BIOCOMPATIBLE MEDICAL RESIN • FORMLABS • REV1 TECH

Formlabs BioMed Amber Resin Strong, Stiff, Biocompatible

Strong, stiff, translucent parts for long-term skin and short-term bone, tissue, dentin and mucosal contact.

Part 3D printed in Formlabs BioMed Amber Resin

Formlabs BioMed Amber Resin is a strong, stiff material for biocompatible applications requiring long-term skin (>30 days) or short-term bone, tissue, dentin and mucosal membrane contact (<24 hours). Parts are compatible with common solvent disinfection and sterilization methods, and the material is manufactured in Formlabs’ FDA-registered, ISO 13485-certified facility. Formlabs provides no intended uses for BioMed Resins: the device manufacturer and its customers are responsible for determining the biocompatibility and performance of printed parts for their application. Full specifications →

73 MPaTensile strength
67DShore hardness
>30 daysSkin contact
ISO 13485Manufacturing
Category
MedicalTranslucent amber

Genuine Formlabs resin from an authorized US reseller — ask Rev1 about bulk discounts (15% at 30 L up to 45% at 3,000 L). Call (248) 707-2950.

Part 3D printed in Formlabs BioMed Amber Resin
Rev1 Technologies · Authorized Formlabs Partner

Factory-Built Precision. US-Supported by Rev1.

BioMed Amber Resin is built and supported by Formlabs. Rev1 adds workflow and material guidance, onboarding, and US-based support from our Auburn Hills, Michigan team.

Authorized Formlabs Reseller Workflow & Material Guidance US Stock, Parts & Training
Formlabs — official manufacturer of BioMed Amber Resin
FormlabsOfficial Manufacturer
Rev1 Technologies — authorized Formlabs reseller, Auburn Hills MI
Rev1 TechnologiesAuthorized Reseller
Why Choose BioMed Amber Resin

Medical-grade, rigid and translucent.

Medical-Grade Material
Manufactured within Formlabs’ Quality Management System, with strict adherence to ISO 13485.
Biocompatible and Sterilizable
Formlabs tests common use cases for biocompatibility and sterilization compatibility.
Semi-Transparent
Visibility through parts lets light pass through.
ISO 13485 Facility
Manufactured in Formlabs’ FDA-registered, ISO 13485-certified facility in Ohio, in an ISO Class 8 clean room.
Features

Applications and properties.

Surgical guides in BioMed Amber Resin on white bone models

Cut and drill guides

Rigid, translucent guides for point-of-care and medical manufacturing applications requiring biocompatibility.

Guides
Anatomical models printed in BioMed Amber Resin

Implant sizing models

Translucent models for visualization and implant sizing.

Sizing models
Medical device components printed in BioMed Amber Resin

End-use medical devices

Strong, stiff parts and assemblies with complex designs and geometries.

End-use parts
Specimen collection component printed in BioMed resin

Specimen collection kits

Formlabs lists specimen collection kits among BioMed Amber applications.

Specimen kits
Works With

Printers and post-processing.

Wash and post-cure to reach the published properties.

Formlabs Form 4B dental and medical 3D printer
Form 4B
Medical and dental printing. View Form 4B →
Formlabs Form 4BL large-format medical 3D printer
Form 4BL
Large-format medical builds. View Form 4BL →
Formlabs Form Cure V2 post-curing unit
Form Cure V2
Post-cure per the material’s manufacturing guide. View Form Cure V2 →
In the Box

Available sizes:

Choose the size in the buy box above.

1 L cartridge — Form 41 L cartridge — Form 35 L for the resin pump — Form 3 | Form 4Bulk: 15% off at 30 L → 45% off at 3,000 L
Compare

Formlabs BioMed rigid resins compared.

From Formlabs’ published tech specs (post-cured). Contact durations as listed by Formlabs.

PropertyBioMed AmberBioMed BlackBioMed ClearBioMed WhiteBioMed Durable
LookTranslucent amberBlack, matteTransparentWhite, opaqueTransparent
Tensile strength73 MPa36 MPa52 MPa46 MPa29.1 MPa
Elongation at break12%14%12%10%33%
Notched Izod28 J/m25 J/m35 J/m15 J/m98 J/m
Shore hardness67D77D78D80D75D
USP Class VI—YesYesYesYes
1 L price (Form 4)$249$249$349$279$429

Browse all Formlabs resins or the Formlabs brand page.

