IMPACT-RESISTANT ENGINEERING RESIN • FORMLABS • REV1 TECH

Formlabs Tough 1500 Resin V2 Polypropylene-Like Resilience

A resilient resin with the strength, stiffness and toughness of polypropylene — exceptional resistance to fractures, impacts and shattering.

Part 3D printed in Formlabs Tough 1500 Resin V2

Formlabs Tough 1500 Resin V2 is a resilient material with strength, stiffness and toughness comparable to polypropylene (PP), offering exceptional resistance to fractures, impacts and shattering. It balances stiffness and ductility for compliant mechanisms and rugged enclosures with self-tapping screws and snap fits, from functional prototypes to end-use jigs and fixtures. The V2 formulation for the Form 4 Series delivers 10 times higher fracture toughness than the previous version, and it is rated for skin contact. For Form Studio 1, Formlabs offers Tough 1500 (Form Studio 1). Full specifications →

155%Elongation at break
10×Work of fracture vs V1
66 °CHDT @ 0.45 MPa
34 MPaTensile strength
Category
Impact ResistantSkin contact

Genuine Formlabs resin from an authorized US reseller — ask Rev1 about bulk discounts (15% at 30 L up to 45% at 3,000 L). Call (248) 707-2950.

Part 3D printed in Formlabs Tough 1500 Resin V2
Rev1 Technologies · Authorized Formlabs Partner

Factory-Built Precision. US-Supported by Rev1.

Tough 1500 Resin V2 is built and supported by Formlabs. Rev1 adds workflow and material guidance, onboarding, and US-based support from our Auburn Hills, Michigan team.

Authorized Formlabs Reseller Workflow & Material Guidance US Stock, Parts & Training
Formlabs — official manufacturer of Tough 1500 Resin V2
FormlabsOfficial Manufacturer
Rev1 Technologies — authorized Formlabs reseller, Auburn Hills MI
Rev1 TechnologiesAuthorized Reseller
Why Choose Tough 1500 Resin V2

Toughness that rivals polypropylene.

Tougher Where It Matters
10× higher work of fracture so parts don’t fail when drilled, tapped or cracked; 3× higher Gardner impact for thin walls that don’t shatter.
Ductile and Resilient
155% elongation at break and Ross flex fatigue of 8,000 cycles for snap fits and compliant mechanisms.
Environmentally Stable
The highest temperature and UV resistance (66 °C HDT, ~30.4% elongation after 400 hours of accelerated aging) of any >100% elongation SLA material, per Formlabs.
Creep Resistant
Less than 3% strain under a 4 MPa load after two weeks — matching polypropylene.
Features

Applications and properties.

Buckles and clips printed in Tough 1500 Resin V2

Snap fits and buckles

155% elongation at break and 8,000-cycle flex fatigue let snap fits and buckles flex repeatedly without breaking.

155% elongation8,000 flex cycles
Buckle parts printed in Tough 1500 Resin V2

10× tougher than V1

10× higher work of fracture and 3× higher Gardner impact than the previous version, so parts survive drilling, tapping and drops.

10× work of fracture3× impact
Motorcycles with parts developed by Sirris

Rugged functional prototypes

Prototype parts with the resilience of polypropylene for real-world testing.

Functional prototypes
Engineer measuring a printed part with calipers

Holds its shape over time

Creep resistance matching polypropylene — less than 3% strain under a 4 MPa load after two weeks.

<3% creep
Works With

Printers and post-processing.

Wash and post-cure to reach the published properties.

Formlabs Form 4 resin 3D printer
Form 4
1 L cartridges load straight in. View Form 4 →
Formlabs Form 4L large-format resin 3D printer
Form 4L
Large-format builds. View Form 4L →
Formlabs Form Cure V2 post-curing unit
Form Cure V2
Post-cure to published properties. View Form Cure V2 →
In the Box

Available sizes:

Choose the size in the buy box above.

1 L cartridge (Form 4)5 L for the Formlabs resin pumpBulk: 15% off at 30 L → 45% off at 3,000 L
Compare

Formlabs Tough & Rigid resins compared.

From Formlabs’ published tech specs and data sheets; test conditions differ by resin (see each data sheet).

PropertyTough 1000 ResinTough 1500 Resin V2Tough 2000 Resin V2Rigid 4000 ResinRigid 10K Resin
Comparable toHDPEPolypropyleneABSPEEK / PEKK stiffnessGlass/fiber-filled plastics
Tensile strength26.3 MPa34 MPa40.4 MPa69 MPa88 MPa
Tensile modulus932 MPa1460 MPa1800 MPa4100 MPa11,000 MPa
Elongation at break180%155%79%5.3%—
HDT @ 0.45 MPa55.3 °C66 °C70 °C77 °C238 °C
1 L price$149$149$149$229 (Form 4)$299 (Form 4)

Browse all Formlabs resins or the Formlabs brand page.

