FAST GENERAL PURPOSE RESIN • FORMLABS • REV1 TECH

Formlabs Fast Model Resin Formlabs’ Fastest Resin

Print over 100 mm/h on Form 4 — a fully packed build in about two hours, post-processed in ten minutes.

Part 3D printed in Formlabs Fast Model Resin

Formlabs Fast Model Resin is a fast-printing general purpose resin that prints at over 100 mm/h on Form 4 and 80 mm/h on Form 4L — dozens of small parts in minutes or large prototypes in under two hours. Post-processing is just as quick: a 5-minute wash and a 5-minute room-temperature post-cure. It is the next generation of Draft Resin, three times faster, more opaque and matte, and 45% stronger and stiffer. Matte grey, with extremely low odor. For Form Studio 1, Formlabs offers Alpha Fast Resin. Full specifications →

100+ mm/hOn Form 4
~2 hFull Form 4 build
5 + 5 minWash + room-temp cure
62 MPaTensile strength
Category
General PurposeDentalMatte grey

Genuine Formlabs resin from an authorized US reseller — ask Rev1 about bulk discounts (15% at 30 L up to 45% at 3,000 L). Call (248) 707-2950.

Part 3D printed in Formlabs Fast Model Resin
Rev1 Technologies · Authorized Formlabs Partner

Factory-Built Precision. US-Supported by Rev1.

Fast Model Resin is built and supported by Formlabs. Rev1 adds workflow and material guidance, onboarding, and US-based support from our Auburn Hills, Michigan team.

Authorized Formlabs Reseller Workflow & Material Guidance US Stock, Parts & Training
Formlabs — official manufacturer of Fast Model Resin
FormlabsOfficial Manufacturer
Rev1 Technologies — authorized Formlabs reseller, Auburn Hills MI
Rev1 TechnologiesAuthorized Reseller
Why Choose Fast Model Resin

Parts as fast as you can design them.

Fastest Formlabs Resin
Print a fully packed Form 4 build in about 2 hours.
Fast Post-Processing
A 5-minute wash and a 5-minute room-temperature post-cure.
Presentation-Ready
Matte grey color and a smooth surface finish.
Extremely Low Odor
Ultra-low volatile organic compounds (VOCs) for comfortable printing.
Features

Applications and properties.

Parts printed in Formlabs Fast Model Resin

Rapid design iterations

Print, check and reprint in the same afternoon — ideal for early shape-and-feel prototypes.

Iterate fast
Fast Model Resin part beside a Draft Resin part

The next generation of Draft Resin

Compared with Draft Resin V2: three times faster on Form 4, more opaque and matte, and 45% higher strength and modulus.

3× faster+45% strength
Full Form 4 build platform of Fast Model Resin parts

A full build in about two hours

Fast Model Resin prints a full Form 4 build volume in under two hours for high-throughput work.

~2 h full build
Engineer holding a large prototype printed on Form 4L

Large models, quickly

80 mm/h on Form 4L turns large prototypes around in hours instead of days.

80 mm/h on Form 4L
Works With

Printers and post-processing.

Wash and post-cure to reach the published properties.

Formlabs Form 4 resin 3D printer
Form 4
1 L cartridges load straight in. View Form 4 →
Formlabs Form 4L large-format resin 3D printer
Form 4L
Large-format builds. View Form 4L →
Formlabs Form Cure V2 post-curing unit
Form Cure V2
Post-cure to published properties. View Form Cure V2 →
In the Box

Available sizes:

Choose the size in the buy box above.

1 L cartridge (Form 4)5 L for the Formlabs resin pumpBulk: 15% off at 30 L → 45% off at 3,000 L
Compare

Formlabs model resins compared.

From Formlabs’ published tech specs (post-cured).

PropertyFast ModelGrey V5Precision Model
Best forSpeed — fastest Formlabs resinAll-round general purposeDental restorative models
Tensile strength62 MPa62 MPa50 MPa
Tensile modulus2,670 MPa2,675 MPa2,200 MPa
Elongation at break11%13%8.6%
HDT @ 0.45 MPa76 °C71 °C53.5 °C
PrintersForm 4 generation, Form Studio 1Form 4 generationForm 4B, Form 4BL
1 L price$79$79$99

Browse all Formlabs resins or the Formlabs brand page.

