FLAME RETARDANT SLA RESIN • FORMLABS • REV1 TECH

Formlabs Flame Retardant Resin UL 94 V-0 Certified

A UL 94 Blue Card-certified resin for self-extinguishing, halogen-free parts with favorable FST ratings.

Part 3D printed in Formlabs Flame Retardant Resin

Formlabs Flame Retardant Resin is a specialty UL 94 Blue Card-certified material for self-extinguishing, halogen-free parts with favorable flame, smoke and toxicity (FST) ratings. Print flame-retardant, heat-resistant, stiff and creep-resistant parts that perform long-term in indoor and industrial environments with high temperatures or ignition sources. Certifications include UL 94 V-0 at 3 mm, FAR 25.853 Appendix F Part I for flammability and ASTM E662 for FST — see the Formlabs Technical Data Sheet for full results. Sold in 0.84 L cartridges for Form 4 and Form 3. Full specifications →

V-0UL 94 at 3 mm
111 °CHDT @ 0.45 MPa
3.1 GPaTensile modulus
Halogen-freeSelf-extinguishing
Category
High StiffnessTemperature ResistantSpecialtyGrey

Genuine Formlabs resin from an authorized US reseller — ask Rev1 about bulk discounts (15% at 30 L up to 45% at 3,000 L). Call (248) 707-2950.

Part 3D printed in Formlabs Flame Retardant Resin
Rev1 Technologies · Authorized Formlabs Partner

Factory-Built Precision. US-Supported by Rev1.

Flame Retardant Resin is built and supported by Formlabs. Rev1 adds workflow and material guidance, onboarding, and US-based support from our Auburn Hills, Michigan team.

Authorized Formlabs Reseller Workflow & Material Guidance US Stock, Parts & Training
Formlabs — official manufacturer of Flame Retardant Resin
FormlabsOfficial Manufacturer
Rev1 Technologies — authorized Formlabs reseller, Auburn Hills MI
Rev1 TechnologiesAuthorized Reseller
Why Choose Flame Retardant Resin

Certified flame retardant parts.

Certified Flame Retardant
UL 94 V-0 and FAR-rated parts that meet certification requirements for hazardous environments.
Heat and Creep Resistant
Long-term performance where temperatures run high or ignition sources are present.
Injection-Molded Look
A surface finish far superior to FDM, with 25 µm XY resolution.
Stiff and Functional
A 2.9–3.1 GPa modulus handles tapping, trimming and drilling.
Features

Applications and properties.

Connector housings printed in Formlabs Flame Retardant Resin

Electronics housings and connectors

Protective and internal components for consumer and medical electronics.

Electronics
Wired connector parts printed in Flame Retardant Resin

Self-extinguishing, halogen-free

UL 94 V-0 at 3 mm thickness, with favorable flame, smoke and toxicity ratings (ASTM E662).

UL 94 V-0ASTM E662
Race Up student formula car on track

Motorsport at Race Up

Formlabs customer team Race Up prints flame-retardant parts for its formula car.

Customer story
Housings printed in Flame Retardant Resin

Vehicle interior parts

FAR 25.853-rated parts for interiors of airplanes, automobiles and railways, with an excellent surface finish.

FAR 25.853
Works With

Printers and post-processing.

Wash and post-cure to reach the published properties.

Formlabs Form 4 resin 3D printer
Form 4
Choose the Form 4 cartridge. View Form 4 →
Formlabs Form 3 laser SLA 3D printer
Form 3
Choose the Form 3 cartridge. View Form 3 →
Formlabs Form Cure V2 post-curing unit
Form Cure V2
Post-cure to published properties. View Form Cure V2 →
In the Box

Available sizes:

Choose the size in the buy box above.

0.84 L cartridge — Form 40.84 L cartridge — Form 3Bulk: 15% off at 30 L → 45% off at 3,000 L
Compare

Formlabs specialty resins compared.

From Formlabs’ published tech specs.

PropertyHigh Temp ResinFlame Retardant ResinESD Resin
Defining propertyHDT 238 °C @ 0.45 MPaUL 94 V-0 (3 mm), FAR 25.853Static-dissipative, 10⁵–10⁸ Ω/sq
Tensile strength49 MPa41 MPa44.2 MPa
Tensile modulus2,800 MPa3,100 MPa1,937 MPa
Elongation at break2.3%7.1%12%
ColorTranslucentGreyBlack
Entry size / price1 L (Form 4) $1990.84 L (Form 4) $2491 L (Form 4) $229

Browse all Formlabs resins or the Formlabs brand page.