Specifications

Formlabs BioMed Amber Resin Technical Data

Compatible Printers
Form 4B, Form 4BL, Form 3B, Form 3BL, Form 2
Compatible Tanks
Form 4 Resin Tank, Form 4L Resin Tank, Form 3 Resin Tank V2.1, Form 3L Resin Tank V3, Form 2 LT Tank
Print Technology
SLA
Biocompatibility
Skin contact, mucosal membrane contact
Color
Translucent
Minimum Layer Thickness
50 microns
Sizes
1 L cartridge — Form 4 · 1 L cartridge — Form 3 · 5 L for the resin pump — Form 3 | Form 4
Ultimate Tensile Strength
73 MPa
Young’s Modulus
2,900 MPa
Elongation
12%
Flexural Strength / Modulus
103 MPa / 2,500 MPa
Shore Hardness
67D
Notched / Unnotched Izod
28 J/m / 142 J/m
Heat Deflection Temp. @ 1.8 / 0.45 MPa
65 °C / 78 °C
SKU
RS-C2-BMAM-01 (1 L) / RS-F2-BMAM-01 (1 L) / RS-RPS-BMAM-01 (5 L)

RESOURCES

Downloads & Technical Support

Everything you need to choose and run Formlabs BioMed Amber Resin with confidence.

BioMed Amber Resin Technical Data
Formlabs-published specifications, compatibility, and what is included.
View specifications →
Resin Print & Post-Processing Guide
Formlabs-recommended wash and post-cure settings and handling for this resin.
Rev1 Technical Support
Application review, sample prints, and post-sales engineering guidance from Rev1 Technologies.

WHY REV1 TECH

Authorized Formlabs Reseller. Resin & SLS Production Specialists.

Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.

YOUR REV1 PARTNER
AUTHORIZED FORMLABS RESELLER
01
Application Engineering
We help you choose the right Formlabs resin for your parts and set up wash and cure.
02
Onboarding & Training
Rev1 handles setup and operator training on PreForm, Dashboard, and the print-to-post workflow.
03
Ongoing Support
Direct access to Rev1’s technical team for resin guidance, troubleshooting, and maintenance.
04
Free Sample Print
Send us your STL. We’ll arrange a Formlabs sample part and ship it to you — or get an instant print quote.
05
In-Person Demo
Visit our Auburn Hills facility or schedule a demo at your site.
06
Consumables & Parts
Genuine Formlabs resins, tanks, build platforms, and post-processing — sourced and supported from the USA.
Buyer FAQ

Formlabs BioMed Amber Resin — questions buyers ask.

What contact can it be used for?
Long-term skin contact (>30 days) or short-term bone, tissue, dentin and mucosal membrane contact (<24 hours), per Formlabs’ testing.
Can parts be sterilized?
Yes — parts are compatible with common solvent disinfection and sterilization methods.
Which printers can use it?
Form 4B, Form 4BL, Form 3B, Form 3BL, Form 2. Choose the 1 L cartridge for your printer generation, or 5 L for the resin pump.
Is it approved for my device?
Formlabs tests biocompatibility and sterilization compatibility for common use cases, but provides no intended uses for BioMed Resins. The manufacturer of the finished device is responsible for validating biocompatibility and performance; Formlabs publishes the supporting documentation, including the TDS, SDS and certificates of analysis.
Are there volume discounts?
Formlabs offers bulk order discounts from 15% at 30 L up to 45% at 3,000 L. Ask Rev1 for volume pricing.
What is it used for?
Formlabs lists representative customer applications including end-use medical devices; cut and drill guides; implant sizing models; specimen collection kits. It gives no intended uses for BioMed Resins.

PRINT WITH GENUINE FORMLABS RESIN

Print with Formlabs BioMed Amber Resin

Order BioMed Amber Resin, or talk to a Rev1 specialist about the Form 4B workflow and volume pricing for medical parts.

Reply within 1 business day We validate fit — not just take orders Authorized Formlabs reseller in the USA US support & training

Auburn Hills, Michigan's premier source for industrial 3D printers, 3D scanners, materials, and software. Serving engineers and manufacturers across North America.

Products
Company
Contact
Payment methods
AMEXApple PayGoogle PayPayPalShop PayUnionPayVISA
Pay over time

© 2026 Rev1 Technologies. All rights reserved.