Formlabs Grey Resin V5 The Versatile Workhorse
An exceptionally versatile General Purpose Resin with a rich matte grey that shows every detail.
Formlabs Grey Resin V5 is an exceptionally versatile General Purpose Resin, offering an optimal balance of fast print speed, high accuracy, presentation-ready appearance, strong mechanical properties, and an easy, reliable workflow. Create parts that are stiff and strong with a surface finish that rivals injection molding; the rich matte grey captures fine features accurately, with xy dimensional tolerances of ±0.15% (lower limit ±0.02 mm). Grey Resin V5 is for the Form 4 generation of printers. Full specifications →
Genuine Formlabs resin from an authorized US reseller — ask Rev1 about bulk discounts (15% at 30 L up to 45% at 3,000 L). Call (248) 707-2950.

Factory-Built Precision. US-Supported by Rev1.
Grey Resin V5 is built and supported by Formlabs. Rev1 adds workflow and material guidance, onboarding, and US-based support from our Auburn Hills, Michigan team.

Fast, accurate, and presentation-ready.
What Grey Resin V5 is built for.
Accurate to ±0.15%
Grey Resin V5 holds xy dimensional tolerances of ±0.15% (lower limit ±0.02 mm), with a matte grey that reveals fine detail.
What’s new in V5
Three times faster on Form 4, 30% higher impact strength, and a darker, richer grey than Grey Resin V4.
Product development at Black Diamond
Grey Resin V5 parts for headlamp prototyping — form, fit and finish in one print.
Jigs and fixtures
Stiff, accurate parts for manufacturing aids and fixtures that hold their dimensions.
Tough, watertight prototypes
Formlabs customer Nudge used Formlabs materials for its Nudge Zero device development.
Properties by post-cure
Post-cured at room temperature for 5 minutes: 54 MPa tensile strength and 15% elongation. At 60 °C for 15 minutes: 62 MPa and 13%, with HDT at 0.45 MPa rising from 62 °C to 71 °C.
For the Form 4 generation.
Form 4, Form 4B, Form 4L and Form 4BL. Wash and post-cure to reach the published properties.



Available sizes:
Choose the size in the buy box above.
Formlabs General Purpose Resins V5 compared.
Post-cured at 60 °C for 15 minutes, per Formlabs’ published tech specs. All $79 per 1 L.
| Property | Black V5 | Grey V5 | White V5 | Clear V5 |
|---|---|---|---|---|
| Finish | Black, matte | Grey, matte | White, matte | Transparent |
| Ultimate tensile strength | 61.0 MPa | 62.0 MPa | 61.0 MPa | 60.0 MPa |
| Tensile modulus | 2700 MPa | 2675 MPa | 2650 MPa | 2750 MPa |
| Elongation at break | 10% | 13% | 11% | 8% |
| Notched Izod | 29 J/m | 32 J/m | 29 J/m | 29 J/m |
| HDT @ 0.45 MPa | 69 °C | 71 °C | 62 °C | 74 °C |
Browse all Formlabs resins or the Formlabs brand page.
Formlabs Grey Resin V5 Technical Data
RESOURCES
Downloads & Technical Support
Everything you need to choose and run Formlabs Grey Resin V5 with confidence.
WHY REV1 TECH
Authorized Formlabs Reseller. Resin & SLS Production Specialists.
Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.