Specifications

Formlabs Fast Model Resin Technical Data

Compatible Printers
Form 4, Form 4B, Form 4L, Form 4BL, Form Studio 1
Compatible Tanks
Form 4 Resin Tank, Form 4L Resin Tank, Form Studio Resin Tank Pro
Print Technology
SLA
Category
General Purpose, Dental
Color
Grey, matte
Minimum Layer Thickness
100 microns
Sizes
1 L cartridge (Form 4) · 5 L for the Formlabs resin pump
Ultimate Tensile Strength
62 MPa (55 MPa room-temp cure)
Tensile Modulus
2,670 MPa
Flexural Strength / Modulus
106 MPa / 2,740 MPa
Notched Izod
37 J/m
Elongation at Break
11%
Heat Deflection Temp. @ 1.8 / 0.45 MPa
61 °C / 76 °C
Post-Cure Basis
60 °C for 15 minutes (or 5 minutes at room temperature)
SKU
RS-C2-FMGR-01 (1 L) / RS-RPS-FMGR-01 (5 L)

RESOURCES

Downloads & Technical Support

Everything you need to choose and run Formlabs Fast Model Resin with confidence.

Fast Model Resin Technical Data
Formlabs-published specifications, compatibility, and what is included.
View specifications →
Resin Print & Post-Processing Guide
Formlabs-recommended wash and post-cure settings and handling for this resin.
Rev1 Technical Support
Application review, sample prints, and post-sales engineering guidance from Rev1 Technologies.

WHY REV1 TECH

Authorized Formlabs Reseller. Resin & SLS Production Specialists.

Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.

YOUR REV1 PARTNER
AUTHORIZED FORMLABS RESELLER
01
Application Engineering
We help you choose the right Formlabs resin for your parts and set up wash and cure.
02
Onboarding & Training
Rev1 handles setup and operator training on PreForm, Dashboard, and the print-to-post workflow.
03
Ongoing Support
Direct access to Rev1’s technical team for resin guidance, troubleshooting, and maintenance.
04
Free Sample Print
Send us your STL. We’ll arrange a Formlabs sample part and ship it to you — or get an instant print quote.
05
In-Person Demo
Visit our Auburn Hills facility or schedule a demo at your site.
06
Consumables & Parts
Genuine Formlabs resins, tanks, build platforms, and post-processing — sourced and supported from the USA.
Buyer FAQ

Formlabs Fast Model Resin — questions buyers ask.

How fast is it?
Over 100 mm/h on Form 4 and 80 mm/h on Form 4L — a fully packed Form 4 build in about two hours, per Formlabs.
Does it need a long post-cure?
No: a 5-minute wash and 5-minute room-temperature post-cure. A 60 °C, 15-minute cure gives the highest properties.
How is it different from Draft Resin?
It is the next generation of Draft Resin: three times faster on Form 4, more opaque and matte, and 45% stronger and stiffer.
Which printers can use it?
Form 4, Form 4B, Form 4L, Form 4BL and Form Studio 1. Formlabs also offers Alpha Fast Resin for Form Studio 1.
Are there volume discounts?
Formlabs offers bulk order discounts from 15% at 30 L up to 45% at 3,000 L. Ask Rev1 for volume pricing.
What is it used for?
Formlabs recommends it for initial prototypes for shape and feel; large models that print quickly; rapid design iterations.

PRINT WITH GENUINE FORMLABS RESIN

Print with Formlabs Fast Model Resin

Order Fast Model Resin, or talk to a Rev1 specialist about the right engineering resin and volume pricing for your parts.

Reply within 1 business day We validate fit — not just take orders Authorized Formlabs reseller in the USA US support & training

Auburn Hills, Michigan's premier source for industrial 3D printers, 3D scanners, materials, and software. Serving engineers and manufacturers across North America.

Products
Company
Contact
Payment methods
AMEXApple PayGoogle PayPayPalShop PayUnionPayVISA
Pay over time

© 2026 Rev1 Technologies. All rights reserved.