CASTABLE JEWELRY RESIN • FORMLABS • REV1 TECH

Formlabs Castable Wax Resin Ultrafine Jewelry Casting

A 20% wax-filled resin with zero ash and clean burnout for ultrafine jewelry patterns.

Part 3D printed in Formlabs Castable Wax Resin

Formlabs Castable Wax Resin is a 20% wax-filled material for casting that captures intricate features with a smooth surface finish, for accurate castings with zero ash content and clean burnout. High strength and stiffness let it print ultrafine structures, and high green strength keeps thin patterns such as wire filigree in shape. Printed parts are strong enough to handle with no post-cure required, so they are ready to use right away. Purple; 25-micron minimum layer thickness. Full specifications →

20%Wax-filled
0.0–0.1%Ash content
No post-cureReady after drying
25 µmMin. layer height
Category
CastingDentalPurple

Genuine Formlabs resin from an authorized US reseller — ask Rev1 about bulk discounts (15% at 30 L up to 45% at 3,000 L). Call (248) 707-2950.

Part 3D printed in Formlabs Castable Wax Resin
Rev1 Technologies · Authorized Formlabs Partner

Factory-Built Precision. US-Supported by Rev1.

Castable Wax Resin is built and supported by Formlabs. Rev1 adds workflow and material guidance, onboarding, and US-based support from our Auburn Hills, Michigan team.

Authorized Formlabs Reseller Workflow & Material Guidance US Stock, Parts & Training
Formlabs — official manufacturer of Castable Wax Resin
FormlabsOfficial Manufacturer
Rev1 Technologies — authorized Formlabs reseller, Auburn Hills MI
Rev1 TechnologiesAuthorized Reseller
Why Choose Castable Wax Resin

Clean, reliable casting.

Clean, Reliable Casting
Contains 20% wax with zero ash content and clean burnout.
Faster, Simpler Workflow
Parts are strong enough to handle with no post-cure required.
Smooth, Refined Surfaces
Light-touch support tips remove easily without dimpling the part.
High Green Strength
Shape retention for thin patterns such as wire filigree.
Features

Applications and properties.

Printed ring pattern beside the cast silver ring

From print to casting

Print the pattern in Castable Wax Resin, invest it, and cast directly — no molded wax required.

Direct casting
Filigree bangle printed in Castable Wax Resin

Delicate filigree

High green strength keeps ultrafine structures like wire filigree in shape.

Ultrafine detail
Castable Wax Resin pattern with light-touch supports

Light-touch supports

Support tips remove easily and leave no dimples on the finished pattern.

Clean surfaces
Printed patterns and cast metal jewelry

Zero ash, clean burnout

0.0–0.1% ash content (TGA) and 5% mass loss at 249 °C for a clean, predictable burnout.

0.0–0.1% ash
Works With

Printers and post-processing.

Wash and post-cure to reach the published properties.

Formlabs Form 4 resin 3D printer
Form 4
Choose the 1 L Form 4 cartridge. View Form 4 →
Formlabs Form 3 laser SLA 3D printer
Form 3
Choose the 1 L Form 3 cartridge. View Form 3 →
Formlabs Form Wash V2 part washer
Form Wash V2
Wash, then dry before casting. View Form Wash V2 →
In the Box

Available sizes:

Choose the size in the buy box above.

1 L cartridge — Form 41 L cartridge — Form 3Bulk: 15% off at 30 L → 45% off at 3,000 L
Compare

Formlabs casting resins compared.

From Formlabs’ published tech specs and data sheets.

PropertyCastable Wax ResinTrue Cast ResinClear Cast Resin
Best forUltrafine jewelry, filigreeJewelry to engineering parts up to 5 mm thickLarger patterns, geometries thicker than 3 mm
Composition20% wax-filledWax-filledClear photopolymer, latticed patterns
Ash content0.0–0.1%0.03%< 0.20%
Post-cureNot requiredPer Formlabs settingsRequired
PrintersForm 4 & Form 3 generations, Form 2, Form Studio 1Form 4, Form 4B, Form Studio 1Form 4 & Form 3 generations, Form 2, Form Studio 1
1 L price (Form 4)$299$199$149

Browse all Formlabs resins or the Formlabs brand page.