Specifications

Formlabs Tough 1500 Resin V2 Technical Data

Compatible Printers
Form 4, Form 4B, Form 4L, Form 4BL
Compatible Tanks
Form 4 Resin Tank, Form 4L Resin Tank
Print Technology
SLA
Category
Impact Resistant
Biocompatibility
Skin contact
Color
Grey
Sizes
1 L cartridge (Form 4) · 5 L for the Formlabs resin pump
Test Basis
Form 4, 100 µm; post-cured in Form Cure V2 for 12 minutes at 70 °C
Ultimate Tensile Strength
34 MPa (4,930 psi)
Tensile Modulus
1,460 MPa (212 ksi)
Elongation at Break
155%
Flexural Strength
41 MPa
Notched / Unnotched Izod
42 J/m / 910 J/m
Gardner Impact @ 1/32″
5.9 J (52 in-lb)
Work of Fracture
1,011 J/m²
Heat Deflection Temp. @ 0.45 MPa
66 °C (151 °F)
SKU
RS-C2-TO15-02 (1 L) / RS-RPS-TO15-02 (5 L)

RESOURCES

Downloads & Technical Support

Everything you need to choose and run Formlabs Tough 1500 Resin V2 with confidence.

Tough 1500 Resin V2 Technical Data
Formlabs-published specifications, compatibility, and what is included.
View specifications →
Resin Print & Post-Processing Guide
Formlabs-recommended wash and post-cure settings and handling for this resin.
Rev1 Technical Support
Application review, sample prints, and post-sales engineering guidance from Rev1 Technologies.

WHY REV1 TECH

Authorized Formlabs Reseller. Resin & SLS Production Specialists.

Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.

YOUR REV1 PARTNER
AUTHORIZED FORMLABS RESELLER
01
Application Engineering
We help you choose the right Formlabs resin for your parts and set up wash and cure.
02
Onboarding & Training
Rev1 handles setup and operator training on PreForm, Dashboard, and the print-to-post workflow.
03
Ongoing Support
Direct access to Rev1’s technical team for resin guidance, troubleshooting, and maintenance.
04
Free Sample Print
Send us your STL. We’ll arrange a Formlabs sample part and ship it to you — or get an instant print quote.
05
In-Person Demo
Visit our Auburn Hills facility or schedule a demo at your site.
06
Consumables & Parts
Genuine Formlabs resins, tanks, build platforms, and post-processing — sourced and supported from the USA.
Buyer FAQ

Formlabs Tough 1500 Resin V2 — questions buyers ask.

How does it compare with polypropylene?
Per Formlabs: 34 MPa tensile strength vs 29.2 MPa, 1,460 MPa vs 1,600 MPa modulus, and 155% vs 125% elongation for extrusion-grade PP.
What changed from V1?
V2 is formulated for the Form 4 Series with 10× higher work of fracture and 3× higher Gardner impact strength.
Can I use it on Form Studio 1?
Not this version — Formlabs offers a separate Tough 1500 resin for Form Studio 1. This one is for Form 4, Form 4B, Form 4L and Form 4BL.
Is it skin-safe?
Formlabs lists Tough 1500 Resin V2 as biocompatible for skin contact.
Are there volume discounts?
Formlabs offers bulk order discounts from 15% at 30 L up to 45% at 3,000 L. Ask Rev1 for volume pricing.
What is it used for?
Formlabs recommends it for prototypes requiring the toughness, compliance and resilience of polypropylene; rugged enclosures with self-tapping screw bosses and snap fits; impact-resistant jigs and fixtures; compliant mechanisms like latches, flexures and dampers.

PRINT WITH GENUINE FORMLABS RESIN

Print with Formlabs Tough 1500 Resin V2

Order Tough 1500 Resin V2, or talk to a Rev1 specialist about the right engineering resin and volume pricing for your parts.

Reply within 1 business day We validate fit — not just take orders Authorized Formlabs reseller in the USA US support & training

Auburn Hills, Michigan's premier source for industrial 3D printers, 3D scanners, materials, and software. Serving engineers and manufacturers across North America.

Products
Company
Contact
Payment methods
AMEXApple PayGoogle PayPayPalShop PayUnionPayVISA
Pay over time

© 2026 Rev1 Technologies. All rights reserved.