Formlabs Flexible 80A Resin V2 Cast Urethane Look and Feel
A resilient elastomer that rivals the look, feel and function of 80A cast urethanes, TPUs and hard rubbers.
Formlabs Flexible 80A Resin V2 is a resilient 3D printing elastomer that rivals the look, feel and function of 80A cast urethanes, TPUs and hard rubbers. Parts snap back into place and withstand repeated bending, tension and compression — for tear-resistant functional prototypes and end-use parts, soft inserts and fixtures that protect sensitive components, and padding and grips with tack-free surfaces and a matte black finish. The V2 formulation for Form 4 Series printers delivers 2× higher tear strength, 2× higher elongation at break and 4× higher rebound than the previous version. Full specifications →
Genuine Formlabs resin from an authorized US reseller — ask Rev1 about bulk discounts (15% at 30 L up to 45% at 3,000 L). Call (248) 707-2950.

Factory-Built Precision. US-Supported by Rev1.
Flexible 80A Resin V2 is built and supported by Formlabs. Rev1 adds workflow and material guidance, onboarding, and US-based support from our Auburn Hills, Michigan team.

Rivals 80A cast urethanes.
Applications and properties.
Cast-urethane parts without the mold
Functional prototypes and end-use parts with the look and feel of 80A cast urethane, printed in-house.
Gaskets, seals and soft inserts
Soft inserts and fixtures protect precision components and finished surfaces while withstanding repeated use.
Padding and grips
Tack-free, shock-absorbing grips and padding with a 56% rebound.
Covers that last
5× the flex-fatigue life of the previous generation and 87% elongation retained after 1,000 hours of accelerated aging.
Printers and post-processing.
Wash and post-cure to reach the published properties.



Available sizes:
Choose the size in the buy box above.
Formlabs elastomeric resins compared.
From Formlabs’ published tech specs and data sheets.
| Property | Silicone 40A Resin | Flexible 50A Resin | Flexible 80A Resin V2 |
|---|---|---|---|
| Material | 100% silicone | Elastomeric photopolymer | Elastomeric photopolymer |
| Shore hardness | 40A | 55A | 83A |
| Elongation at break | 230% | 160% | 230% |
| Tear strength | 12 kN/m | 12.3 kN/m | 28 kN/m |
| Comparable to | Cast silicone | Soft rubbers and silicones | 80A cast urethanes, TPUs, hard rubbers |
| 1 L price (Form 4) | $349 | $199 | $199 |
Browse all Formlabs resins or the Formlabs brand page.
Formlabs Flexible 80A Resin V2 Technical Data
RESOURCES
Downloads & Technical Support
Everything you need to choose and run Formlabs Flexible 80A Resin V2 with confidence.
WHY REV1 TECH
Authorized Formlabs Reseller. Resin & SLS Production Specialists.
Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.