Specifications

Formlabs Castable Wax Resin Technical Data

Compatible Printers
Form 4, Form 4B, Form 4L, Form 4BL, Form 3, Form 3L, Form 3B, Form 2, Form Studio 1
Compatible Tanks
Form 4 Resin Tank, Form 3 Resin Tank V2.1, Form 3L Resin Tank V3, Form 2 Resin / LT Tank, Form Studio Resin Tank Pro
Print Technology
SLA
Category
Casting, Dental
Color
Purple
Minimum Layer Thickness
25 microns
Post-Cure
Not required — let parts dry fully before casting
Sizes
1 L cartridge — Form 4 · 1 L cartridge — Form 3
Wax Content
20%
Ash Content (TGA)
0.0–0.1%
Temp @ 5% Mass Loss
249 °C
Ultimate Tensile Strength
12 MPa (green)
Tensile Modulus
220 MPa (green)
Elongation
13%
SKU
RS-C2-CWPU-01 (1 L) / RS-F2-CWPU-01 (1 L)

RESOURCES

Downloads & Technical Support

Everything you need to choose and run Formlabs Castable Wax Resin with confidence.

Castable Wax Resin Technical Data
Formlabs-published specifications, compatibility, and what is included.
View specifications →
Resin Print & Post-Processing Guide
Formlabs-recommended wash and post-cure settings and handling for this resin.
Rev1 Technical Support
Application review, sample prints, and post-sales engineering guidance from Rev1 Technologies.

WHY REV1 TECH

Authorized Formlabs Reseller. Resin & SLS Production Specialists.

Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.

YOUR REV1 PARTNER
AUTHORIZED FORMLABS RESELLER
01
Application Engineering
We help you choose the right Formlabs resin for your parts and set up wash and cure.
02
Onboarding & Training
Rev1 handles setup and operator training on PreForm, Dashboard, and the print-to-post workflow.
03
Ongoing Support
Direct access to Rev1’s technical team for resin guidance, troubleshooting, and maintenance.
04
Free Sample Print
Send us your STL. We’ll arrange a Formlabs sample part and ship it to you — or get an instant print quote.
05
In-Person Demo
Visit our Auburn Hills facility or schedule a demo at your site.
06
Consumables & Parts
Genuine Formlabs resins, tanks, build platforms, and post-processing — sourced and supported from the USA.
Buyer FAQ

Formlabs Castable Wax Resin — questions buyers ask.

Do I need to post-cure it?
No. Castable Wax Resin does not require post-curing — let parts dry fully before casting.
What is the ash content?
0.0–0.1% by TGA, for a clean burnout.
Which size do I need?
Formlabs sells 1 L cartridges for Form 4 or Form 3 — choose the one that matches your printer.
Which printers can use it?
Form 4, Form 4B, Form 4L, Form 4BL, Form 3, Form 3L, Form 3B, Form 2 and Form Studio 1.
Are there volume discounts?
Formlabs offers bulk order discounts from 15% at 30 L up to 45% at 3,000 L. Ask Rev1 for volume pricing.
What is it used for?
Formlabs recommends it for direct investment casting; custom try-ons; delicate filigree designs; thin pieces with fine details.

PRINT WITH GENUINE FORMLABS RESIN

Print with Formlabs Castable Wax Resin

Order Castable Wax Resin, or talk to a Rev1 specialist about the right engineering resin and volume pricing for your parts.

Reply within 1 business day We validate fit — not just take orders Authorized Formlabs reseller in the USA US support & training

Auburn Hills, Michigan's premier source for industrial 3D printers, 3D scanners, materials, and software. Serving engineers and manufacturers across North America.

Products
Company
Contact
Payment methods
AMEXApple PayGoogle PayPayPalShop PayUnionPayVISA
Pay over time

© 2026 Rev1 Technologies. All rights reserved.