TECHNICAL CERAMIC RESIN • FORMLABS • REV1 TECH

Formlabs Alumina 4N Resin 99.99% Pure Alumina Parts

High-density, high-purity technical ceramic parts for extreme heat, wear, chemicals and voltage.

Part 3D printed in Formlabs Alumina 4N Resin

Formlabs Alumina 4N Resin brings technical ceramic to the Formlabs SLA ecosystem — which Formlabs calls the most affordable ceramic 3D printing ecosystem in the world. It produces 99.99% pure alumina parts with 98.6% relative density that are thermally resistant, hard, abrasion-resistant, mechanically strong and chemically inert, with a maximum working temperature of 1,500 °C and flexural strength over 400 MPa — comparable to traditionally manufactured alumina, without expensive tooling. Parts require a wash in Ceramic Wash Solution. Shelf life is 3 months at room temperature, extendable by up to 12 months refrigerated (−25 to 4 °C). Full specifications →

99.99%Alumina purity
98.6%Relative density
1,500 °CMax working temp
> 400 MPaFlexural strength
Category
High StiffnessTemperature ResistantSpecialtyWhite

Genuine Formlabs resin from an authorized US reseller — ask Rev1 about bulk discounts (15% at 30 L up to 45% at 3,000 L). Call (248) 707-2950.

Part 3D printed in Formlabs Alumina 4N Resin
Rev1 Technologies · Authorized Formlabs Partner

Factory-Built Precision. US-Supported by Rev1.

Alumina 4N Resin is built and supported by Formlabs. Rev1 adds workflow and material guidance, onboarding, and US-based support from our Auburn Hills, Michigan team.

Authorized Formlabs Reseller Workflow & Material Guidance US Stock, Parts & Training
Formlabs — official manufacturer of Alumina 4N Resin
FormlabsOfficial Manufacturer
Rev1 Technologies — authorized Formlabs reseller, Auburn Hills MI
Rev1 TechnologiesAuthorized Reseller
Why Choose Alumina 4N Resin

Ceramic 3D printing made accessible.

Accessible Ceramics
Over 10× lower starting price than leading ceramic alternatives, per Formlabs.
Design Freedom
Internal channels, lattices and geometries impossible with traditionally manufactured alumina.
Lower Cost, Faster
No tooling or molds — lower production cost and a faster development cycle.
Extreme Performance
Max working temperature of 1,500 °C and flexural strength over 400 MPa.
Features

Applications and properties.

Alumina 4N ceramic parts under a torch flame

Thermal protection

Heat and electrical insulators — spark plug insulators, insulating housings and tubes — rated to 1,500 °C.

1,500 °C
Ceramic parts sintering in a kiln

Printed, then sintered

Printed green parts are washed in Ceramic Wash Solution and fired to dense, 99.99% pure alumina.

98.6% density
Molten metal poured through an Alumina 4N ceramic part

Foundry tools for metal casting

Cores, crucibles, gating, sprues, mixing tools and metal filters that withstand molten metal.

Foundry tooling
Lattice ceramic catalyst part by Bosch Advanced Ceramics

Lattices and internal channels

Formlabs customer Bosch Advanced Ceramics produces complex lattice parts that molding can’t make.

Customer story
Works With

Printers and post-processing.

Wash and post-cure to reach the published properties.

Formlabs Form 4 resin 3D printer
Form 4
Choose the 0.78 L Form 4 cartridge. View Form 4 →
Formlabs Form 3 laser SLA 3D printer
Form 3
Choose the 0.78 L Form 3 cartridge. View Form 3 →
Formlabs Ceramic Wash Solution 5 L
Ceramic Wash Solution
Required wash for Alumina 4N parts. View →
In the Box

Available sizes:

Choose the size in the buy box above.

0.78 L cartridge — Form 40.78 L cartridge — Form 3Bulk: 15% off at 30 L → 45% off at 3,000 L
Compare

Formlabs heat-resistant materials compared.

From Formlabs’ published tech specs.

PropertyAlumina 4NHigh TempRigid 10K
Material99.99% pure alumina technical ceramicPhotopolymerHighly glass-filled photopolymer
TemperatureMax working temperature 1,500 °CHDT 238 °C @ 0.45 MPaHDT 238 °C @ 0.45 MPa
Flexural strength> 400 MPa97 MPa158 MPa
Extra workflowCeramic wash, debinding and sinteringThermal post-curePost-cure
Entry price$1,299 (0.78 L)$199 (1 L)$299 (1 L)

Browse all Formlabs resins or the Formlabs brand page.