Specifications

Formlabs Flame Retardant Resin Technical Data

Compatible Printers
Form 4, Form 4B, Form 4L, Form 4BL, Form 3, Form 3L, Form 3B, Form 3BL, Form Studio 1
Compatible Tanks
Form 4 / Form 4L Resin Tank, Form 3 Resin Tank V2.1, Form 3L Resin Tank V3, Form Studio Resin Tank Pro
Print Technology
SLA
Category
High Stiffness, Temperature Resistant, Specialty
Color
Grey
Minimum Layer Thickness
50 microns
Certifications
UL 94 V-0 (3 mm), UL 94 Blue Card, FAR 25.853 App. F Part I, ASTM E662
Sizes
0.84 L cartridge — Form 4 · 0.84 L cartridge — Form 3
Ultimate Tensile Strength
41 MPa
Tensile Modulus
3,100 MPa
Flexural Strength / Modulus
75 MPa / 2,700 MPa
Notched / Unnotched Izod
22 J/m / 257 J/m
Elongation at Break
7.1%
Heat Deflection Temp. @ 1.8 / 0.45 MPa
83 °C / 111 °C
Thermal Expansion
68.1 µm/m/°C
Post-Cure Basis
80 °C for 120 minutes
SKU
RS-C2-FRGR-01 (0.84 L) / RS-F2-FRGR-01 (0.84 L)

RESOURCES

Downloads & Technical Support

Everything you need to choose and run Formlabs Flame Retardant Resin with confidence.

Flame Retardant Resin Technical Data
Formlabs-published specifications, compatibility, and what is included.
View specifications →
Resin Print & Post-Processing Guide
Formlabs-recommended wash and post-cure settings and handling for this resin.
Rev1 Technical Support
Application review, sample prints, and post-sales engineering guidance from Rev1 Technologies.

WHY REV1 TECH

Authorized Formlabs Reseller. Resin & SLS Production Specialists.

Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.

YOUR REV1 PARTNER
AUTHORIZED FORMLABS RESELLER
01
Application Engineering
We help you choose the right Formlabs resin for your parts and set up wash and cure.
02
Onboarding & Training
Rev1 handles setup and operator training on PreForm, Dashboard, and the print-to-post workflow.
03
Ongoing Support
Direct access to Rev1’s technical team for resin guidance, troubleshooting, and maintenance.
04
Free Sample Print
Send us your STL. We’ll arrange a Formlabs sample part and ship it to you — or get an instant print quote.
05
In-Person Demo
Visit our Auburn Hills facility or schedule a demo at your site.
06
Consumables & Parts
Genuine Formlabs resins, tanks, build platforms, and post-processing — sourced and supported from the USA.
Buyer FAQ

Formlabs Flame Retardant Resin — questions buyers ask.

What certifications does it have?
UL 94 V-0 at 3 mm and UL 94 Blue Card, FAR 25.853 Appendix F Part I for flammability, and ASTM E662 for smoke. Full results are in the Formlabs Technical Data Sheet.
Why 0.84 L?
Formlabs sells Flame Retardant Resin in 0.84 L cartridges, for Form 4 or Form 3.
Can parts be machined?
Yes — a 2.9–3.1 GPa modulus handles tapping, trimming and drilling.
Which printers can use it?
Form 4, Form 4B, Form 4L, Form 4BL, Form 3, Form 3L, Form 3B, Form 3BL, Form Studio 1.
Are there volume discounts?
Formlabs offers bulk order discounts from 15% at 30 L up to 45% at 3,000 L. Ask Rev1 for volume pricing.
What is it used for?
Formlabs recommends it for interior parts in airplanes, automobiles and railways; custom jigs, fixtures and replacement parts for hot or ignition-prone environments; protective and internal electronics components.

PRINT WITH GENUINE FORMLABS RESIN

Print with Formlabs Flame Retardant Resin

Order Flame Retardant Resin, or talk to a Rev1 specialist about the right engineering resin and volume pricing for your parts.

Reply within 1 business day We validate fit — not just take orders Authorized Formlabs reseller in the USA US support & training

Auburn Hills, Michigan's premier source for industrial 3D printers, 3D scanners, materials, and software. Serving engineers and manufacturers across North America.

Products
Company
Contact
Payment methods
AMEXApple PayGoogle PayPayPalShop PayUnionPayVISA
Pay over time

© 2026 Rev1 Technologies. All rights reserved.