy jewelry; medallions; figurines; small engineering components.

PRINT WITH GENUINE FORMLABS RESIN

Print with Formlabs True Cast Resin

Order True Cast Resin, or talk to a Rev1 specialist about the right engineering resin and volume pricing for your parts.

Reply within 1 business day We validate fit — not just take orders Authorized Formlabs reseller in the USA US support & training

Auburn Hills, Michigan's premier source for industrial 3D printers, 3D scanners, materials, and software. Serving engineers and manufacturers across North America.

Products
Company
Contact
Payment methods
AMEXApple PayGoogle PayPayPalShop PayUnionPayVISA
Pay over time

© 2026 Rev1 Technologies. All rights reserved.