Formlabs Tough 1000 Resin HDPE-Like Toughness
A ductile, impact-resistant resin with the strength, stiffness and toughness of HDPE — and exceptional wear and fatigue resistance.
Formlabs Tough 1000 Resin is a ductile, impact-resistant material with strength, stiffness and toughness comparable to high-density polyethylene (HDPE), designed with exceptional wear and fatigue resistance. Its 180% elongation at break and Gardner impact strength surpass HDPE, so parts bend, compress or deform without cracking; hinges and functional parts handle repeated stress with a work of fracture of 3,200 J/m² and Ross flex fatigue of over 100,000 cycles. Compared with Durable Resin it has 5× higher fracture toughness, 2× higher elongation and better temperature, creep and aging resistance. Matte dark grey. Full specifications →
Genuine Formlabs resin from an authorized US reseller — ask Rev1 about bulk discounts (15% at 30 L up to 45% at 3,000 L). Call (248) 707-2950.

Factory-Built Precision. US-Supported by Rev1.
Tough 1000 Resin is built and supported by Formlabs. Rev1 adds workflow and material guidance, onboarding, and US-based support from our Auburn Hills, Michigan team.

Toughness that rivals HDPE.
Applications and properties.
Low-friction moving parts
Lubricity comparable to Delrin (POM) makes Tough 1000 Resin a fit for gears, hinges and sliding assemblies that must not scratch or abrade.
Hinges that keep working
Ross flex fatigue of more than 100,000 cycles lets living hinges and compliant mechanisms flex again and again.
Bends without cracking
180% elongation at break means parts bend, compress or deform under load rather than snapping.
Built for the factory floor
Impact-resistant jigs and fixtures that survive long-term use on the production floor.
Printers and post-processing.
Wash and post-cure to reach the published properties.



Available sizes:
Choose the size in the buy box above.
Formlabs Tough & Rigid resins compared.
From Formlabs’ published tech specs and data sheets; test conditions differ by resin (see each data sheet).
| Property | Tough 1000 Resin | Tough 1500 Resin V2 | Tough 2000 Resin V2 | Rigid 4000 Resin | Rigid 10K Resin |
|---|---|---|---|---|---|
| Comparable to | HDPE | Polypropylene | ABS | PEEK / PEKK stiffness | Glass/fiber-filled plastics |
| Tensile strength | 26.3 MPa | 34 MPa | 40.4 MPa | 69 MPa | 88 MPa |
| Tensile modulus | 932 MPa | 1460 MPa | 1800 MPa | 4100 MPa | 11,000 MPa |
| Elongation at break | 180% | 155% | 79% | 5.3% | — |
| HDT @ 0.45 MPa | 55.3 °C | 66 °C | 70 °C | 77 °C | 238 °C |
| 1 L price | $149 | $149 | $149 | $229 (Form 4) | $299 (Form 4) |
Browse all Formlabs resins or the Formlabs brand page.
Formlabs Tough 1000 Resin Technical Data
RESOURCES
Downloads & Technical Support
Everything you need to choose and run Formlabs Tough 1000 Resin with confidence.
WHY REV1 TECH
Authorized Formlabs Reseller. Resin & SLS Production Specialists.
Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.