PURE SILICONE SLA RESIN • FORMLABS • REV1 TECH

Formlabs Silicone 40A Resin 100% Silicone, 3D Printed

The first accessible 100% silicone 3D printing material — print pure silicone parts in-house, in hours.

Part 3D printed in Formlabs Silicone 40A Resin

Formlabs Silicone 40A Resin is the first accessible 100% silicone 3D printing material, using Formlabs’ patent-pending Pure Silicone Technology™ — pure silicone without added monomer or acrylate. Skip molding and labor-intensive casting and print soft, pliable, durable 40A parts in-house with 230% elongation at break and 12 kN/m tear strength that withstand repeated stretching, flexing and compression, with excellent chemical and thermal resistance from −25 °C to 125 °C and fine features down to 0.3 mm. It is rated for skin contact. Full specifications →

40AShore hardness
230%Elongation at break
12 kN/mTear strength
−25–125 °CThermal stability
Category
ElastomericTemperature ResistantMedicalSkin contact

Genuine Formlabs resin from an authorized US reseller — ask Rev1 about bulk discounts (15% at 30 L up to 45% at 3,000 L). Call (248) 707-2950.

Part 3D printed in Formlabs Silicone 40A Resin
Rev1 Technologies · Authorized Formlabs Partner

Factory-Built Precision. US-Supported by Rev1.

Silicone 40A Resin is built and supported by Formlabs. Rev1 adds workflow and material guidance, onboarding, and US-based support from our Auburn Hills, Michigan team.

Authorized Formlabs Reseller Workflow & Material Guidance US Stock, Parts & Training
Formlabs — official manufacturer of Silicone 40A Resin
FormlabsOfficial Manufacturer
Rev1 Technologies — authorized Formlabs reseller, Auburn Hills MI
Rev1 TechnologiesAuthorized Reseller
Why Choose Silicone 40A Resin

Cast-silicone performance with design freedom.

Outstanding Elastomeric Performance
230% elongation and 12 kN/m tear strength for parts that stretch, flex and compress repeatedly.
Cost-Effective Low Volume
Eliminate tooling and casting for prototypes and small batches of silicone parts.
Design Freedom
Isotropic properties, features as small as 0.3 mm and geometries that molding can’t produce.
Fast and Easy
Produce pure silicone parts in-house in hours on the Formlabs SLA ecosystem.
Features

Applications and properties.

Bellows and parts printed in Formlabs Silicone 40A Resin

Pure silicone parts, no mold

Soft, pliable, durable parts with the properties of cast silicone — printed in hours instead of molded.

100% silicone40A
Watch straps printed in Silicone 40A Resin

Wearables and grippers

Skin-contact-rated silicone for straps, handles and grippers on consumer products.

Skin contact
Automotive assembly with Silicone 40A parts at Dorman

Automotive seals and dampeners

Formlabs customer Dorman uses Silicone 40A Resin for automotive seals, grommets and connectors.

Customer story
Assorted seals and gaskets printed in Silicone 40A Resin

Seals and gaskets

Chemical resistance and thermal stability from −25 °C to 125 °C for seals, gaskets and grommets.

−25 °C to 125 °C
Works With

Printers and post-processing.

Wash and post-cure to reach the published properties.

Formlabs Form 4 resin 3D printer
Form 4
Choose the Form 4 cartridge. View Form 4 →
Formlabs Form 3 laser SLA 3D printer
Form 3
Choose the Form 3 cartridge. View Form 3 →
Formlabs Form Cure V2 post-curing unit
Form Cure V2
Post-cure to published properties. View Form Cure V2 →
In the Box

Available sizes:

Choose the size in the buy box above.

1 L cartridge — Form 41 L cartridge — Form 35 L for the resin pump — Form 3 | Form 4Bulk: 15% off at 30 L → 45% off at 3,000 L
Compare

Formlabs elastomeric resins compared.

From Formlabs’ published tech specs and data sheets.

PropertySilicone 40A ResinFlexible 50A ResinFlexible 80A Resin V2
Material100% siliconeElastomeric photopolymerElastomeric photopolymer
Shore hardness40A55A83A
Elongation at break230%160%230%
Tear strength12 kN/m12.3 kN/m28 kN/m
Comparable toCast siliconeSoft rubbers and silicones80A cast urethanes, TPUs, hard rubbers
1 L price (Form 4)$349$199$199

Browse all Formlabs resins or the Formlabs brand page.

