Formlabs Draft Resin V2 Up to 4× Faster on Form 3
Print initial prototypes and rapid iterations up to four times faster than General Purpose Resins.
Formlabs Draft Resin V2 prints up to four times faster than Formlabs General Purpose Resins on Form 3 Series printers, making it ideal for initial prototypes and rapid iterations. Parts have a smooth grey finish and high accuracy: use 200-micron settings for speed or 100-micron settings for finer detail. The V2 reformulation reduced layer thickness by 33% and reduced support touchpoints and wash and cure times. For Form 4 Series printers, use Fast Model Resin; on Form Studio 1, Alpha Fast Resin. Full specifications →
Genuine Formlabs resin from an authorized US reseller — ask Rev1 about bulk discounts (15% at 30 L up to 45% at 3,000 L). Call (248) 707-2950.

Factory-Built Precision. US-Supported by Rev1.
Draft Resin V2 is built and supported by Formlabs. Rev1 adds workflow and material guidance, onboarding, and US-based support from our Auburn Hills, Michigan team.

Iterate in a day.
Applications and properties.
Initial prototypes
Check form and fit early with fast, accurate grey parts.
Rapid design iterations
Test multiple designs in a day.
High-throughput parts
Fill a Form 3L build platform and still print quickly.
On Form 4? Use Fast Model
Fast Model Resin is the next generation of Draft Resin: 3× faster on Form 4, more opaque and matte, 45% stronger.
Printers and post-processing.
Wash and post-cure to reach the published properties.



Available sizes:
Choose the size in the buy box above.
Formlabs Form 3 general purpose resins compared.
From Formlabs’ published tech specs (post-cured).
| Property | Draft V2 | Grey V4.1 | Black V4.1 | White V4.1 | Clear V4.1 | Grey Pro |
|---|---|---|---|---|---|---|
| Look | Smooth grey | Grey, matte | Black, matte | White | Transparent | Grey, matte |
| Tensile strength | 52 MPa | 47 MPa | 48 MPa | 53 MPa | 53 MPa | 61 MPa |
| Elongation at break | 4% | 10% | 12% | 8% | 9% | 13% |
| HDT @ 0.45 MPa | 74 °C | 61 °C | — | 68.2 °C | 65 °C | 78 °C |
| Minimum layer | 100 µm | 25 µm | 25 µm | 50 µm | 25 µm | 50 µm |
| 1 L price (Form 3) | $169 | $169 | $169 | $169 | $169 | $219 |
Browse all Formlabs resins or the Formlabs brand page.
Formlabs Draft Resin V2 Technical Data
RESOURCES
Downloads & Technical Support
Everything you need to choose and run Formlabs Draft Resin V2 with confidence.
WHY REV1 TECH
Authorized Formlabs Reseller. Resin & SLS Production Specialists.
Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.