Specifications

Formlabs Alumina 4N Resin Technical Data

Compatible Printers
Form 4, Form 4B, Form 3, Form 3B, Form Studio 1
Compatible Tanks
Form 4 Resin Tank, Form 3 Resin Tank V2.1, Form Studio Resin Tank Pro
Compatible Build Platforms
Form 4 / Form 4 Flex, Form 3 Stainless Steel, Form Studio Standard / Flex
Print Technology
SLA
Category
High Stiffness, Temperature Resistant, Specialty
Color
White
Minimum Layer Thickness
50 microns
Sizes
0.78 L cartridge — Form 4 · 0.78 L cartridge — Form 3
Purity
99.99% alumina (Al₂O₃)
Relative Density
98.6%
Flexural Strength
> 400 MPa
Shore Hardness
70D
Max Working Temperature
1,500 °C
Required Wash
Ceramic Wash Solution
Shelf Life
3 months at room temp; up to +12 months refrigerated (−25 to 4 °C)
SKU
RS-C2-AL4N-01 (0.78 L) / RS-F2-AL4N-01 (0.78 L)

RESOURCES

Downloads & Technical Support

Everything you need to choose and run Formlabs Alumina 4N Resin with confidence.

Alumina 4N Resin Technical Data
Formlabs-published specifications, compatibility, and what is included.
View specifications →
Resin Print & Post-Processing Guide
Formlabs-recommended wash and post-cure settings and handling for this resin.
Rev1 Technical Support
Application review, sample prints, and post-sales engineering guidance from Rev1 Technologies.

WHY REV1 TECH

Authorized Formlabs Reseller. Resin & SLS Production Specialists.

Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.

YOUR REV1 PARTNER
AUTHORIZED FORMLABS RESELLER
01
Application Engineering
We help you choose the right Formlabs resin for your parts and set up wash and cure.
02
Onboarding & Training
Rev1 handles setup and operator training on PreForm, Dashboard, and the print-to-post workflow.
03
Ongoing Support
Direct access to Rev1’s technical team for resin guidance, troubleshooting, and maintenance.
04
Free Sample Print
Send us your STL. We’ll arrange a Formlabs sample part and ship it to you — or get an instant print quote.
05
In-Person Demo
Visit our Auburn Hills facility or schedule a demo at your site.
06
Consumables & Parts
Genuine Formlabs resins, tanks, build platforms, and post-processing — sourced and supported from the USA.
Buyer FAQ

Formlabs Alumina 4N Resin — questions buyers ask.

What do I need besides the resin?
A wash in Formlabs Ceramic Wash Solution is required for Alumina 4N parts, followed by Formlabs’ ceramic firing workflow.
How pure and dense are parts?
99.99% pure alumina at 98.6% relative density, comparable to traditionally manufactured alumina.
How should I store it?
Shelf life is 3 months at room temperature; refrigerating at −25 to 4 °C adds up to 12 months.
Which printers can use it?
Form 4, Form 4B, Form 3, Form 3B and Form Studio 1 — choose the 0.78 L cartridge for your printer generation.
Are there volume discounts?
Formlabs offers bulk order discounts from 15% at 30 L up to 45% at 3,000 L. Ask Rev1 for volume pricing.
What is it used for?
Formlabs recommends it for high-voltage components: enclosures, connector housings, terminal blocks; thermal protection: spark plug insulators, insulating housings or tubes; chemical resistance: manifold pipes, mixing blades; foundry tools: cores, crucibles, gating, sprues, thermocouple sheaths, metal filters.

PRINT WITH GENUINE FORMLABS RESIN

Print with Formlabs Alumina 4N Resin

Order Alumina 4N Resin, or talk to a Rev1 specialist about the right engineering resin and volume pricing for your parts.

Reply within 1 business day We validate fit — not just take orders Authorized Formlabs reseller in the USA US support & training

Auburn Hills, Michigan's premier source for industrial 3D printers, 3D scanners, materials, and software. Serving engineers and manufacturers across North America.

Products
Company
Contact
Payment methods
AMEXApple PayGoogle PayPayPalShop PayUnionPayVISA
Pay over time

© 2026 Rev1 Technologies. All rights reserved.