Specifications

Formlabs Silicone 40A Resin Technical Data

Compatible Printers
Form 4, Form 4B, Form 3, Form 3B, Form Studio 1
Compatible Tanks
Form 4 Resin Tank, Form 3 Resin Tank V2.1, Form Studio Resin Tank Pro
Print Technology
SLA
Category
Elastomeric, Temperature Resistant, Specialty, Medical
Biocompatibility
Skin contact
Minimum Layer Thickness
100 microns
Sizes
1 L (Form 4) · 1 L (Form 3) · 5 L for the resin pump (Form 3 | Form 4)
Post-Cure Basis
45 minutes at 60 °C in a beaker of water (per Formlabs data sheet)
Shore Hardness
40A
Ultimate Tensile Strength
5 MPa
Elongation at Break
230%
Tear Strength
12 kN/m
Stress at 100% Elongation
1 MPa
Ross Flexing Fatigue
500,000 cycles
Thermal Stability
−25 °C to 125 °C
Minimum Feature Size
0.3 mm
SKU
RS-C2-SI40-01 (1 L) / RS-F2-SI40-01 (1 L) / RS-RPS-SI40-01 (5 L)

RESOURCES

Downloads & Technical Support

Everything you need to choose and run Formlabs Silicone 40A Resin with confidence.

Silicone 40A Resin Technical Data
Formlabs-published specifications, compatibility, and what is included.
View specifications →
Resin Print & Post-Processing Guide
Formlabs-recommended wash and post-cure settings and handling for this resin.
Rev1 Technical Support
Application review, sample prints, and post-sales engineering guidance from Rev1 Technologies.

WHY REV1 TECH

Authorized Formlabs Reseller. Resin & SLS Production Specialists.

Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.

YOUR REV1 PARTNER
AUTHORIZED FORMLABS RESELLER
01
Application Engineering
We help you choose the right Formlabs resin for your parts and set up wash and cure.
02
Onboarding & Training
Rev1 handles setup and operator training on PreForm, Dashboard, and the print-to-post workflow.
03
Ongoing Support
Direct access to Rev1’s technical team for resin guidance, troubleshooting, and maintenance.
04
Free Sample Print
Send us your STL. We’ll arrange a Formlabs sample part and ship it to you — or get an instant print quote.
05
In-Person Demo
Visit our Auburn Hills facility or schedule a demo at your site.
06
Consumables & Parts
Genuine Formlabs resins, tanks, build platforms, and post-processing — sourced and supported from the USA.
Buyer FAQ

Formlabs Silicone 40A Resin — questions buyers ask.

Is it really 100% silicone?
Yes. Formlabs’ Pure Silicone Technology™ produces pure silicone without added monomer or acrylate.
Which printers can use it?
Form 4, Form 4B, Form 3, Form 3B and Form Studio 1. Formlabs does not list Form 4L or Form 3L.
Is it skin-safe?
Formlabs lists Silicone 40A Resin as biocompatible for skin contact.
Which size do I need?
Choose 1 L for Form 4 or 1 L for Form 3; 5 L is for the Formlabs resin pump.
Are there volume discounts?
Formlabs offers bulk order discounts from 15% at 30 L up to 45% at 3,000 L. Ask Rev1 for volume pricing.
What is it used for?
Formlabs recommends it for seals, gaskets, grommets, connectors and dampeners; customized prosthetics, orthotics, audiology models and medical devices; wearables, handles and grippers; flexible fixtures, masking tools and soft molds.

PRINT WITH GENUINE FORMLABS RESIN

Print with Formlabs Silicone 40A Resin

Order Silicone 40A Resin, or talk to a Rev1 specialist about the right engineering resin and volume pricing for your parts.

Reply within 1 business day We validate fit — not just take orders Authorized Formlabs reseller in the USA US support & training

Auburn Hills, Michigan's premier source for industrial 3D printers, 3D scanners, materials, and software. Serving engineers and manufacturers across North America.

Products
Company
Contact
Payment methods
AMEXApple PayGoogle PayPayPalShop PayUnionPayVISA
Pay over time

© 2026 Rev1 Technologies. All rights reserved.