Formlabs Grey Pro Resin Tough, Heat-Resistant Grey
Low creep, higher elongation and toughness than standard resins — for functional prototyping on Form 3.
Formlabs Grey Pro Resin is a tough and heat-resistant material with low creep, increased elongation and improved toughness compared to Formlabs General Purpose Resins. It suits concept modeling, looks-like prototypes and functional prototyping with rigorous hands-on testing. Grey Pro Resin is compatible with Form 2 and Form 3 Series printers; on the Form 4 Series, Formlabs recommends Grey Resin V5 for improved mechanical properties and three times faster print speed. Full specifications →
Genuine Formlabs resin from an authorized US reseller — ask Rev1 about bulk discounts (15% at 30 L up to 45% at 3,000 L). Call (248) 707-2950.

Factory-Built Precision. US-Supported by Rev1.
Grey Pro Resin is built and supported by Formlabs. Rev1 adds workflow and material guidance, onboarding, and US-based support from our Auburn Hills, Michigan team.

Tough enough to test.
Applications and properties.
Form and fit testing
Functional prototypes for rigorous hands-on testing.
Mold masters and tooling
Mold masters for plastics and silicones, and injection-molded product prototypes.
Jigs and fixtures
Jigs and fixtures for manufacturing that hold their shape under load.
On Form 4? Use Grey V5
For Form 4 Series printers Formlabs recommends Grey Resin V5: improved mechanical properties and 3× faster printing.
Printers and post-processing.
Wash and post-cure to reach the published properties.



Available sizes:
Choose the size in the buy box above.
Formlabs Form 3 general purpose resins compared.
From Formlabs’ published tech specs (post-cured).
| Property | Draft V2 | Grey V4.1 | Black V4.1 | White V4.1 | Clear V4.1 | Grey Pro |
|---|---|---|---|---|---|---|
| Look | Smooth grey | Grey, matte | Black, matte | White | Transparent | Grey, matte |
| Tensile strength | 52 MPa | 47 MPa | 48 MPa | 53 MPa | 53 MPa | 61 MPa |
| Elongation at break | 4% | 10% | 12% | 8% | 9% | 13% |
| HDT @ 0.45 MPa | 74 °C | 61 °C | — | 68.2 °C | 65 °C | 78 °C |
| Minimum layer | 100 µm | 25 µm | 25 µm | 50 µm | 25 µm | 50 µm |
| 1 L price (Form 3) | $169 | $169 | $169 | $169 | $169 | $219 |
Browse all Formlabs resins or the Formlabs brand page.
Formlabs Grey Pro Resin Technical Data
RESOURCES
Downloads & Technical Support
Everything you need to choose and run Formlabs Grey Pro Resin with confidence.
WHY REV1 TECH
Authorized Formlabs Reseller. Resin & SLS Production Specialists.
Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.